Establishment profile
ANCHOR DANLY
3650 S DERENZY RD, BELLAIRE, MI, 49615
Operated by Anchor Danly, LLC
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
ANCHOR DANLY has accumulated 28 OSHA violations across 2 inspections over 20 years of recorded history, with $5,338 in total assessed penalties.
The establishment sits in the 83rd percentile for violations within its industry-state peer group of 1,101 employers. Inspection frequency runs at the 45th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ANCHOR DANLY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $5,338 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 4081.072701 | 2 | 2 | $1,350 | Jul 2006 | Apr 2009 |
| 29 CFR 1910.0169 B03 I | 2 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 4081.073101 | 1 | 1 | $550 | Jul 2006 | Jul 2006 |
| 29 CFR 4081.241101 | 1 | 1 | $550 | Jul 2006 | Jul 2006 |
| 29 CFR 4081.246307 C | 1 | 1 | $550 | Jul 2006 | Jul 2006 |
| 29 CFR 4081.003407 | 1 | 1 | $550 | Jul 2006 | Jul 2006 |
| 29 CFR 4081.247701 | 1 | 1 | $550 | Jul 2006 | Jul 2006 |
| 29 CFR 4081.1441 | 1 | 1 | $413 | Jul 2006 | Jul 2006 |
| 29 CFR 4081.264801 | 1 | 1 | $413 | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $413 | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 1910.0305 B02 I | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 4081.400704 | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 4081.400707 | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0304 A02 | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0304 F04 | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Jul 2006 | Jul 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within MI. Peer group: 1,101 employers. This establishment has 28 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 74 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ANCHOR DANLY. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ANCHOR DANLY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ANCHOR DANLY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ANCHOR DANLY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ANCHOR DANLY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ANCHOR DANLY. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ANCHOR DANLY. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-03-31 | Planned | 3 | — | $800 | |
| 2006-05-19 | Planned | 25 | 12 | $4,538 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
ANCHOR DANLY is one of 1 establishments rolled up under the parent organization Anchor Danly, LLC.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Anchor Danly, LLC across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within MI, ordered by federal enforcement volume:
- QUALITY METALCRAFT INCLIVONIA — 3 federal enforcement records
- AUTODIE INTERNATIONAL INCGRAND RAPIDS — 3 federal enforcement records
- EXCO EXTRUSION DIES INCCHESTERFIELD — 3 federal enforcement records
- MARTINREA FABCO HOT STAMPING INCDETROIT — 3 federal enforcement records
- OVIDON MFG LLCHOWELL — 2 federal enforcement records
- NORTHERN MACHINE TOOL COMPANYMUSKEGON — 2 federal enforcement records
- OTTAWA GAGE INCHOLLAND — 2 federal enforcement records
- ETM ENTERPRISES INCGRAND LEDGE — 2 federal enforcement records
- MODELS & TOOLS INCSHELBY TOWNSHIP — 2 federal enforcement records
- BAKER INDUSTRIES, INC.MACOMB — 2 federal enforcement records
Related searches
- All Anchor Danly, LLC locationsParent rollup
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in MIState-wide enforcement data
- Special Die and in MIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ANCHOR DANLY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Anchor Danly, LLC.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ANCHOR DANLY's OSHA violation history?
- ANCHOR DANLY has 2 OSHA inspections on record with 28 violations and $5,337.5 in total penalties.
- How does ANCHOR DANLY's safety record compare to its industry?
- ANCHOR DANLY operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. ANCHOR DANLY's self-reported DART rate is 3.2 compared to an industry average of 1.4.