What is THE BECHDON COMPANY, INC.'s OSHA violation history?

THE BECHDON COMPANY, INC. has 2 OSHA inspections on record with 12 violations and $1,224 in total penalties.

Establishment profile

THE BECHDON COMPANY, INC.

300 COMMERCE DRIVE, UPPER MARLBORO, MD, 20774

Download as PDF →

OSHA inspections

over 33 years

Violations

$1,224 in penalties

Penalties

$1,224

$102 avg

Summary

THE BECHDON COMPANY, INC. has accumulated 12 OSHA violations across 2 inspections over 33 years of recorded history, with $1,224 in total assessed penalties.

The establishment sits in the 93rd percentile for violations within its industry-state peer group of 38,476 employers. Inspection frequency runs at the 82nd percentile. The most recent enforcement activity was recorded 26 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

THE BECHDON COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections

0.1 / yr · last 33 yrs

Violations

0.4 / yr

Penalties

$1,224

$102 avg / violation

25% serious75% other

Inspection trigger · planned

2 of 2

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 12 citations in this view · $1,224 in penalties.

CFR section	Citations	Inspections	Total penalty	First cited	Last cited
29 CFR 1910.0242 B	1	1	$437	Sep 1993	Sep 1993
29 CFR 1910.0215 B09	1	1	$437	Sep 1993	Sep 1993
29 CFR 1910.0212 A01	1	1	$350	Sep 1993	Sep 1993
29 CFR 1910.0132 F04	1	1	—	Nov 1999	Nov 1999
29 CFR 1910.0134 C02	1	1	—	Nov 1999	Nov 1999
29 CFR 1910.1200 F05 II	1	1	—	Nov 1999	Nov 1999
29 CFR 1910.0107 B09	1	1	—	Nov 1999	Nov 1999
29 CFR 1910.0132 D02	1	1	—	Nov 1999	Nov 1999
29 CFR 1910.1200 F05 I	1	1	—	Nov 1999	Nov 1999
29 CFR 1910.0037 Q02	1	1	—	Sep 1993	Sep 1993
29 CFR 1910.0037 Q01	1	1	—	Sep 1993	Sep 1993
29 CFR 1910.0101 B	1	1	—	Sep 1993	Sep 1993

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

93rd

Worse on violations than most other employers. Peer group: 38,476 employers. This establishment has 12 OSHA violations; peer median is 1.

Fewer violationsMore violations

Penalty percentile

87th

peer median: $0

Inspection frequency

82nd

peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for THE BECHDON COMPANY, INC.. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Planned

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for THE BECHDON COMPANY, INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed

Weekly

First OSHA inspection

—

Most recent activity

26 years ago

No federal enforcement activity has been recorded against this establishment in 26+ years. Most recent activity: 26 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for THE BECHDON COMPANY, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for THE BECHDON COMPANY, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for THE BECHDON COMPANY, INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for THE BECHDON COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for THE BECHDON COMPANY, INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for THE BECHDON COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)

$401K

Obligated (all-time)

$13.4M

Awards

131

Top agency

National Aeronautics and Space Administration

$8.5M

Top agencies by obligation (this location)

National Aeronautics and Space Administration$8.5M

Smithsonian Institution$1.8M

Department of Defense$1.7M

Department of Commerce$1.3M

Largest awards (top 50 of 131)

