Establishment profile
ADVANCED CUTTING SYSTEMS INC
4030 PIPER DRIVE, FORT WAYNE, IN, 46809
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
EIN 351878494
Summary
ADVANCED CUTTING SYSTEMS INC has accumulated 8 OSHA violations across 2 inspections over 12 years of recorded history, with $5,750 in total assessed penalties.
The establishment sits in the 59th percentile for violations within its industry-state peer group of 158 employers. Inspection frequency runs at the 48th percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED CUTTING SYSTEMS INC appears in OSHA workplace safety and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 8 distinct standards shown · 8 citations in this view · $5,750 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 2200080101SEC2 | 1 | 1 | $1,250 | Oct 2014 | Oct 2014 |
| 29 CFR 1910.0134 C02 II | 1 | 1 | $1,200 | Aug 2015 | Aug 2015 |
| 29 CFR 1910.0252 C01 IV | 1 | 1 | $1,200 | Aug 2015 | Aug 2015 |
| 29 CFR 1910.0242 A | 1 | 1 | $875 | Oct 2014 | Oct 2014 |
| 29 CFR 1910.0146 C04 | 1 | 1 | $625 | Oct 2014 | Oct 2014 |
| 29 CFR 1910.0134 D01 III | 1 | 1 | $600 | Aug 2015 | Aug 2015 |
| 29 CFR 1910.0134 K06 | 1 | 1 | — | Aug 2015 | Aug 2015 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Aug 2015 | Aug 2015 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3329 within IN. Peer group: 158 employers. This establishment has 8 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 25 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED CUTTING SYSTEMS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED CUTTING SYSTEMS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED CUTTING SYSTEMS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED CUTTING SYSTEMS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED CUTTING SYSTEMS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED CUTTING SYSTEMS INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ADVANCED CUTTING SYSTEMS INC. Verify directly with UVA Corporate Prosecution Registry →
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-02-19 | Referral | 5 | 4 | $3,000 | |
| 2014-04-22 | Complaint | 3 | 3 | $2,750 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous fabricated metal product manufacturing within IN, ordered by federal enforcement volume:
- HAYNES INTERNATIONAL INCKOKOMO — 3 federal enforcement records
- HOLSCHER PRODUCTSFOWLER — 2 federal enforcement records
- WAYNE METALS LLCMARKLE — 2 federal enforcement records
- SCHWAB CORPORATIONCANNELTON — 2 federal enforcement records
- EMS Inc.Sunman — 2 federal enforcement records
- VESTIL MANUFACTURING CORPORATIONANGOLA — 2 federal enforcement records
- JOMAR MACHINING AND FABRICATINGMIDDLEBURY — 2 federal enforcement records
- EATON CORP.AUBURN — 2 federal enforcement records
- THE BRAUN CORPORATIONWINAMAC — 2 federal enforcement records
- HOME PRODUCTS INTL INCSEYMOUR — 2 federal enforcement records
Related searches
- All Other Miscellaneous Fabricated Metal Product ManufacturingAll employers in this industry
- Employers in INState-wide enforcement data
- All Other Miscellaneous in INIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADVANCED CUTTING SYSTEMS INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED CUTTING SYSTEMS INC's OSHA violation history?
- ADVANCED CUTTING SYSTEMS INC has 2 OSHA inspections on record with 8 violations and $5,750 in total penalties.
- How does ADVANCED CUTTING SYSTEMS INC's safety record compare to its industry?
- ADVANCED CUTTING SYSTEMS INC operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6. ADVANCED CUTTING SYSTEMS INC's self-reported DART rate is 3.22 compared to an industry average of 1.4.