Establishment profile
ALEXANDRIA COATINGS L.L.C.
9418 GUNSTON COVE RD, LORTON, VA, 22079
332812 — Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
Summary
ALEXANDRIA COATINGS L.L.C. has accumulated 10 OSHA violations across 8 inspections over 16 years of recorded history, with $12,633 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 100 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ALEXANDRIA COATINGS L.L.C. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $12,633 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0132 F02 | 1 | 1 | $5,033 | Apr 2025 | Apr 2025 |
| 29 CFR 1910.1025 D02 | 1 | 1 | $3,525 | Mar 2024 | Mar 2024 |
| 29 CFR 1910.0179 J03 | 1 | 1 | $1,980 | Oct 2023 | Oct 2023 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,360 | Oct 2023 | Oct 2023 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | $735 | Apr 2015 | Apr 2015 |
| 29 CFR 1910.1025 L01 I | 1 | 1 | — | Mar 2024 | Mar 2024 |
| 29 CFR 1910.0219 C03 | 1 | 1 | — | Oct 2023 | Oct 2023 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Apr 2015 | Apr 2015 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | — | Apr 2015 | Apr 2015 |
| 29 CFR 1910.0124 H04 | 1 | 1 | — | Apr 2015 | Apr 2015 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3328 within VA. Peer group: 100 employers. This establishment has 10 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ALEXANDRIA COATINGS L.L.C.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ALEXANDRIA COATINGS L.L.C.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ALEXANDRIA COATINGS L.L.C.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ALEXANDRIA COATINGS L.L.C.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ALEXANDRIA COATINGS L.L.C.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ALEXANDRIA COATINGS L.L.C.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ALEXANDRIA COATINGS L.L.C.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ALEXANDRIA COATINGS L.L.C.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- National Aeronautics and Space AdministrationSB SET-ASIDE, 42 OFFERS BPA VENDORS SHALL PROVIDE FABRICATION SERVICES AT VENDORS SITE&SUPPLIES TO GSFC IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS SPACE FLIGHT&NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS.contract · Last action 2025-07-01$110,184
- National Aeronautics and Space AdministrationCOMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.contract · Last action 2013-09-26$93,681
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2020-02-03$90,609
- Department of DefenseANODIZE 00818M1301-101contract · Last action 2023-03-28$58,972
- National Aeronautics and Space AdministrationCERTIFICATE OF COMPLIANCE; 8 SETS OF GOLD-PLATED ANTENNAS MAST, CIRCUITS, V-BLOCKcontract · Last action 2011-12-08$47,407
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2023-09-13$41,967
- Department of DefenseANODIZE 00818M1301-101contract · Last action 2021-05-25$32,092
- Department of DefenseANODIZE 13021M1307-101contract · Last action 2022-06-08$29,595
- National Aeronautics and Space AdministrationCOMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.contract · Last action 2014-06-05$28,092
- Department of DefenseANODIZED ALUMINUM PLATEScontract · Last action 2022-07-28$19,155
- Department of JusticeIGF::OT::IGF BPA FOR VARIOUS METAL FINISHING REQUIREMENTS SUCH AS ANODIZING, PLATING, CHEMICAL FILM, PASSIVATION, ETC.contract · Last action 2015-01-23$15,000
- Department of JusticeIGF::OT::IGF BPA FOR METAL FINISHING SERVICEScontract · Last action 2013-11-13$15,000
- Department of JusticeIGF::OT::IGF - METAL FINISHING SERVICES AND SUPPLIES - BLANKET PURCHASE AGREEMENTcontract · Last action 2012-11-13$15,000
- Department of DefenseP/N: 00818M1301-101contract · Last action 2020-06-09$14,867
- Department of JusticeMETAL FINISHING SERVICES 10/1/11 - 9/30/12contract · Last action 2011-11-17$14,207
- Department of JusticeIGF::OT::IGF VARIOUS METAL FINISHING REQUIREMENTS SUCH AS ANODIZING, PLATING, CHEMICAL FILM, PASSIVATION, ETC.contract · Last action 2016-10-27$13,384
- Department of DefenseDUPLEX ELECTROLESS NICKEL PLATINGcontract · Last action 2010-06-29$13,140
- Department of DefenseANODIZE CARGO ROLLER RAILcontract · Last action 2021-11-09$12,578
- Department of DefenseSILVER PLATING BUS BARScontract · Last action 2021-03-09$11,829
- National Aeronautics and Space AdministrationGOLD PLATING SMB SHELLS. SHIPPINGcontract · Last action 2013-01-17$9,527
- Department of DefenseFINISHING SERVICEScontract · Last action 2008-05-06$7,888
