Establishment profile
UNIFIED DESIGNS AND MANUFACTURING
147 AIRPARK INDUSTRIAL DRIVE, ALABASTER, AL, 35007
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
Summary
UNIFIED DESIGNS AND MANUFACTURING has accumulated 15 OSHA violations across 3 inspections over 14 years of recorded history, with $11,050 in total assessed penalties.
The establishment sits in the 78th percentile for violations within its industry-state peer group of 167 employers. Inspection frequency runs at the 76th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNIFIED DESIGNS AND MANUFACTURING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 15 citations in this view · $11,050 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0095 G01 | 1 | 1 | $2,100 | Sep 2012 | Sep 2012 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,100 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0303 B07 IV | 1 | 1 | $2,100 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $1,400 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0179 G01 IV | 1 | 1 | $1,400 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $900 | Feb 2012 | Feb 2012 |
| 29 CFR 1904.0007 B03 | 1 | 1 | $350 | Nov 2011 | Nov 2011 |
| 29 CFR 1904.0032 B04 | 1 | 1 | $350 | Nov 2011 | Nov 2011 |
| 29 CFR 1904.0007 B04 | 1 | 1 | $350 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Feb 2012 | Feb 2012 |
| 29 CFR 1910.0134 C01 | 1 | 1 | — | Feb 2012 | Feb 2012 |
| 29 CFR 1910.0212 A05 | 1 | 1 | — | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0107 G07 | 1 | 1 | — | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0106 D07 IA | 1 | 1 | — | Nov 2011 | Nov 2011 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3329 within AL. Peer group: 167 employers. This establishment has 15 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for UNIFIED DESIGNS AND MANUFACTURING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-09-12 | Follow-up | 1 | 1 | $2,100 | |
| 2011-10-20 | Referral | 3 | 1 | $900 | |
| 2011-10-13 | Complaint | 11 | 4 | $8,050 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous fabricated metal product manufacturing within AL, ordered by federal enforcement volume:
- BARRON FAN TECHNOLOGY, INC.ALABASTER — 3 federal enforcement records
- WILLO PRODUCTS COMPANY, INC.DECATUR — 2 federal enforcement records
- WARRIOR RIVER STEEL, LLCCORDOVA — 2 federal enforcement records
- Industry Services Co., Inc.THEODORE — 2 federal enforcement records
- VAE NORTRAK, INC.BIRMINGHAM — 2 federal enforcement records
- SEALS WELDING AND FABRICATING, INC.OXFORD — 2 federal enforcement records
- THE KENT CORPORATIONBIRMINGHAM — 2 federal enforcement records
- GREDE II, LLCBREWTON — 2 federal enforcement records
- OXFORD MANUFACTURING COMPANY, INC.SELMA — 2 federal enforcement records
- C & C FABRICATION LLCLANETT — 2 federal enforcement records
Related searches
- All Other Miscellaneous Fabricated Metal Product ManufacturingAll employers in this industry
- Employers in ALState-wide enforcement data
- All Other Miscellaneous in ALIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNIFIED DESIGNS AND MANUFACTURING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNIFIED DESIGNS AND MANUFACTURING's OSHA violation history?
- UNIFIED DESIGNS AND MANUFACTURING has 3 OSHA inspections on record with 15 violations and $11,050 in total penalties.
- How does UNIFIED DESIGNS AND MANUFACTURING's safety record compare to its industry?
- UNIFIED DESIGNS AND MANUFACTURING operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6.