Establishment profile
ACME GALVANIZING, INC.
2730 SOUTH 19TH STREET, MILWAUKEE, WI, 53215
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
ACME GALVANIZING, INC. has accumulated 95 OSHA violations across 15 inspections over 53 years of recorded history, with $42,870 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 227 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ACME GALVANIZING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
73% of inspections at this establishment produced violations, with 9 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3328 within WI. Peer group: 227 employers. This establishment has 95 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 81 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ACME GALVANIZING, INC.. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jun 7, 2011 | STRUCK BY,CRANE OPERATOR,CRANEFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ACME GALVANIZING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ACME GALVANIZING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ACME GALVANIZING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ACME GALVANIZING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ACME GALVANIZING, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ACME GALVANIZING INC 2730 S 19TH ST · MILWAUKEE, WI, 53215 | WaterRCRATRI | No Violation Identified | 0 | 0 | — | May 2021 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ACME GALVANIZING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-03-16 | Referral | 2 | 2 | $6,000 | |
| 2014-03-25 | Complaint | 1 | — | $0 | |
| 2011-06-07 | Accident | 8 | 7 | $19,050 | |
| 2010-07-02 | Complaint | 7 | 6 | $1,400 | |
| 2005-01-20 | Planned | 0 | — | $0 | |
| 2005-01-20 | Planned | 13 | 6 | $5,425 | |
| 2000-01-21 | Complaint | 1 | 1 | $840 | |
| 1996-03-27 | Planned | 21 | 11 | $2,500 | |
| 1994-01-28 | Planned | 14 | 11 | $7,050 | |
| 1985-02-21 | Follow-up | 0 | — | $0 | |
| 1984-09-18 | Planned | 4 | 1 | $180 | |
| 1977-02-10 | Complaint | 0 | — | $0 | |
| 1976-01-20 | Planned | 14 | — | $245 | |
| 1972-11-30 | Complaint | 0 | — | $0 | |
| 1972-07-12 | Accident | 10 | — | $180 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within WI, ordered by federal enforcement volume:
- U S CHROME CORPORATION OF WISCONSINFOND DU LAC — 2 federal enforcement records
- SPECTRUM ALUMINUM FINISHING, INC.MUSKEGO — 2 federal enforcement records
- JAGEMANN PLATING CO. INC.MANITOWOC — 2 federal enforcement records
- ELITE FINISHING LLCMILWAUKEE — 2 federal enforcement records
- INDIANHEAD PLATING, INC.CHIPPEWA FALLS — 2 federal enforcement records
- MILWAUKEE PLATING COMPANYMILWAUKEE — 2 federal enforcement records
- SOUTHWEST METAL FINISHING, INC.NEW BERLIN — 2 federal enforcement records
- PHILLIPS PLATING CORPORATIONPHILLIPS — 2 federal enforcement records
- PIONEER METAL FINISHING LLCGREEN BAY — 2 federal enforcement records
- GREEN BAY ANODIZING, INC.GREEN BAY — 2 federal enforcement records
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in WIState-wide enforcement data
- Electroplating, Plating, Polishing, in WIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ACME GALVANIZING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ACME GALVANIZING, INC.'s OSHA violation history?
- ACME GALVANIZING, INC. has 15 OSHA inspections on record with 95 violations and $42,870 in total penalties.
- How does ACME GALVANIZING, INC.'s safety record compare to its industry?
- ACME GALVANIZING, INC. operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. ACME GALVANIZING, INC.'s self-reported DART rate is 2.42 compared to an industry average of 2.3.
- Has ACME GALVANIZING, INC. had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving ACME GALVANIZING, INC..