Summary
UNIVERSAL PULTRUSIONS has no OSHA inspection history on file. Federal records covering wage, environmental, labor relations, and other agencies are noted below where present.
The most recent federal enforcement activity was recorded 0 days ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNIVERSAL PULTRUSIONS appears in UVA Corporate Prosecution Registry record only. No matching records were found in OSHA workplace safety, WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
No OSHA inspections, citations, or accidents on file for UNIVERSAL PULTRUSIONS. Verify directly with Occupational Safety and Health Administration →
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNIVERSAL PULTRUSIONS. Verify directly with OSHA Injury Tracking Application →
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNIVERSAL PULTRUSIONS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 0 days ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNIVERSAL PULTRUSIONS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNIVERSAL PULTRUSIONS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNIVERSAL PULTRUSIONS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNIVERSAL PULTRUSIONS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNIVERSAL PULTRUSIONS. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
UNIVERSAL PULTRUSIONS, LLC 212 W FAIR ST · MARSHALL, AR, 72650 | Water | — | 0 | 0 | — | May 2017 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
Independent monitor required. First case: 2010-08-01. Most recent: 2011-05-24. Source: UVA Corporate Prosecution Registry — federal pleas, DPAs, and NPAs.
Federal contracts
This location
- Department of the InteriorPARTITIONS FOR PULLTITE RESTROOMcontract · Last action 2008-04-30$16,500
- Department of the InteriorFIBERGLASS DOORScontract · Last action 2008-08-18$9,487
- Department of the InteriorDOORScontract · Last action 2008-07-15$7,823
- Department of the InteriorDOORS, BATHROOMcontract · Last action 2008-08-25$5,660
- Department of Statecontract · Last action 2008-08-01$5,223
- General Services AdministrationTAS::17 1804::TAS CLEANER, VACUUM, ELECTRIC. SHALL BE 3M MODEL NU MBER 497AJM, ID 78-9236-5057-0 OR EQUAL. AWARDED IAW GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 CLEANER, VACUUM, ELECTRIC: SHALL BE 3M MODEL NUMBER 497AJM-R, ID NO. 80-6103-7375-7, OR EQUAL, WITH THE FOLLOWING CHARACTERISTICS: THIS PORTABLE UNIT IS TYPICALLY USED FOR HIGH EFFICIENCY CLEANUP OF ELECTRONIC OFFICE EQUIPMENT SUCH AS COPY MACHINES. SHALL BE IN ACCORDANCE WITH THE FOLLOWING REQUIREMENTS: VOLTAGE - 115 VAC, 50/60 HZ FILTER - 3M, TYPE 2 AMPERAGE - 5.0 AMPS MOTOR - 1.0 HP VACUUM TOOL CASE DIMENSIONS: LENGTH - 18-1/4 INCHES WIDTH - 14-1/4 INCHES HEIGHT - 9-5/8 INCHES TABLE 1: ACCESSORIES TO BE FURNISHED WITH VACUUM QUANTITY DESCRIPTION OF ACCESSORY 1 EACH TYPE 2 FILTER 1 EACH DETACHABLE POWER CORD 1 EACH 32 INCH STRETCH HOSE 1 EACH CREVICE BRUSH & NOZZLE 1 EACH DUSTING BRUSH 1 EACH NEEDLE NOSE NOZZLE 1 EACH CURVED WAND NOZZLE 1 EACH STORAGE CASE W/2 CLOSURE LATCHES MOTOR: THE CONTINUOUS DUTY RATED MOTOR, SWITCHES AND ALL ASSOCIATED CONTROLS SHALL BE DESIGNED TO OPERATE FROM A 110-120 VAC, 50/60 HZ, SINGLE PHASE POWER SUPPLY. THE MOTOR SHALL HAVE AN