Establishment profile
ADAMS TECHNOLOGIES INC. DBA FAB FORM
7667 JENTHER DRIVE, MENTOR, OH, 44060
Summary
ADAMS TECHNOLOGIES INC. DBA FAB FORM has accumulated 29 OSHA violations across 1 inspection over 18 years of recorded history, with $15,000 in total assessed penalties.
The establishment sits in the 83rd percentile for violations within its industry-state peer group of 291 employers. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADAMS TECHNOLOGIES INC. DBA FAB FORM appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $14,550 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 E01 II | 1 | 1 | $2,000 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0217 C05 I | 1 | 1 | $1,175 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,175 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $900 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0217 D09 I | 1 | 1 | $750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0217 C02 IV | 1 | 1 | $750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0217 C03 IVD | 1 | 1 | $750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0305 A02 II | 1 | 1 | $750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0305 G01 IVA | 1 | 1 | $750 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $600 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0219 B01 | 1 | 1 | $600 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0217 B07 II | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0178 G02 | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0157 G02 | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0217 F02 | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0242 B | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3321 within OH. Peer group: 291 employers. This establishment has 29 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ADAMS TECHNOLOGIES INC. DBA FAB FORM. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-08-08 | Complaint | 29 | 22 | $15,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within OH, ordered by federal enforcement volume:
- OMNI MANUFACTURING, INC.SAINT MARYS — 2 federal enforcement records
- ART TECHNOLOGIES, INC.HAMILTON — 2 federal enforcement records
- SECTIONAL STAMPING INC.WELLINGTON — 2 federal enforcement records
- DAYTON ROGERS OF OHIO, INC.COLUMBUS — 2 federal enforcement records
- MANCOR INDUSTRIES, INC.DAYTON — 2 federal enforcement records
- ACKLIN STAMPING CO.TOLEDO — 2 federal enforcement records
- NN METAL STAMPINGS, INC.PIONEER — 2 federal enforcement records
- DUNCAN METAL SPINNING CO.TOLEDO — 2 federal enforcement records
- T & W STAMPINGALLIANCE — 2 federal enforcement records
- TARGET STAMPED PRODUCTS CORP.KINSMAN — 2 federal enforcement records
Related searches
- NAICS 332All employers in this industry
- Employers in OHState-wide enforcement data
- Industry in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADAMS TECHNOLOGIES INC. DBA FAB FORM from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADAMS TECHNOLOGIES INC. DBA FAB FORM's OSHA violation history?
- ADAMS TECHNOLOGIES INC. DBA FAB FORM has 1 OSHA inspection on record with 29 violations and $15,000 in total penalties.