Establishment profile
ACCURATE MACHINE & TOOL CORPORATION
226 CELTIC DRIVE, MADISON, AL, 35758
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
ACCURATE MACHINE & TOOL CORPORATION has accumulated 7 OSHA violations across 1 inspection over 3 years of recorded history, with $5,578 in total assessed penalties.
The establishment sits in the 59th percentile for violations within its industry-state peer group of 71 employers. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ACCURATE MACHINE & TOOL CORPORATION appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 7 distinct standards shown · 7 citations in this view · $5,578 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0303 B02 | 1 | 1 | $2,390 | Sep 2023 | Sep 2023 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $2,390 | Sep 2023 | Sep 2023 |
| 29 CFR 1904.0032 B05 | 1 | 1 | $797 | Sep 2023 | Sep 2023 |
| 29 CFR 1910.1450 E01 | 1 | 1 | — | Sep 2023 | Sep 2023 |
| 29 CFR 1910.0134 F02 | 1 | 1 | — | Sep 2023 | Sep 2023 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Sep 2023 | Sep 2023 |
| 29 CFR 1910.1026 D01 | 1 | 1 | — | Sep 2023 | Sep 2023 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3328 within AL. Peer group: 71 employers. This establishment has 7 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: Unknown.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ACCURATE MACHINE AND TOOL 226 CELTIC DRIVE · MADISON, AL, 35758 | Water | Unknown | 4 | 0 | — | Aug 2025 | View → |
ACCURATE MACHINE & TOOL 226 CELTIC DRIVE · MADISON, AL, 35758 | RCRA | No Violation Identified | 0 | 0 | — | Aug 2002 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ACCURATE MACHINE & TOOL CORPORATION. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT-MOBILITY RACKS, F16 PYLON LAUNCHER, JUNCTION BOX, STORAGE RACKScontract · Last action 2022-12-21$616,178
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT - F35 MOBILITY STORAGE RACKScontract · Last action 2023-10-12$514,740
- Department of DefenseF-35 MOBILITY READY STORAGE RACKS. MUNITIONS MATERIAL HANDLING EQUIPMENT.contract · Last action 2022-06-14$487,668
- Department of DefenseMULTIPURPOSE PYLON ADAPTER ASSEMBLY, EMGS MAINTENANCE STAND, EMGS BENCHTOP FIXTURE, JASSM FORK LOCKS, AME SERVICE MODULEcontract · Last action 2023-12-01$322,429
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT MAINTENANCE/LOAD STANDcontract · Last action 2019-04-23$279,200
- Department of DefenseAIM 9X MAINTENANCE TABLE, 2 EACH DELIVERED TO 105 AMMO LOOP ROAD, TYNDALL AFB, FL 323403.contract · Last action 2022-09-30$125,900
- Department of DefenseB-1 INTERNAL STROAGE ADAPTER BEAM&DOLLY; F-16 PYLON LAUNCHcontract · Last action 2019-09-17$117,598
- Department of DefenseTEST STANDcontract · Last action 2018-12-21$113,905
- Department of DefenseB-52 STEEL YOKE ADAPTER ASSEMBLYcontract · Last action 2022-02-28$112,600
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT LAU-118 & MLA STORAGEcontract · Last action 2021-07-13$101,642
- Department of DefenseMUNITION MATERIEL HANDLING EQUIPMENT - MASSIVE ORDINANCE PENETRATOR TAILKIT COVERScontract · Last action 2024-03-21$98,820
- Department of DefenseMUNITION MATERIEL HANDLING EQUIPMENTcontract · Last action 2024-04-02$91,200
- Department of DefenseMMHE AIM-9X MAINTENANCE TABLEcontract · Last action 2017-01-18$89,205
- Department of DefenseTWO PROTOTYPE QS-64 ER. MUNITIONS MATERIAL HANDLING EQUIPMENT.contract · Last action 2023-06-28$87,700
- Department of Defense1 CRL SLING AND DOLLY AND 1 AIM-9X MX TABLE. MUNITIONS MATERIAL HANDLING EQUIPMENT.contract · Last action 2022-12-21$81,683
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT - ARTEC LEO SCANNERcontract · Last action 2022-12-21$78,468
- Department of DefenseBRU-57 LOADING ADAPTERcontract · Last action 2020-08-12$66,559
- Department of Defense30MM AMMO CAN FORKLIFT ADAPTER (P/N X20057690-10) (3 EACH) FIXTURE, SQUIBBING ASSEMBLY (P/N X9926085-10) (4 EACH) AE-40 CHAFF/FLARE TOOL KIT (P/N X20065091-10) (4 EACH) DESQUIBBING TOOL, CHAFF AND FLARE (P/N X20107038-10) (7 EACH)contract · Last action 2023-09-15$63,694
- Department of DefensePROCUREMENT OF QTY 8 EA. MAC III ROLLER CONVEYOR IN ACCORDANCE WITH DRAWING #XP20187100_H.contract · Last action 2024-04-16$58,800
- Department of DefenseMUNITIONS MATERIEL HANDLING EQUIPMENTcontract · Last action 2024-04-02$54,623
