Establishment profile
ADVANCED MOLDING TECHNOLOGY, INC.
729 LUNT AVENUE, SCHAUMBURG, IL, 60193
326199 — All Other Plastics Product Manufacturing
Summary
ADVANCED MOLDING TECHNOLOGY, INC. has accumulated 19 OSHA violations across 5 inspections over 46 years of recorded history, with $5,593 in total assessed penalties.
The establishment sits in the 89th percentile for violations within its industry-state peer group of 670 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED MOLDING TECHNOLOGY, INC. appears in OSHA workplace safety and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 19 citations in this view · $5,593 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 2 | 2 | $1,000 | Mar 1980 | May 2003 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,250 | May 2003 | May 2003 |
| 29 CFR 1904.0017 B | 1 | 1 | $700 | Dec 2000 | Dec 2000 |
| 29 CFR 1910.0132 D01 | 1 | 1 | $613 | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $613 | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $500 | May 2003 | May 2003 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $368 | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $350 | May 2003 | May 2003 |
| 29 CFR 1910.0309 A 011017 | 1 | 1 | $200 | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | May 2003 | May 2003 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | May 2003 | May 2003 |
| 29 CFR 1910.0138 A | 1 | 1 | — | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0335 A01 I | 1 | 1 | — | Feb 2002 | Feb 2002 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0309 A 011022 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0037 Q02 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0023 C01 | 1 | 1 | — | Mar 1980 | Mar 1980 |
| 29 CFR 1910.0022 B01 | 1 | 1 | — | Mar 1980 | Mar 1980 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3261 within IL. Peer group: 670 employers. This establishment has 19 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED MOLDING TECHNOLOGY, INC.. Verify directly with Environmental Protection Agency →
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-04-29 | Planned | 6 | 5 | $2,500 | |
| 2002-02-07 | Complaint | 6 | 5 | $1,593 | |
| 2000-11-16 | Other | 1 | — | $700 | |
| 1983-04-18 | Complaint | 0 | — | $0 | |
| 1980-02-26 | Complaint | 6 | 1 | $800 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other plastics product manufacturing within IL, ordered by federal enforcement volume:
- PACTIV LLCBRIDGEVIEW — 3 federal enforcement records
- MAGENTA, LLCCHICAGO — 3 federal enforcement records
- GRAHAM PACKAGING COMPANY, LPVANDALIA — 3 federal enforcement records
- BERRY PLASTICS CORP.ALSIP — 3 federal enforcement records
- NEW WINCUP HOLDINGS, INC.WEST CHICAGO — 2 federal enforcement records
- SOLO CUP OPERATING CORPORATIONURBANA — 2 federal enforcement records
- DURACO PRODUCTS, INC.STREAMWOOD — 2 federal enforcement records
- PRETIUM PACKAGING, L.L.C.PERU — 2 federal enforcement records
- ROGAN CORPNorthbrook — 2 federal enforcement records
- THE LAKONE COMPANYMONTGOMERY — 2 federal enforcement records
Related searches
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in ILState-wide enforcement data
- All Other Plastics in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADVANCED MOLDING TECHNOLOGY, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED MOLDING TECHNOLOGY, INC.'s OSHA violation history?
- ADVANCED MOLDING TECHNOLOGY, INC. has 5 OSHA inspections on record with 19 violations and $5,592.5 in total penalties.
- How does ADVANCED MOLDING TECHNOLOGY, INC.'s safety record compare to its industry?
- ADVANCED MOLDING TECHNOLOGY, INC. operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.