Establishment profile
YANKE MACHINE SHOP, INC.
4414 SOUTH GEKELER, BOISE, ID, 83716
332710 — Machine Shops
EIN 820187585
Summary
YANKE MACHINE SHOP, INC. has accumulated 7 OSHA violations across 1 inspection over 6 years of recorded history, with $16,824 in total assessed penalties.
The establishment sits in the 62nd percentile for violations within its industry-state peer group of 22 employers. The most recent enforcement activity was recorded 6 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
YANKE MACHINE SHOP, INC. appears in OSHA workplace safety, MSHA mine safety, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3327 within ID. Peer group: 22 employers. This establishment has 7 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 66 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for YANKE MACHINE SHOP, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for YANKE MACHINE SHOP, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
Company-level in ID — for YANKE MACHINE SHOP, INC., not this location alone
Mine Safety & Health Administration — citations issued at mining operations. MSHA records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other YANKE MACHINE SHOP, INC. operations in the same state.
MSHA citations
Mine Safety and Health Administration citations. S&S (significant and substantial) marks violations that could reasonably contribute to a serious injury. Negligence rating is MSHA’s operator-culpability assessment (none, low, moderate, high, or reckless disregard). Proposed = assessed at issuance; Paid = post-settlement / appeal. 2 citations · 1S&S · 2 contractor · $492 proposed / $492 paid.
| Citation | Mine | Date | Section | S&S | Negligence | Proposed | Paid |
|---|---|---|---|---|---|---|---|
| 8558146 | Golden Eagle Ada, ID contractor: Yanke Machine Shop | Apr 2010 | — | Yes | ModNegligence | $392 | $392 |
| 8558473 | Golden Eagle Ada, ID contractor: Yanke Machine Shop | Feb 2010 | — | No | ModNegligence | $100 | $100 |
Source: MSHA citation database. “Contractor” annotations indicate the cited party was on-site at the mine but not the mine’s operator -- responsibility attaches to the contractor LLC, not the mine’s owner. Section codes reference 30 CFR (the Mine Safety and Health regulations).
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for YANKE MACHINE SHOP, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for YANKE MACHINE SHOP, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for YANKE MACHINE SHOP, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for YANKE MACHINE SHOP, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseVBS MESH PANEL 1 - 7contract · Last action 2021-03-05$131,040
- Department of DefenseFISH BARRIER SCREENS FOR LGA (40 PANELS TOTAL)contract · Last action 2021-07-27$109,200
- Department of DefensePANEL, MESH, VBS, COMPLETEcontract · Last action 2018-08-01$103,680
- Department of DefenseVERTICAL BARRIER SCREEN (VBS) PARTS MESH PANELcontract · Last action 2011-12-08$89,583
- Department of DefenseVERTICAL BARRIER SCREEN MESH PANELcontract · Last action 2010-09-09$79,141
- Department of DefenseVBS MESH PANEL 1 - 7contract · Last action 2022-05-04$78,690
- Department of DefensePANEL, MESH, VERTICAL BARRIER SCREENcontract · Last action 2018-11-26$77,760
- Department of DefenseLGA - SCREEN, VBS, PANELScontract · Last action 2018-02-05$77,282
- Department of DefenseVERTICAL BARRIER SCREENS MESH PANELS AND TAPEcontract · Last action 2009-10-23$76,981
- Department of DefenseVERTICAL BARRIER SCREEN MESH PANELS AT MCNARY DAM.contract · Last action 2013-03-25$70,065
- Department of DefenseVBS MESH PANELS 1-7contract · Last action 2018-06-19$64,680
- Department of Defense54 PANEL, MESH, VERTICAL BARRIER SCREENS FOR MCNARY LOCK AND DAM.contract · Last action 2015-10-29$49,140
- Department of DefenseMESH PANEL FOR VERTICAL BARRIER SCREENScontract · Last action 2013-11-19$49,046
- Department of DefenseVERTICAL BARRIER SCREEN (VBS) MESH PANELcontract · Last action 2017-08-02$34,645
- Department of the InteriorSERVICE GATE DRIVE NUTScontract · Last action 2013-09-12$34,008
- Department of the InteriorBLACK CANYON HYDROPUMP RUNNER REPAIRcontract · Last action 2021-03-12$33,645
- Department of the InteriorIGF::OT::IGF; CRFWCO WA: INSTALL LAMPREY STRUCTUREcontract · Last action 2017-03-27$26,059
- Department of the InteriorHYDROPUMP RUNNER REPAIR, SNAKE RIVER AREA OFFICE, BLACK CANYON POWERPLANT, EMMETT, IDAHOcontract · Last action 2019-11-06$23,959
- Department of the InteriorLAMPREY PASSAGE SYSTEM FABRICATIONcontract · Last action 2016-03-10$23,475
- Department of the InteriorSEWA SEED BAGGER HOPPER DESIGN & BUILDcontract · Last action 2010-09-20$20,973