- Department of Defense20 MM GUN MAINTENANCE STAND ASSEMBLYcontract · Last action 2019-09-17$42,999
- Department of DefenseMANUFACTURING MUNITIONS HANDLING AND SUPPORT EQUIPMENT.contract · Last action 2022-02-24$40,460
- Department of DefenseOK-542 SENSOR CASEcontract · Last action 2011-06-23$39,211
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENTcontract · Last action 2019-03-26$38,750
- Department of DefenseLARGE STORES LOADING ADAPTER ASSEMBLYcontract · Last action 2025-02-21$33,000
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENTcontract · Last action 2020-11-20$30,356
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT (MMHE) PAINT STAND ASSEMBLY AIM-9contract · Last action 2024-07-11$26,578
- Department of DefenseMUNITIONS MATERIAL HANDLING EQUIPMENT (MMHE) DOLLYcontract · Last action 2021-06-22$26,491
- Department of DefenseSKIDcontract · Last action 2018-03-07$19,970
- Department of DefenseEXTENDED OVERSIZED COMPONENT SKIDScontract · Last action 2016-02-04$17,688
- Department of DefenseTEST WEIGHT KIT.contract · Last action 2021-10-18$16,921
- Department of Defense085 WEAPONS VAULT TRAINERcontract · Last action 2021-05-26$12,757
- Department of DefenseHH-60 ECUcontract · Last action 2018-02-16$10,760
- Department of Defense4518891826!LOCKNUT,TUBE FITTINcontract · Last action 2011-12-15$10,650
- Department of Defense4523908185!SUBSISTENCE PRIME Vcontract · Last action 2013-03-08$9,600
- Department of DefenseLIFT BAR LIGHT WEIGHTcontract · Last action 2025-04-16$9,484
- Department of DefenseLPIA ADAPTER/DOLLYcontract · Last action 2018-08-27$7,950
- Department of DefenseLOAD ADAPTERcontract · Last action 2019-04-03$7,938
- Department of DefenseMOP TAIL COVER - DESICANT BASKET WELDMENT MODIFICATIONcontract · Last action 2025-05-15$6,750
- Department of DefenseMUITIONS MATERIAL HANDLING EQUIPMENTcontract · Last action 2021-03-26$6,250
- Department of Defense8501905700!BEARING,SLEEVEcontract · Last action 2015-04-20$5,775
- National Aeronautics and Space AdministrationSS PLATE AND DRAWINGcontract · Last action 2012-06-13$5,050
- Department of Defense4518404532!ALIGNING TOOLcontract · Last action 2011-07-13$4,850
- Department of Defense4525136818!PLUG SET,PROTECTIVEcontract · Last action 2013-08-06$3,975
- Department of Defense4519047382!LOCKNUT,TUBE FITTINcontract · Last action 2011-09-14$3,550
- Department of DefenseBOMB TURNING TOOLcontract · Last action 2017-12-12$3,500
- Department of Defense4519001571!BOAcontract · Last action 2011-09-09$3,240
- Department of Defense8501854568!LOCKNUT,TUBE FITTINcontract · Last action 2015-02-26$2,970
- Department of DefenseMUNITIONS CONTAINERS, HANDLING, AND SUPPORT EQUIPMENTcontract · Last action 2021-10-21$1,200
- Department of DefenseAMT - HUNTSVILLE DO FOR EWAAC PACcontract · Last action 2021-10-26$1,000
Federal contract dollars to this establishment. Primary NAICS: 332999 - ALL OTHER MISCELLANEOUS FABRICATED METAL PRODUCT MANUFACTURING. Last action: 2026-03-26. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-04-13 | Complaint | 7 | 4 | $5,578 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within AL, ordered by federal enforcement volume:
- ADVANCED TECHNICAL FINISHING, LLCHUNTSVILLE — 3 federal enforcement records
- NUTEC METAL FINISHING, LLCBIRMINGHAM — 2 federal enforcement records
- TECHTRIX, INC.GADSDEN — 2 federal enforcement records
- AEROSTAR, L.L.C.HUNTSVILLE — 1 federal enforcement record
- MOTHERSON ELECTROPLATING US LLCNORTHPORT — 1 federal enforcement record
- PRECISION METAL FINISHING, INC.MOBILE — 1 federal enforcement record
- GEORGIA PLATING TECHNOLOGY, LLCLANETT — 1 federal enforcement record
- ALABAMA PLATING CORPORATIONEIGHT MILE — 1 federal enforcement record
- DSI, L.L.C.MOBILE — 1 federal enforcement record
- ALABAMA PLATING TECHNOLOGY, LLCLANETT — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in ALState-wide enforcement data
- Electroplating, Plating, Polishing, in ALIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ACCURATE MACHINE & TOOL CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ACCURATE MACHINE & TOOL CORPORATION's OSHA violation history?
- ACCURATE MACHINE & TOOL CORPORATION has 1 OSHA inspection on record with 7 violations and $5,577.6 in total penalties.
- How does ACCURATE MACHINE & TOOL CORPORATION's safety record compare to its industry?
- ACCURATE MACHINE & TOOL CORPORATION operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.