Skip to main content

Establishment profile

WILLIAMS METAL FINISHING, INCORPORATED

870 COMMERCE STREET, SINKING SPRING, PA, 19608
332813Electroplating, Plating, Polishing, Anodizing, and Coloring

Download as PDF →

OSHA inspections
7
over 39 years
Violations
12
$2,550 in penalties
Penalties
$2,550
$213 avg
Accident investigations on record
3 National Emphasis Program inspections

Summary

WILLIAMS METAL FINISHING, INCORPORATED has accumulated 12 OSHA violations across 7 inspections over 39 years of recorded history, with $2,550 in total assessed penalties.

The establishment sits in the 74th percentile for violations within its industry-state peer group of 283 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 14 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

WILLIAMS METAL FINISHING, INCORPORATED appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
7
0.2 / yr · last 39 yrs
Violations
12
0.3 / yr
Penalties
$2,550
$213 avg / violation
75% serious25% other
Inspection trigger · planned
5 of 7
Inspection trigger · complaint
1 of 7

43% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 12 citations in this view · $2,550 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A0111$400Nov 1995Nov 1995
5A000111$350Dec 2005Dec 2005
29 CFR 1910.0147 C04 I11$350Dec 2005Dec 2005
29 CFR 1910.0157 G0311$350Dec 2005Dec 2005
29 CFR 1910.0307 B11$350Dec 2005Dec 2005
29 CFR 1910.0022 A0111$350Dec 2005Dec 2005
29 CFR 1910.0134 A0211$200Jun 2006Jun 2006
29 CFR 1910.1000 E11$200Jun 2006Jun 2006
29 CFR 1910.1000 B0211Jun 2006Jun 2006
29 CFR 1910.0107 B05 I11Nov 1995Nov 1995
29 CFR 1910.0303 G01 II11Nov 1995Nov 1995
29 CFR 1910.0178 P0111Nov 1995Nov 1995

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

74th

Above average violations in NAICS 3328 within PA. Peer group: 283 employers. This establishment has 12 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
59th
peer median: $1,325
Inspection frequency
91st
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
2.3
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Complaint
1
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
14 years ago

No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WILLIAMS METAL FINISHING, INCORPORATED. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2011-10-13Planned0$0
2006-05-18Complaint33$400
2005-11-30Referral0$0
2005-06-21Planned55$1,750
2004-08-25Planned0$0
1995-10-18Planned41$400
1987-04-28Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in electroplating, plating, polishing, anodizing, and coloring within PA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on WILLIAMS METAL FINISHING, INCORPORATED from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is WILLIAMS METAL FINISHING, INCORPORATED's OSHA violation history?
WILLIAMS METAL FINISHING, INCORPORATED has 7 OSHA inspections on record with 12 violations and $2,550 in total penalties.
How does WILLIAMS METAL FINISHING, INCORPORATED's safety record compare to its industry?
WILLIAMS METAL FINISHING, INCORPORATED operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.