Summary
ADVANCED MATERIALS TECH has no OSHA inspection history on file. Federal records covering wage, environmental, labor relations, and other agencies are noted below where present.
The most recent federal enforcement activity was recorded 0 days ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED MATERIALS TECH appears in CPSC product recalls record only. No matching records were found in OSHA workplace safety, WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
No OSHA inspections, citations, or accidents on file for ADVANCED MATERIALS TECH. Verify directly with Occupational Safety and Health Administration →
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ADVANCED MATERIALS TECH. Verify directly with OSHA Injury Tracking Application →
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED MATERIALS TECH. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 0 days ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED MATERIALS TECH. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED MATERIALS TECH. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED MATERIALS TECH. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED MATERIALS TECH. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED MATERIALS TECH. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ADVANCED MATERIALS TECH. Verify directly with UVA Corporate Prosecution Registry →
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Federal contracts
This location
- National Aeronautics and Space AdministrationADVANCED MATERIALS TECHNOLOGY, INC (AMTI) RESPONDS TO THE NASA SBIR SOLICITATION X8 "SPACE CRYOGENIC SYSTEMS" UNDER SUBTOPIC X8.01, "CRYOGENIC FLUID TRANSFER AND HANDLING". THE PROPOSED PHASE II SBIR PROGRAM IS AIMED AT DEVELOPING NEW CRYOGENIC INSULATIONS FOR PASSIVE THERMAL CONTROL, RESULTING IN ZERO BOIL-OFF STORAGE OF CRYOGENS. THE PASSIVE THERMAL CONTROL WILL SERVE TO LIMIT THE HEAT LEAK INTO THE CRYOGENIC STORAGE SYSTEM. THE PROPOSED TECHNOLOGY IS EXPECTED TO INCREASE RELIABILITY, INCREASE CRYOGENIC SYSTEM PERFORMANCE, AND IS CAPABLE OF BEING MADE FLIGHT QUALIFIED FOR THE FLIGHT SYSTEMS AND TO MEET EXPLORATION SYSTEMS MISSION REQUIREMENTS. WE WILL CONTINUE TO USE THE TECHNICAL APPROACHES THAT HAVE SHOWN TREMENDOUS POTENTIAL DURING THE SUCCESSFUL PHASE I EFFORT. OUR KEY APPROACH WILL BE BASED ON THE DEVELOPMENT, FABRICATION, AND CHARACTERIZATION OF ORGANIC-INORGANIC HYBRID NANOCOMPOSITE MICROFOAMS. IN THE PHASE I PROGRAM, WE SUCCESSFULLY DEMONSTRATED THE FEASIBILITY OF FABRICATION OF THESE NEW FOAMS WITH SIGNIFICANTLY IMPROVED MORPHOLOGY AND THERMO-MECHANICAL PROPERTIES. THE PROPOSED APPROACH WILL UTILIZE ENVIRONMENTALLY FRIENDLY BLOWING AGENTS. THE CLOSED CELL STRUCTURE OF THESE NOVEL FOAMS WILL PREVENT THE OCCURRENCE OF CRYOPUMPING. THE PROPOSED EFFORT WILL FURTHER ENHANCE AND OPTIMIZE THE NOVEL MICROFOAMS, SCALE UP THE OPTIMIZED MATERIALS, AND CULMINATE IN THE FABRICATION OF PROTOTYPE MATERIALS TO DEMONSTRATE THE READINESS AND MATURITY OF OUR TECHNIQUES.contract · Last action 2019-06-24$600,000
- National Aeronautics and Space AdministrationADVANCED MATERIALS TECHNOLOGY, INC RESPONDS TO THE NASA SOLICITATION TOPIC X9 ENTITLED "PROPULSION AND PROPELLANT STORAGE" UNDER SUBTOPIC X9.01, "LONG TERM CRYOGENIC PROPELLANT STORAGE, MANAGEMENT, AND ACQUISITION". THE PROPOSED PHASE II PROGRAM WILL FOCUS ON DEVELOPING NEW MULTIFUNCTIONAL INSULATION MATERIALS THAT WILL IMPACT CRYOGENIC SYSTEMS FOR SPACE TRANSPORTATION ORBIT TRANSFER VEHICLES, SPACE POWER SYSTEMS, SPACEPORTS, SPACESUITS, LUNAR HABITATION SYSTEMS, ROBOTICS, AND IN SITU PROPELLANT SYSTEMS. THESE INNOVATIVE MATERIALS WILL BE CAPABLE OF RETAINING STRUCTURAL INTEGRITY WHILE ACCOMMODATING LARGE OPERATING TEMPERATURES RANGING FROM CRYOGENIC TO ELEVATED TEMPERATURES CONDITIONS. THESE ADVANCED MATERIALS CAN BE INCORPORATED INTO THERMAL PROTECTION SYSTEMS (TPS), REDUCING THE AMOUNT OF TPS AND ITS STRUCTURE. WE WILL CONTINUE TO USE THE TECHNICAL APPROACHES THAT HAVE SHOWN TREMENDOUS POTENTIAL DURING THE SUCCESSFUL PHASE I EFFORT. OUR KEY APPROACH WILL BE BASED ON THE DEVELOPMENT, FABRICATION, AND CHARACTERIZATION OF ORGANIC-INORGANIC NANOCOMPOSITE FOAMS. IN THE PHASE I PROGRAM, WE SUCCESSFULLY DEMONSTRATED THE FEASIBILITY OF FABRICATION OF THESE NEW FOAMS WITH SIGNIFICANTLY IMPROVED MECHANICAL PROPERTIES. OUR RESULTS CONFIRMED THAT THE PROPOSED TECHNOLOGY HAVE HIGH POTENTIAL IN DEVELOPING STRONG, LIGHTWEIGHT, CRYOGENIC INSULATION MATERIALS. THE PROPOSED EFFORT WILL FURTHER ENHANCE AND OPTIMIZE THE NOVEL FOAMS, SCALE UP THE OPTIMIZED MATERIALS, AND CULMINATE IN THE FABRICATION OF PROTOTYPE MATERIALS TO DEMONSTRATE THE READINESS AND MATURITY OF OUR TECHNIQUES.contract · Last action 2012-01-19$599,997