INTERNAL THERMAL BREAKER THAT OPENS AT 221 DEGREES F, TO PREVENT OVERHEATING. THE VACUUM SHALL BE UL LISTED OR SHALL BE CERTIFIED BY A TESTING LABORATORY ACCEPTABLE TO THE GOVERNMENT, AS CONFORMING TO UL 1017, " VACUUM CLEANERS, BLOWER CLEANERS, AND HOUSEHOLD FLOOR FINISHING MACHINES , STANDARD FOR SAFETY. POWER CORD: SHALL BE DESIGNED WITH AN EQUIPMENT GROUNDING CONDUCTOR AND GROUNDING PLUG(S). SHALL INCORPORATE ONE HOODED END FEMALE RECEPTACLE, ON THE END WHICH DIRECTLY PLUGS INTO THE SIDE OF THE TOOL CASE. THE OTHER END OF THE POWER CORD SHALL BE A STANDARD THREE-WAY, 115 VAC, MALE PLUG. VACUUM TOOL CASE: THE PORTABLE VACUUM CLEANER IS DESIGNED AND SHALL BE PERMANENTLY MOUNTED IN A HIGH IMPACT, PLASTIC OR EQUIVALENT STORAGE CASE. THE INSIDE COVER OF THE CASE SHALL HAVE AN ACCESSORY DOOR, WITH FASTENER(S), TO STORE ALL ACCESSORIES, POWER CORD, SPECIFIED IN TABLE 1. THE STORAGE CASE WILL HAVE TWO (2) STURDY RELEASE LATCHES MOUNTED ON THE COVER/LID AND A CARRYING HANDLE. THE HANDLE SHALL BE PERMANENTLY ATTACHED TO THE CASE. THE COMPLETE VACUUM AND TOOL CASE ASSEMBLY, WITH ALL ACCESSORIES STORED AND ENCLOSED, SHALL WITHSTAND A TOTAL CARRYING CAPACITY OF A MINIMUM OF 17 POUNDS. ONE END OF THE CASE SHALL INCORPORATE VACUUM INLET AND EXHAUST PORTS PORT ONE INTEGRAL POWER SWITCH, A DETACHABLE POWER CORD RECEPTACLE THAT PLUGS INTO THE CASE. THE INLET PORT SHALL BE A COMPATIBLE SIZE WITH THE HOSE AND ATTACHMENTS. A VACUUM INLET PLUG SHALL BE FURNISHED TO PREVENT FOREIGN OBJECTS FROM ENTERING THE VACUUM PORT, WHEN UNIT IS NOT IN USE. SHALL BE DESIGNED WITH A HIGH QUALITY FILTRATION SYSTEM, THAT INCORPORATES A PLASTIC TYPE, TONER COLLECTION CANISTER, WHICH FITS DIRECTLY IN THE TOOL CASE, TO ELIMINATE ANY TONER BLOW-BY AND POSSIBLE HEALTH HAZARD. TOOLS: THE TOOLS SHALL BE CONSTRUCTED OF MATERIALS THAT ELIMINATE ELECTRICAL OR STATIC DISCHARGE. THE TOOLS SHALL BE DESIGNED TO PREVENT COMPONENT DAMAGE AND ANY POTENTIAL DANGER OF CONTACT. INSTALLATION AND OPERATING INSTRUCTIONS: THE VACUUM SHALL INCLUDE TOOL CASE INSTRUCTIONS, VACUUM OPERATING INSTRUCTIONS/MANUAL AND A REPLACEMENT PARTS LISTING FOR EACH UNIT. WORKMANSHIP: THE VACUUM CLEANER, TOOL CASE, POWER CORD AND ALL ACCESSORIES SHALL NOT CONTAIN ANY DEFECTS THAT WILL AFFECT FIT, FORM, FUNCTIONAL OR OPERATIONAL REQUIREMENTS. THERE SHALL BE NO DEFECTS THAT WILL CREATE A SAFETY OR HAZARDOUS CONDITION TO PERSONAL OR EQUIPMENT. IMAGE IS REPRESENTATIONAL AND INTENDED ONLY AS A GUIDE. UNIT OF ISSUE: THE UNIT OF ISSUE SHALL BE EA (ONE COMPLETE SYSTEM IN A PACKAGE). PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PRcontract · Last action 2009-02-12$189
- General Services AdministrationFEDERAL SUPPLY SCHEDULE CONTRACT.contract · Last action 2009-02-20$0
Federal contract dollars to this establishment. Primary NAICS: 326122 - PLASTICS PIPE AND PIPE FITTING MANUFACTURING. Last action: 2009-02-20. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
In the news
Related searches
- Employers in ARState-wide enforcement data
About this data
This profile aggregates federal enforcement records on UNIVERSAL PULTRUSIONS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNIVERSAL PULTRUSIONS's OSHA violation history?
- UNIVERSAL PULTRUSIONS has no OSHA inspections on record.