Establishment profile
ADVANCED FINISHING SYSTEM
2954 GEORGE WASHINGTON MEMORIAL HIGHWAY, HAYES, VA, 23072
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
ADVANCED FINISHING SYSTEM has accumulated 50 OSHA violations across 4 inspections over 25 years of recorded history, with $6,480 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 100 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED FINISHING SYSTEM appears in OSHA workplace safety, UVA Corporate Prosecution Registry, and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $6,480 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0134 D01 I | 2 | 2 | $1,050 | Mar 2007 | May 2014 |
| 29 CFR 1910.0120 Q | 1 | 1 | $1,500 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | $420 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0134 C03 | 1 | 1 | $368 | May 2014 | May 2014 |
| 29 CFR 1910.0132 D01 | 1 | 1 | $368 | May 2014 | May 2014 |
| 29 CFR 1910.0124 G01 | 1 | 1 | $368 | May 2014 | May 2014 |
| 29 CFR 1910.0094 C03 | 1 | 1 | $368 | May 2014 | May 2014 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $300 | Aug 2000 | Aug 2000 |
| 29 CFR 1910.0022 A02 | 1 | 1 | $225 | Mar 2007 | Mar 2007 |
| 29 CFR 1910.0036 B04 | 1 | 1 | $225 | Aug 2000 | Aug 2000 |
| 29 CFR 1910.1048 D02 | 1 | 1 | $210 | May 2014 | May 2014 |
| 29 CFR 1910.0178 A06 | 1 | 1 | $180 | Aug 2000 | Aug 2000 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | $158 | May 2014 | May 2014 |
| 29 CFR 1910.1450 E01 | 1 | 1 | $158 | May 2014 | May 2014 |
| 29 CFR 1910.0022 A01 | 1 | 1 | $158 | May 2014 | May 2014 |
| 29 CFR 1910.0120 Q01 | 1 | 1 | $158 | May 2014 | May 2014 |
| 29 CFR 1910.0179 B05 | 1 | 1 | $135 | Aug 2000 | Aug 2000 |
| 29 CFR 1910.0151 C | 1 | 1 | $135 | Aug 2000 | Aug 2000 |
| 29 CFR 1910.0124 H03 | 1 | 1 | — | May 2014 | May 2014 |
| 29 CFR 1910.0107 C07 | 1 | 1 | — | May 2014 | May 2014 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3328 within VA. Peer group: 100 employers. This establishment has 50 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ADVANCED FINISHING SYSTEM. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED FINISHING SYSTEM. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED FINISHING SYSTEM. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED FINISHING SYSTEM. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED FINISHING SYSTEM. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED FINISHING SYSTEM. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED FINISHING SYSTEM. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
First case: 2011-05-02. Most recent: 2011-05-02. Source: UVA Corporate Prosecution Registry — federal pleas, DPAs, and NPAs.
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-12-16 | Referral | 26 | 26 | $2,310 | |
| 2007-02-14 | Referral | 9 | 3 | $3,195 | |
| 2003-07-14 | Planned | 0 | — | $0 | |
| 2000-07-24 | Planned | 15 | 9 | $975 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within VA, ordered by federal enforcement volume:
- GREYSTONE OF VIRGINIA, INC.TOANO — 2 federal enforcement records
- ALEXANDRIA METAL FINISHERS, INC.LORTON — 2 federal enforcement records
- GLOBAL METAL FINISHING, INC.ROANOKE — 2 federal enforcement records
- PRODUCTION METAL FINISHERS, INC.RICHMOND — 2 federal enforcement records
- DWA, INC.RICHMOND — 1 federal enforcement record
- SANDBLAST AMERICA LLCMANASSAS — 1 federal enforcement record
- ELECTROPLATE RITE CORP.DUBLIN — 1 federal enforcement record
- HANKINS & JOHANN INCRICHMOND — 1 federal enforcement record
- ADVANCED METAL FINISHINGROANOKE — 1 federal enforcement record
- HANLON PLATING COMPANY INCRICHMOND — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in VAState-wide enforcement data
- Electroplating, Plating, Polishing, in VAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADVANCED FINISHING SYSTEM from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED FINISHING SYSTEM's OSHA violation history?
- ADVANCED FINISHING SYSTEM has 4 OSHA inspections on record with 50 violations and $6,480 in total penalties.
- How does ADVANCED FINISHING SYSTEM's safety record compare to its industry?
- ADVANCED FINISHING SYSTEM operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.