- National Aeronautics and Space AdministrationADVANCED MATERIALS TECHNOLOGY, INC (AMTI) RESPONDS TO THE NASA SOLICITATION X10 "CRYOGENIC PROPELLANT STORAGE AND TRANSFER" UNDER SUBTOPIC X.01 "CRYOGENIC FLUID MANAGEMENT TECHNOLOGIES". NASA IS SEEKING FOR TECHNOLOGIES IN ADVANCED CRYOGENIC FLUID STORAGE AND TRANSFER TO REDUCE LAUNCH OPERATION COSTS BY PROVIDING HIGHER EFFICIENCY, LOWER MAINTENANCE AND LONGER LIFE WHILE IMPROVING SAFETY AND MINIMIZING CONSUMABLE LOSSES. TO ADDRESS THE NASA NEEDS, WE PROPOSE TO DEVELOP NOVEL, SPRAYABLE, FIRE RESISTANT, COMPOSITE COATING FOR INSULATION OF ADVANCED CRYOGENIC FLUID STORAGE SYSTEMS. THE NOVEL INSULATIONS WILL OFFER AFFORDABLE COST, HIGH STRENGTH AND FLEXIBILITY, HIGH THERMAL STABILITY, EXCELLENT DURABILITY, AND EASY PROCESSABILITY THROUGH SPRAYING TECHNIQUE, WHICH WILL RESULT IN IMPROVED EFFICIENCY AND RELIABILITY OF THE CRYOGENIC SYSTEMS. ONCE THE FEASIBILITY OF FABRICATION OF LIGHTWEIGHT CRYOGENIC INSULATING MATERIALS BY THE PROPOSED TECHNOLOGY IS DEMONSTRATED IN PHASE I, WE SHALL SCALE-UP THIS TECHNOLOGY IN A PHASE II PROGRAM TO MEET THE NASA'S REQUIREMENTS.contract · Last action 2011-07-26$99,999
- National Aeronautics and Space AdministrationADVANCED MATERIALS TECHNOLOGY, INC (AMTI) RESPONDS TO THE NASA SBIR SOLICITATION X8 "SPACE CRYOGENIC SYSTEMS" UNDER SUBTOPIC X8.01, "CRYOGENIC FLUID TRANSFER AND HANDLING". THE PROPOSED PHASE I SBIR PROGRAM IS AIMED AT DEVELOPING NEW CRYOGENIC INSULATIONS FOR PASSIVE THERMAL CONTROL, RESULTING IN ZERO BOIL-OFF STORAGE OF CRYOGENS. THE PASSIVE THERMAL CONTROL WILL SERVE TO LIMIT THE HEAT LEAK INTO THE CRYOGENIC STORAGE SYSTEM. THE PROPOSED TECHNOLOGY IS EXPECTED TO INCREASE RELIABILITY, INCREASE CRYOGENIC SYSTEM PERFORMANCE, AND IS CAPABLE OF BEING MADE FLIGHT QUALIFIED FOR THE FLIGHT SYSTEMS AND TO MEET EXPLORATION SYSTEMS MISSION REQUIREMENTS. WE PROPOSE TO DEVELOP ADVANCED CLOSED CELL ORGANIC/INORGANIC HYBRID MICROFOAMS OFFERING AFFORDABLE COST, LIGHTWEIGHT, HIGH STRENGTH, LOW THERMAL CONDUCTIVITY, HIGH THERMAL STABILITY, AND EASY PROCESSABILITY WHICH WILL RESULT IN IMPROVED EFFICIENCY AND RELIABILITY OF THE CRYOGENIC SYSTEMS. THE PROPOSED APPROACH WILL BE ENVIRONMENTALLY FRIENDLY AND WILL NOT EMIT ANY VOLATILE ORGANIC COMPOUND (VOC). THE CLOSED CELL STRUCTURE OF THESE NOVEL FOAMS WILL PREVENT THE OCCURRENCE OF CRYOPUMPING. ONCE THE FEASIBILITY OF FABRICATION OF STRONG, LIGHTWEIGHT CRYOGENIC INSULATING MATERIALS BY THE PROPOSED TECHNOLOGY IS DEMONSTRATED IN PHASE I, WE SHALL SCALE-UP THIS TECHNOLOGY IN A PHASE II PROGRAM TO MEET THE NASA'S REQUIREMENTS.contract · Last action 2010-01-29$99,999
- National Aeronautics and Space AdministrationNOVEL MATERIALS FOR MIRROR SUBSTRATE IN SPACE TELESCOPEScontract · Last action 2008-01-18$99,999
- National Aeronautics and Space AdministrationMOLD AND FOAM, FABRICATION AND ADHESIVE,BARRIER FILM AND FOAM INSTALLATION.contract · Last action 2009-04-28$64,534
Federal contract dollars to this establishment. Primary NAICS: 541712 - RESEARCH AND DEVELOPMENT IN THE PHYSICAL, ENGINEERING, AND LIFE SCIENCES (EXCEPT BIOTECHNOLOGY). Last action: 2019-06-24. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
In the news
Related searches
- Employers in FLState-wide enforcement data
About this data
This profile aggregates federal enforcement records on ADVANCED MATERIALS TECH from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED MATERIALS TECH's OSHA violation history?
- ADVANCED MATERIALS TECH has no OSHA inspections on record.