Summary
ALLWAY TOOLS INC. has accumulated 36 OSHA violations across 7 inspections over 51 years of recorded history, with $17,415 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 27 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ALLWAY TOOLS INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $17,380 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $1,543 | Jan 1975 | Oct 2007 |
| 29 CFR 1910.0307 B | 1 | 1 | $1,750 | Feb 2008 | Feb 2008 |
| 29 CFR 1910.0179 J03 | 1 | 1 | $1,750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | $1,750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0120 Q01 | 1 | 1 | $1,400 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $1,400 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $1,400 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0151 C | 1 | 1 | $1,400 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $963 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0219 C03 | 1 | 1 | $963 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | $963 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $675 | Mar 1996 | Mar 1996 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | $425 | Mar 1996 | Mar 1996 |
| 29 CFR 1910.0217 C02 ID | 1 | 1 | $210 | Feb 1988 | Feb 1988 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $210 | Feb 1988 | Feb 1988 |
| 29 CFR 1910.0217 C02 IA | 1 | 1 | $210 | Feb 1988 | Feb 1988 |
| 29 CFR 1910.0217 C02 III | 1 | 1 | $210 | Feb 1988 | Feb 1988 |
| 29 CFR 1910.0036 B04 | 1 | 1 | $70 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0037 K02 | 1 | 1 | $50 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0037 Q02 | 1 | 1 | $40 | Jan 1975 | Jan 1975 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3322 within NY. Peer group: 27 employers. This establishment has 36 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 93 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ALLWAY TOOLS INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ALLWAY TOOLS INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ALLWAY TOOLS INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ALLWAY TOOLS INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ALLWAY TOOLS INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ALLWAY TOOLS INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ALLWAY TOOLS INC 1255 SEABURY AVE · BRONX, NY, 10462 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ALLWAY TOOLS INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2009-11-26$2,280
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-03-16$2,218
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2008-12-09$2,070
- General Services AdministrationTAS::47 4534 001::TAS SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-08-04$1,976
- General Services AdministrationTAS::47 4534 001::TAS SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-05-27$1,824
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2008-10-28$1,805
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2008-03-27$1,794
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-03-31$1,730
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-03-09$1,672
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2009-09-23$1,672
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2009-03-05$1,672
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2008-09-09$1,656
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2007-10-02$1,584
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2007-10-02$1,544
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2009-07-03$1,520
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2008-01-16$1,452
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZcontract · Last action 2008-06-24$1,380
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2008-04-08$1,378
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2009-11-24$1,368
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-11-25$1,327
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2008-05-16$1,324
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2008-07-03$1,311
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-01-28$1,308
- General Services AdministrationTAS::47 4534 001::TAS SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-12-08$1,216
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-01-09$1,180
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-09-29$1,145
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-09-29$1,130
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2011-01-10$1,064
- General Services AdministrationTAS::47 4534 001::TAS SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-11-04$1,064
- General Services AdministrationTAS::47 4534 001::TAS SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-06-14$1,064
- General Services AdministrationTAS::47 4534 001::TAS SCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-05-06$1,064
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2010-02-03$1,064
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2009-07-24$1,064
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2007-12-17$1,060
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-02-17$1,058
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-05-31$1,050
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-10-21$1,016
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-12-09$1,008
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-03-11$1,002
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-12-27$989
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-01-19$977
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2011-01-25$964
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-10-07$956
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-10-05$922
- General Services AdministrationSCRAPER, GLASS, RAZOR BLADE: THE SCRAPER BLADE H OLDER SHALL ACCOMMODATE A STANDARD SINGLE EDGE R AZOR BLADE. DIMENSION: THE SCRAPER SHALL BE 1-5/ 8" WIDE BY 1/4" THICK. MATERIAL: THE SCRAPER HOU SING SHALL BE METAL AND HAVE A CORROSION RESISTA NT FINISH. FEATURES: WHEN THE BLADE IS RETRACTED , THE HOLDER SHALL COVER THE BLADE COMPLETELY. A MEANS SHALL BE PROVIDED TO LOCK THE BLADE SECUR ELY IN THE EXTENDED POSITION. FIVE (5) STANDARD SINGLE-EDGED RAZOR BLADES SHALL BE INCLUDED. (PA RTIAL DESCRIPTION)contract · Last action 2009-06-09$912
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-08-10$909
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-11-26$909
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2009-12-15$907
- General Services AdministrationBLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2008-07-02$903
- General Services AdministrationTAS::47 4534 001::TAS BLADE, CRAFTSMAN KNIFE: MSP - 45,805contract · Last action 2010-09-24$890
Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2011-01-25. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-09-17 | Planned | 13 | 11 | $10,850 | |
| 2007-09-06 | Planned | 6 | 5 | $3,850 | |
| 1996-02-09 | Planned | 3 | 3 | $1,650 | |
| 1988-02-08 | Planned | 8 | 4 | $840 | |
| 1983-11-29 | Planned | 0 | — | $0 | |
| 1975-02-19 | Follow-up | 0 | — | $0 | |
| 1975-01-09 | Planned | 6 | — | $225 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within NY, ordered by federal enforcement volume:
- CHESTER MFG. CO.TONAWANDA — 1 federal enforcement record
- CSW OF NY, INC.ROCHESTER — 1 federal enforcement record
- BEJA PRECISION MANUFACTURING INC.ROCHESTER — 1 federal enforcement record
- AMES TRUE TEMPER, INC.PINE VALLEY — 1 federal enforcement record
- ROBINSON TOOLS LLCPENFIELD — 1 federal enforcement record
- CHESTER MANUFACTURING COMPANYTONAWANDA — 1 federal enforcement record
- EAGLE MACHINE & TOOL CO, INCBRONX — 1 federal enforcement record
- UNION TOOLS INC.FRANKFORT — 1 federal enforcement record
- GEI INTERNATIONALEAST SYRACUSE — 1 federal enforcement record
- BURRELL CUTLERY CO INCELLICOTTVILLE — 1 federal enforcement record
Related searches
- NAICS 332All employers in this industry
- Employers in NYState-wide enforcement data
- Industry in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ALLWAY TOOLS INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ALLWAY TOOLS INC.'s OSHA violation history?
- ALLWAY TOOLS INC. has 7 OSHA inspections on record with 36 violations and $17,415 in total penalties.