- Department of AgricultureIGF::CL::IGF 27 PICNIC TABLE BASEScontract · Last action 2016-09-25$16,455
- Department of the InteriorIGF::OT::IGF OTHER FUNCTIONS : OT BLACK CANYON HYDROPUMP #2 SHAFT REPAIR CHECK MAIN SHAFT FOR STRAIGHTNESS AND CORRECT AS NECESSARY. REPAIR UPPER GUIDE BEARING JOURNAL AND SHAFT FIT AS NECESSARY. ASSESS CONDITION OF STAINLESS STEEL PACKING SLEEVES AND REPAIR OR REPLACE AS NECESSARY.contract · Last action 2012-09-13$15,200
- Department of the InteriorIGF::OT::IGF PURCHASE OF STEEL MATERIALcontract · Last action 2013-06-19$11,260
- Department of the InteriorIGF::CT::IGF CRITICAL FUNCTIONS : CT GUIDE BUSHING AND LINK PIN REPAIR OF CLAMSHELL GATES 1-8 AT ARROWROCK DAM -contract · Last action 2012-12-04$10,932
- Department of the InteriorIGF::OT::IGF BLACK CAN. DRUM GATE INTAKE GATE FRAMEScontract · Last action 2015-08-14$9,936
- Department of AgricultureDRIVE SHAFT MANUFACTURING FOR MAFFS UNITScontract · Last action 2012-08-01$8,659
- Department of DefenseGENERATOR ENCLOSURE/CAGEcontract · Last action 2014-09-18$7,671
- Department of the InteriorSTEEL CUT TO SIZEcontract · Last action 2015-09-18$7,642
- Department of the InteriorREPAIR CAVIATION AND EROSION DAMAGE ON BRONZE TURBINE RUNNER FROM HYDROPUMP #1. RUNNER IS APPROXIMATELY 32 INCHES DIAMETER, 15 INCHES TALL, 625 LBS., BRONZE ALLOY WITH 16 BUCKETS. REPAIR SHALL CONSIST OF REPAIRING CAVITATION AND EROSION DAMAGE, BUILDING UP BUCKETS BY OVERLAY WELDING WITH SILICONE BRONZE WIRE, SHAPING BUCKETS BY GRINDING AND DYNAMICALLY SPIN BALANCING THE RUNNER. ADEQUATE SURFACE PREPARATION SHALL BE PERFORMED TO REMOVE SCALE AND CORROSION PRODUCTS BEFORE REPAIRS.contract · Last action 2010-03-05$7,510
- Department of the InteriorIGF::OT::IGF BPA MACHINE AND WELDING SERVICEScontract · Last action 2013-06-05$5,000
- Department of the InteriorIGF::OT::IGF: BLACK CANYON HYDROPUMP #2 IMPELLOR EMERGENCY REPAIR CONSISTING OF THE FOLLOWING: 1.MACHINE THE I.D. (INSIDE DIAMETER) OF THE IMPELLOR-SHAFT BORE TO PROVIDE GOOD BASE METAL FOR WELD REPAIR. 2.PERFORM I.D. BORE WELD OVERLAY TO PROVIDE MATERIAL FOR FINAL MACHINING FOR A CORRECT FIT WITH THE MATING SHAFT O.D. 3.AFTER OVERLAY WELDING, MACHINE THE SURFACE FOR THE CORRECT FIT WITH THE MATING SHAFT O.D. THE ATTACHED WAGE DETERMINATION NO. 2005-2159, REVISION NO. 13, DATED 6/13/2012, MAY FORM A PART OF ANY CONTRACT ARISING FROM THIS SOLICITATION.contract · Last action 2013-01-29$4,500
- Department of the InteriorBLACK CANYON SHEET METAL PAN REPLACEMENTcontract · Last action 2015-07-30$3,625
- Department of the InteriorIGF::OT::IGF - CLAMSHELL GATE WELD REPAIRcontract · Last action 2013-02-28$3,320
- Department of the InteriorIGF::CL::IGF CLOSELY ASSOCIATED-REFURBISH BLACK CANYON HYDROPUMP UPPER GUIDE BEARING AND REFURBISH 9 INCH TURBINE GUIDE BEARINGcontract · Last action 2013-04-15$2,696
- Department of Veterans AffairsANGLE IRON, 2" X 3" X 60"LONG, 1/4" MATERIAL, STEEcontract · Last action 2008-04-09$73
- Department of Veterans Affairs5/8" KEYED SHAFT,contract · Last action 2008-02-12$71
Federal contract dollars to this establishment. Primary NAICS: 333999 - ALL OTHER MISCELLANEOUS GENERAL PURPOSE MACHINERY MANUFACTURING. Last action: 2022-05-04. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-08-02 | Planned | 7 | 7 | $16,824 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within ID, ordered by federal enforcement volume:
- YANKE MACHINE SHOP, INC.BOISE — 2 federal enforcement records
- BEAR MOUNTAIN MACHINE, LLCNEW PLYMOUTH — 2 federal enforcement records
- YANKE MACHINE SHOP, INC.MERIDIAN — 2 federal enforcement records
- ENVIRO-TECH INDUSTRIES, LLCBOISE — 1 federal enforcement record
- SPACE SCREW INCRATHDRUM — 1 federal enforcement record
- QUALITY MACHINE PRODUCTS, INC.CALDWELL — 1 federal enforcement record
- STARTING LINE PRODUCTS, INC.IDAHO FALLS — 1 federal enforcement record
- INTERMOUNTAIN FABRICATION L.L.C.JEROME — 1 federal enforcement record
- L & M ENTERPRISES, LLCJEROME — 1 federal enforcement record
- G & L METAL FAB INCAMERICAN FALLS — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in IDState-wide enforcement data
- Machine Shops in IDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on YANKE MACHINE SHOP, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is YANKE MACHINE SHOP, INC.'s OSHA violation history?
- YANKE MACHINE SHOP, INC. has 1 OSHA inspection on record with 7 violations and $16,824 in total penalties.
- How does YANKE MACHINE SHOP, INC.'s safety record compare to its industry?
- YANKE MACHINE SHOP, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. YANKE MACHINE SHOP, INC.'s self-reported DART rate is 1.51 compared to an industry average of 1.5.