Establishment profile
AMERICAN SHEET METAL AND WELDING
2713 COLLEY AVENUE, NORFOLK, VA, 23517
332322 — Sheet Metal Work Manufacturing
Summary
AMERICAN SHEET METAL AND WELDING has accumulated 23 OSHA violations across 4 inspections over 29 years of recorded history, with $5,040 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 465 employers. Inspection frequency runs at the 77th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMERICAN SHEET METAL AND WELDING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $5,040 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0303 G01 II | 2 | 2 | $1,085 | Mar 1997 | Jul 2012 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $2,100 | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0157 C04 | 1 | 1 | $420 | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $420 | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $350 | Mar 1997 | Mar 1997 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $350 | Mar 1997 | Mar 1997 |
| 29 CFR 1910.0134 E01 | 1 | 1 | $315 | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0305 A02 II | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0305 A02 X | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0157 E01 | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0304 G05 | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0134 C02 II | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Jul 2012 | Jul 2012 |
| 29 CFR 1910.0305 B02 | 1 | 1 | — | Mar 1997 | Mar 1997 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | — | Mar 1997 | Mar 1997 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Mar 1997 | Mar 1997 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within VA. Peer group: 465 employers. This establishment has 23 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for AMERICAN SHEET METAL AND WELDING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMERICAN SHEET METAL AND WELDING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMERICAN SHEET METAL AND WELDING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMERICAN SHEET METAL AND WELDING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMERICAN SHEET METAL AND WELDING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMERICAN SHEET METAL AND WELDING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMERICAN SHEET METAL AND WELDING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AMERICAN SHEET METAL AND WELDING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-07-06 | Referral | 3 | 3 | $315 | |
| 2012-06-21 | Complaint | 12 | 10 | $3,675 | |
| 1997-04-07 | Planned | 0 | — | $0 | |
| 1996-12-12 | Planned | 8 | 4 | $1,050 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within VA, ordered by federal enforcement volume:
- BROOKFIELD MACHINE & WELDING CO., INC.MECHANICSVILLE — 2 federal enforcement records
- AIRWAY SHEET METAL CO., INC.STERLING — 2 federal enforcement records
- HALL'S MECHANICAL SERVICES LLCFIELDALE — 2 federal enforcement records
- IMPERIAL GROUP MANUFACTURING, INC.DUBLIN — 2 federal enforcement records
- SHEET METAL PRODUCTS, INC.FRANKLIN — 1 federal enforcement record
- STERLING SHEET METALSTERLING — 1 federal enforcement record
- LEE-HIGH SHEET METAL INC.FAIRFAX — 1 federal enforcement record
- ACOUSTICAL SHEETMETAL COMPANY LLCVIRGINIA BEACH — 1 federal enforcement record
- NZO, LLC DBA CENTRAL VIRGINIA MANUFACTURINGBEDFORD — 1 federal enforcement record
- HAMPTON SHEET METALNEWPORT NEWS — 1 federal enforcement record
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in VAState-wide enforcement data
- Sheet Metal Work in VAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMERICAN SHEET METAL AND WELDING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMERICAN SHEET METAL AND WELDING's OSHA violation history?
- AMERICAN SHEET METAL AND WELDING has 4 OSHA inspections on record with 23 violations and $5,040 in total penalties.
- How does AMERICAN SHEET METAL AND WELDING's safety record compare to its industry?
- AMERICAN SHEET METAL AND WELDING operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3.