Skip to main content
FastDOL

Establishment profile

TOOL-SMITH CO., INC.

1300 4TH AVE SOUTH, BIRMINGHAM, AL, 35233

Download as PDF →

OSHA inspections
1
over 33 years
Violations
6
$4,500 in penalties
Penalties
$4,500
$750 avg

Summary

TOOL-SMITH CO., INC. has accumulated 6 OSHA violations across 1 inspection over 33 years of recorded history, with $4,500 in total assessed penalties.

The establishment sits in the 77th percentile for violations within its industry-state peer group of 27,143 employers. The most recent enforcement activity was recorded 33 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TOOL-SMITH CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
1
0.0 / yr · last 33 yrs
Violations
6
0.2 / yr
Penalties
$4,500
$750 avg / violation
67% serious33% other
Inspection trigger · complaint
1 of 1

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view · $4,500 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0022 D0111$1,100Apr 1993Apr 1993
29 CFR 1910.1200 E0111$800Apr 1993Apr 1993
29 CFR 1910.1200 G0111$800Apr 1993Apr 1993
29 CFR 1910.1200 H11$800Apr 1993Apr 1993
29 CFR 1903.0002 A0111$500Apr 1993Apr 1993
29 CFR 1904.0002 A11$500Apr 1993Apr 1993

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

77th

Above average violations. Peer group: 27,143 employers. This establishment has 6 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
97th
peer median: $0
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for TOOL-SMITH CO., INC.. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TOOL-SMITH CO., INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
33 years ago

