Establishment profile
A. & M. TOOL & DIE COMPANY, INC.
64 MILL ST, SOUTHBRIDGE, MA, 01550
Operated by A&M Tool & Design
423830 — Industrial Machinery and Equipment Merchant Wholesalers
EIN 042091802
Summary
A. & M. TOOL & DIE COMPANY, INC. has accumulated 12 OSHA violations across 3 inspections over 39 years of recorded history, with $13,840 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 44 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
A. & M. TOOL & DIE COMPANY, INC. appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 4238 within MA. Peer group: 44 employers. This establishment has 12 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 47 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Dec 2017
Most frequent event: Compressed or pinched by shifting objects or equipment
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Dec 1, 2017 | Compressed or pinched by shifting objects or equipment | Fingertip(s) | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Dec 1, 2017 | Amputated,Crushed,Finger,Hoistline | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for A. & M. TOOL & DIE COMPANY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for A. & M. TOOL & DIE COMPANY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for A. & M. TOOL & DIE COMPANY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for A. & M. TOOL & DIE COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for A. & M. TOOL & DIE COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-12-06 | Referral | 2 | 2 | $6,340 | |
| 2010-06-23 | Planned | 8 | 3 | $6,500 | |
| 1986-12-03 | Planned | 2 | — | $1,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
A. & M. TOOL & DIE COMPANY, INC. is one of 1 establishments rolled up under the parent organization A&M Tool & Design.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of A&M Tool & Design across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in industrial machinery and equipment merchant wholesalers within MA, ordered by federal enforcement volume:
- FRED V. FOWLER CO., INC.NEWTON — 1 federal enforcement record
- MAYBURY MATERIAL HANDLING CO.EAST LONGMEADOW — 1 federal enforcement record
- FIBA TECHNOLOGIES, INC.MILLBURY — 1 federal enforcement record
- CROWN EQUIPMENT CORP. DBA CROWN LIFT TRUCKSWOBURN — 1 federal enforcement record
- BROOMFIELD LABORATORIES, INC.BOLTON — 1 federal enforcement record
- NORTHLAND INDUSTRIAL TRUCK CO., INC.WILMINGTON — 1 federal enforcement record
- FOLEY INC. DBA FOLEY MARINE & INDUSTRIAL ENGINESWORCESTER — 1 federal enforcement record
- CROWN EQUIPMENT CORPORATIONWOBURN — 1 federal enforcement record
- MAERKISCHES WERK OF NORTH AMERICASOUTHBORO — 1 federal enforcement record
- AIR INCORPORATEDFRANKLIN — 0 federal enforcement records
Related searches
- All A&M Tool & Design locationsParent rollup
- Industrial Machinery and Equipment Merchant WholesalersAll employers in this industry
- Employers in MAState-wide enforcement data
- Industrial Machinery and in MAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on A. & M. TOOL & DIE COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup A&M Tool & Design.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is A. & M. TOOL & DIE COMPANY, INC.'s OSHA violation history?
- A. & M. TOOL & DIE COMPANY, INC. has 3 OSHA inspections on record with 12 violations and $13,840 in total penalties.
- How does A. & M. TOOL & DIE COMPANY, INC.'s safety record compare to its industry?
- A. & M. TOOL & DIE COMPANY, INC. operates in the industrial machinery and equipment merchant wholesalers industry. The industry average Total Recordable Incident Rate (TRIR) is 1.5. A. & M. TOOL & DIE COMPANY, INC.'s self-reported DART rate is 18.31 compared to an industry average of 0.9.