Skip to main content

Establishment profile

ADAM METAL PRODUCTS COMPANY

7 ORBEN DR., LEDGEWOOD, NJ, 07852
335122Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

Download as PDF →

OSHA inspections
13
over 40 years
Violations
64
$52,015 in penalties
SVEP
YES
Severe violator program
Accident investigations on record
4 National Emphasis Program inspections · 4 OSHA follow-ups

Summary

ADAM METAL PRODUCTS COMPANY has accumulated 64 OSHA violations across 13 inspections over 40 years of recorded history, with $52,015 in total assessed penalties.

The establishment sits in the 97th percentile for violations within its industry-state peer group of 37 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 12 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ADAM METAL PRODUCTS COMPANY appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
13
0.3 / yr · last 40 yrs
Violations
64
1.6 / yr
Penalties
$52,015
$813 avg / violation
89% serious11% other
Inspection trigger · planned
5 of 13
Inspection trigger · complaint
4 of 13

62% of inspections at this establishment produced violations, with 8 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 30 citations in this view · $41,285 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
5A000122$3,740Dec 1991Jun 2014
29 CFR 1910.0212 A03 II22$3,050Dec 1991May 1997
29 CFR 1910.1200 H0122$3,000Apr 2011Jun 2014
29 CFR 1910.0217 E01 II22$2,650Dec 1991May 1997
29 CFR 1910.0217 B04 I22$2,375Dec 1991May 1997
29 CFR 1910.1200 E0122$2,010Dec 1991Apr 2011
29 CFR 1910.0217 E01 I22$1,975Dec 1991May 1997
29 CFR 1904.0032 A0422$1,500Apr 2011Jun 2014
29 CFR 1910.0219 D0122$640Nov 1985Dec 1991
29 CFR 1910.0303 G01 I21$500Dec 1991Dec 1991
29 CFR 1910.0147 C07 I A11$6,000Jun 2014Jun 2014
29 CFR 1910.0147 C06 I11$3,000Jun 2014Jun 2014
29 CFR 1910.1200 G0811$1,725Jun 2014Jun 2014
29 CFR 1910.0147 C04 I11$1,680Apr 2011Apr 2011
29 CFR 1910.0303 B01 IV11$1,680Apr 2011Apr 2011
29 CFR 1910.0178 L04 III11$1,680Apr 2011Apr 2011
29 CFR 1910.0242 B11$1,680Apr 2011Apr 2011
29 CFR 1910.0217 C01 I11$800Dec 1991Dec 1991
29 CFR 1910.0110 F04 I11$800Dec 1991Dec 1991
29 CFR 1910.0217 C02 IA11$800Dec 1991Dec 1991

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

97th

Worse on violations than nearly every other employer in NAICS 3351 within NJ. Peer group: 37 employers. This establishment has 64 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
100th
peer median: $2,065
Inspection frequency
100th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ADAM METAL PRODUCTS COMPANY. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.3
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Complaint
4
Referral
1
Follow-up
3

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADAM METAL PRODUCTS COMPANY. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
12 years ago

No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ADAM METAL PRODUCTS COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ADAM METAL PRODUCTS COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ADAM METAL PRODUCTS COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADAM METAL PRODUCTS COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ADAM METAL PRODUCTS COMPANY. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
372897
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ADAM METAL PRODUCTS COMPANY. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2014-03-04Complaint11$2,940
2014-03-04Follow-up3$10,080
2014-03-04Programmed Related43$4,725
2011-03-18Referral0$0
2011-03-09Planned87$8,820
1997-07-18Follow-up0$0
1997-02-25Complaint65$7,650
1993-06-11Programmed Related0$0
1993-06-11Programmed Related0$0
1991-07-10Complaint3534$16,700
1991-07-10Complaint11$800
1985-12-18Follow-up0$0
1985-10-30Planned66$300

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in commercial, industrial, and institutional electric lighting fixture manufacturing within NJ, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ADAM METAL PRODUCTS COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ADAM METAL PRODUCTS COMPANY's OSHA violation history?
ADAM METAL PRODUCTS COMPANY has 13 OSHA inspections on record with 64 violations and $52,015 in total penalties.
How does ADAM METAL PRODUCTS COMPANY's safety record compare to its industry?
ADAM METAL PRODUCTS COMPANY operates in the commercial, industrial, and institutional electric lighting fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.3.