- Department of DefenseSILVER PLATING SERVICEcontract · Last action 2024-11-18$6,356
- Department of JusticeIGF::OT::IGFcontract · Last action 2017-12-04$6,219
- National Aeronautics and Space AdministrationPLATING OF AN MMS ANTENNAcontract · Last action 2011-03-30$5,002
- Department of DefenseSILVER PLATINGcontract · Last action 2010-08-25$5,000
- Department of JusticeL BRACKETS 5"X3.25"X4"contract · Last action 2012-08-07$4,650
- Department of CommerceEQUIPMENT REPAIRcontract · Last action 2018-11-16$4,275
- Department of JusticeIGF::OT::IGFcontract · Last action 2018-10-15$2,439
- Department of DefenseMETAL PLATING AND TREATMENTS TO BE APPLIED TO VARIOUS PROGRAM PARTS AT LETTERKENNY ARMY DEPOT.contract · Last action 2019-10-21$515
- Department of DefenseMETAL PLATING AND TREATMENTS TO BE APPLIED TO VARIOUS PROGRAM PARTS AT LETTERKENNY ARMY DEPOT.contract · Last action 2020-02-26$450
- Department of DefenseMETAL PLATING AND TREATMENTS TO BE APPLIED TO VARIOUS PROGRAM PARTS AT LETTERKENNY ARMY DEPOT.contract · Last action 2019-07-03$300
- Department of Homeland SecurityRUDDER TAB: COMMERCIAL SPARE PARTS FOR HC144contract · Last action 2013-10-22$300
- Department of Homeland SecurityANOTISE PARTS: COMMERCIAL SPARE PARTS FOR HC144contract · Last action 2013-07-09$300
- National Aeronautics and Space AdministrationSB SET-ASIDE, 42 OFFERS.BPA VENDORS SHALL PROVIDE FABRICATION SERVICES AT VENDORS SITE&SUPPLIES TO GSFC IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS SPACE FLIGHT&NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. .contract · Last action 2025-05-12$0
- Department of DefenseHARDWARE AND COMPONENTScontract · Last action 2025-03-10$0
- Department of DefensePERFORM METAL PLATING AND TREATMENTS IN SUPPORT OF ALL PROGRAMS ON LETTERKENNY ARMY DEPOT.contract · Last action 2020-10-06$0
- Department of DefenseBPA COMBINED SYN/SOL N00178-17-T-0027, HARDWARE AND COMPONENTScontract · Last action 2019-12-03$0
- National Aeronautics and Space AdministrationIGF::OT::IGF SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.contract · Last action 2019-08-15$0
- Department of DefenseNEW MASTER BPAcontract · Last action 2019-04-10$0
- Department of DefenseFINAL PROTECTIVE FINISHINGcontract · Last action 2017-06-26$0
- Department of DefenseBPA HARDWARE AND COMPONENTS N00178-11-Q-4233contract · Last action 2016-02-16$0
- Department of DefenseANODIZE SERVICEcontract · Last action 2012-03-20$0
- National Aeronautics and Space AdministrationCOMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.contract · Last action 2010-09-13$0
Federal contract dollars to this establishment. Primary NAICS: 332813 - ELECTROPLATING, PLATING, POLISHING, ANODIZING, AND COLORING. Last action: 2025-07-01. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-10-10 | Referral | 1 | 1 | $5,033 | |
| 2023-09-26 | Planned | 3 | 3 | $3,340 | |
| 2023-09-26 | Programmed Related | 2 | 2 | $3,525 | |
| 2015-02-03 | Planned | 4 | 3 | $735 | |
| 2010-11-03 | Planned | 0 | — | $0 | |
| 2010-03-10 | Planned | 0 | — | $0 | |
| 2010-03-10 | Planned | 0 | — | $0 | |
| 2010-01-28 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within VA, ordered by federal enforcement volume:
- COMMONWEALTH GALVANIZINGASHLAND — 2 federal enforcement records
- EPACOAT INCHENRICO — 2 federal enforcement records
- TITMUS OPTICAL, INC.PETERSBURG — 1 federal enforcement record
- S K VENTURES INCGLEN ALLEN — 1 federal enforcement record
- CREATIVE COATINGS, INC.FRONT ROYAL — 1 federal enforcement record
- ALLIANCE MACHINE AND ENGRAVING, LLC.ASHLAND — 1 federal enforcement record
- FINE ARTS ENGRAVING CO.LORTON — 1 federal enforcement record
- BOILER THERMAL SERVICES, LLCMIDLOTHIAN — 1 federal enforcement record
- COATINGS USA LLCFRONT ROYAL — 1 federal enforcement record
- LYNCHBURG POWDER COATINGLYNCHBURG — 1 federal enforcement record
Related searches
- Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to ManufacturersAll employers in this industry
- Employers in VAState-wide enforcement data
- Metal Coating, Engraving in VAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ALEXANDRIA COATINGS L.L.C. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ALEXANDRIA COATINGS L.L.C.'s OSHA violation history?
- ALEXANDRIA COATINGS L.L.C. has 8 OSHA inspections on record with 10 violations and $12,632.5 in total penalties.
- How does ALEXANDRIA COATINGS L.L.C.'s safety record compare to its industry?
- ALEXANDRIA COATINGS L.L.C. operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.