No federal enforcement activity has been recorded against this establishment in 33+ years. Most recent activity: 33 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TOOL-SMITH CO., INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for TOOL-SMITH CO., INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TOOL-SMITH CO., INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TOOL-SMITH CO., INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TOOL-SMITH CO., INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TOOL-SMITH CO., INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$1.7M
Obligated (all-time)
$3.9M
Awards
66
Top agency
Department of Defense
$3.7M
Top agencies by obligation (this location)
Department of Defense$3.7M
Department of Homeland Security$147K
General Services Administration$17K
Largest awards (top 50 of 66)
  • Department of Defense
    DIRECT CURRENT TORQUE TOOLS & EQUIPMENT
    contract · Last action 2025-01-14
    $1,409,400
  • Department of Defense
    ELECTRIC TORQUE TOOL SYSTEMS
    contract · Last action 2008-06-07
    $890,485
  • Department of Defense
    DECK WINCH
    contract · Last action 2009-06-15
    $336,563
  • Department of Homeland Security
    WINCH, DRUM, HU
    contract · Last action 2014-09-09
    $97,930
  • Department of Defense
    PREV MAINT, CALIBRATION
    contract · Last action 2014-07-28
    $89,225
  • Department of Defense
    M-1 HYDRAULIC TEST AND FLUSH SYSTEM
    contract · Last action 2023-04-19
    $80,905
  • Department of Defense
    ENERPAC FOUR POINT LIFTING SYSTEM
    contract · Last action 2014-04-09
    $78,658
  • Department of Defense
    ENERPAC FOUR POINT LIFTING SYSTEM
    contract · Last action 2011-08-31
    $78,063
  • Department of Defense
    PREVENTATIVE MAINTENANCE AND CALIBRATION
    contract · Last action 2020-01-22
    $64,213
  • Department of Homeland Security
    3950-01-384-4758, WINCH, DRUM, POWER OPERATED, MFR: INGERSOLL RAND COMPANY ATHENS PLANT, PART NUMBER HU40. 8 EACH
    contract · Last action 2009-07-30
    $49,371
  • Department of Defense
    PREVENTATIVE MAINTENANCE AND CALIBRATION WITH 4 YEAR OPTIONS
    contract · Last action 2025-04-22
    $46,718
  • Department of Defense
    3 TON BRIDGE CRANE -
    contract · Last action 2011-06-28
    $34,400
  • Department of Defense
    WORKSTATION BRIDGE CRANE
    contract · Last action 2011-05-24
    $34,327
  • Department of Defense
    TORQUE TOOLS = 1 EXPERT CONTROLLER, 1 BATTERY PISTOL TOOLS TO INCLUDE BATTERY AND CHARGER, 1 RIGHT ANGLE BATTERY TOOL.
    contract · Last action 2019-10-08
    $24,915
  • Department of Defense
    PREVENTATIVE MAINTENANCE/CALIBRATION AND EMERGENCY REPAIR OF DC TORQUE TOOLS LOCATED AT ANNISTON ARMY DEPOT, ANNISTON, ALABAMA.
    contract · Last action 2026-01-07
    $24,800
  • Department of Defense
    WORK STATION
    contract · Last action 2024-04-29
    $23,584
  • Department of Defense
    BORE CLEANING KIT (GUN BARREL CLEANING EQUIPMENT)
    contract · Last action 2022-06-30
    $23,477
  • Department of Defense
    LONG LEAD PARTS FOR PRESS
    contract · Last action 2024-05-06
    $21,965
  • Department of Defense
    CENTERS
    contract · Last action 2023-06-12
    $21,101
  • Department of Defense
    BUDGIT ELECTRIC CHAIN CRANE HOIST
    contract · Last action 2016-02-19
    $20,734
  • Department of Defense
    HUCK POWER UNIT
    contract · Last action 2025-11-26
    $20,256
  • Department of Defense
    IMPACT WRENCH, IMPACT TOOL, ANGLE GRINDER
    contract · Last action 2012-11-21
    $20,236
  • Department of Defense
    COOLING FANS
    contract · Last action 2025-01-22
    $20,025
  • Department of Defense
    HAR TRC3000P-15 AIR HOIST 3 TON 15-FOOT
    contract · Last action 2009-02-02
    $16,897
  • Department of Defense
    4512186312!SAW,CHAIN
    contract · Last action 2009-10-07
    $16,625
  • Department of Defense
    DPE-GEARBOX EQUIPMENT
    contract · Last action 2020-08-13
    $16,450
  • Department of Defense
    HOIST FOR PAINT BOOTH
    contract · Last action 2019-02-27
    $15,207
  • Department of Defense
    U438260 STANLEY HYDRAULIC TOOLS
    contract · Last action 2011-11-21
    $15,153
  • Department of Defense
    HAND TOOLS
    contract · Last action 2012-04-24
    $14,740
  • Department of Defense
    1 TON BUDGIT CHAIN HOIST
    contract · Last action 2018-06-05
    $14,086
  • General Services Administration
    WRENCH, IMPACT, HYDRAULIC: WRENCH, IMPACT, HYDRA ULIC OVERALL LENGTH: 17.500 IN. L HANDLE TYPE: D -STYLE TORQUE CAPACITY: 500.0 FOOT-POUNDS MINIMU M AND 2500.0 FOOT-POUNDS MAX DRIVE SURFACE SZ: 1 .000 IN. L DRIVE END TYPE: MALE SPINDLE DRIVE FO R WHICH DESIGNED: STRAIGHT DRIVE END SHAPE: SQUARE SPECIAL FEATURES: SIDE ASSIST HANDLE; 7 TO 12 GPM INPUT FLOW RANGE; 1500 TO 2000 PSI INPUT PR ESSURE; 26 LBS WEIGHT (PARTIAL DESCRIPTION)
    contract · Last action 2009-10-27
    $13,807
  • Department of Defense
    PNUEMATIC TORQUE WRENCH
    contract · Last action 2017-11-16
    $13,663
  • Department of Defense
    1 EA WINCH TUGGER, EU-501, INGERSALL RAN
    contract · Last action 2008-09-08
    $12,267
  • Department of Defense
    70 TON STEEL MATJACK HIGH PRESSURE AIR LIFTING BAGS (AIR BAG ONLY)- INFLATABLE JACKS
    contract · Last action 2022-12-05
    $12,250
  • Department of Defense
    ELECTRIC PALLET JACKS
    contract · Last action 2024-11-20
    $12,100
  • Department of Defense
    HYD. PRESS & ULTRASONIC WASHERS
    contract · Last action 2025-06-11
    $12,099
  • Department of Defense
    TOOLS
    contract · Last action 2011-10-20
    $11,157
  • Department of Defense
    PCMS ORDER FOR VARIOUS DRILL TOOLS
    contract · Last action 2011-04-18
    $10,632
  • Department of Defense
    ENERPAC PUMP
    contract · Last action 2012-11-16
    $10,032
  • Department of Defense
    1/4 TON HOIST
    contract · Last action 2016-02-02
    $10,015
  • Department of Defense
    HAND TOOLS
    contract · Last action 2013-10-03
    $9,242
  • Department of Defense
    PCMS ORDER FOR A RIDGID PIPE THREADING MACHINE
    contract · Last action 2011-10-02
    $8,430
  • Department of Defense
    TOO CRIB PARTS FOR PRODUCTION
    contract · Last action 2012-08-31
    $7,533
  • Department of Defense
    CORDLESS BATTERIES
    contract · Last action 2014-02-28
    $7,219
  • Department of Defense
    VARIOUS POWERED HANDTOOLS
    contract · Last action 2017-08-22
    $6,423
  • Department of Defense
    BLACK FOAM&SERVICE CARTS
    contract · Last action 2012-11-29
    $5,421
  • Department of Defense
    AIR HOSE ON A REEL AND SMALL TOOLS
    contract · Last action 2014-07-22
    $5,063
  • Department of Defense
    HAND TOOLS
    contract · Last action 2012-06-25
    $5,058
  • Department of Defense
    90 DEGREE ANGLE DIE GRINDER
    contract · Last action 2012-01-06
    $4,920
  • Department of Defense
    PARTS
    contract · Last action 2012-04-09
    $4,448

Federal contract dollars to this establishment. Primary NAICS: 333517 - MACHINE TOOL MANUFACTURING. Last action: 2026-01-07. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
1993-04-02Complaint64$4,500

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on TOOL-SMITH CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is TOOL-SMITH CO., INC.'s OSHA violation history?
TOOL-SMITH CO., INC. has 1 OSHA inspection on record with 6 violations and $4,500 in total penalties.