National Aeronautics and Space Administration
COMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.
contract · Last action 2015-04-07
$2,024,972
National Aeronautics and Space Administration
COMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.
contract · Last action 2011-04-27
$1,465,873
National Aeronautics and Space Administration
COMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.
contract · Last action 2012-05-02
$1,412,929
National Aeronautics and Space Administration
IGF::OT::IGF SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.
contract · Last action 2020-04-22
$1,394,845
National Aeronautics and Space Administration
SB SET-ASIDE, 42 OFFERS.BPA VENDORS SHALL PROVIDE FABRICATION SERVICES AT VENDORS SITE&SUPPLIES TO GSFC IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS SPACE FLIGHT&NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS.
contract · Last action 2025-05-13
$667,153
Smithsonian Institution
FABRICATION OF SPECTROGRAPH SUPPORT STRUCTURE ASSEMBLY
contract · Last action 2010-09-30
$495,845
Smithsonian Institution
FABRICATION AND DELIVERY OF LENS MOUNT ASSEMBLYIES FOR BINOSPEC SPECTROGRAPH
contract · Last action 2011-04-29
$493,830
Smithsonian Institution
MACHINE SHOP
contract · Last action 2011-09-28
$469,940
Department of Defense
SLAM ER DUMMY AIR TRAINING MISSILES
contract · Last action 2009-08-03
$468,747
National Aeronautics and Space Administration
VENDOR TO SUPPLY INSPECTION REPORTS, SHOP ROUTERS, MATERIALS, DRAWINGS, FRACTURE CRITICAL HARDWARE, NDE IS REQUIRED AND VENDOR CERTIFICATE OF CONFORMANCE, MATERIAL CHEMICAL AND PHYSICAL REPORTS AND DELIVERED ITEMS.
contract · Last action 2008-09-23
$404,048
National Aeronautics and Space Administration
COMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.
contract · Last action 2009-06-30
$308,524
National Aeronautics and Space Administration
COMPREHENSIVE FABRICATION NEEDS FOR SPACEFLIGHT HARDWARE PARTS, INSTRUMENT COMPONENTS, STRUCTURES, FIXTURES, ASSEMBLY TOOLS, SPACE VEHICLE PARTS, ETC.; ASSEMBLY OF FABRICATED ITEMS AND ALL REQUIRED DOCUMENTATION. THE CONTRACTOR SHALL MANUFACTURE, ASSEMBLE, AND PREPARE DOCUMENTATION FOR SPACEFLIGHT AND NON-FLIGHT PARTS IN SUPPORT OF THE MANUFACTURING ENGINEERING GROUP AND GSFC PROJECTS. THE CONTRACTOR SHALL PROVIDE THE REQUIRED PERSONNEL, FACILITIES, AND MATERIALS, UNLESS OTHERWISE PROVIDED BY THE GOVERNMENT, TO ACCOMPLISH THE ISSUED DELIVERY ORDERS. THE CONTRACTOR SHALL PROVIDE EMERGENCY REPAIR OR MODIFICATION IN SUPPORT OF REJECTED OR DEFECTIVE CRITICAL ITEMS; THIS INCLUDES PERFORMING REPAIR OR MODIFICATION AND RETURNING TO GSFC WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. THE CONTRACTOR SHALL FACILITATE TECHNICAL INTERCHANGE MEETINGS AT THE CONTRACTOR S FABRICATION FACILITY FOR DESIGN INTERPRETATION FOR WORK IN PROGRESS AND CONTRACTOR/END-USER COLLABORATION FOR CRITICAL ITEMS WITHIN A NEGOTIATED TIME FRAME PER DELIVERY ORDER. CRITICAL ITEMS ARE DEFINED AS THOSE SPACEFLIGHT AND GROUND SUPPORT ITEMS HAVING A SIGNIFICANT IMPACT ON TEST SCHEDULES, ASSEMBLY SCHEDULES, OR SHIPPING SCHEDULES AFFECTING LAUNCH SCHEDULES. APPROXIMATELY 40% OF THE WORK TO BE PERFORMED ON THIS CONTRACT WILL BE CONSIDERED CRITICAL.
contract · Last action 2014-08-15
$304,681
Department of Commerce
MACHINE PARTS - VACUUM JACKETS
contract · Last action 2014-10-08
$147,935
Department of Defense
MACHINING MATERIAL
contract · Last action 2014-01-06
$135,525
National Aeronautics and Space Administration
VENDOR TO SUPPLY INSPECTION REPORTS, SHOP ROUTERS, MATERIALS, DRAWINGS, FRACTURE CRITICAL HARDWARE, NDE IS REQUIRED AND VENDOR CERTIFICATE OF CONFORMANCE, MATERIAL CHEMICAL AND PHYSICAL REPORTS AND DELIVERED ITEMS.
contract · Last action 2008-07-14
$132,450
Department of Commerce
MACHINE PARTS
contract · Last action 2014-05-30
$131,005
National Aeronautics and Space Administration
FABRICATION BLANKET PURCHASE AGREEMENT
contract · Last action 2009-07-14
$130,669
Department of Defense
INSULATOR RINGS
contract · Last action 2011-09-22
$126,750
Department of Commerce
MACHINING OF PARTS FOR NCNR
contract · Last action 2014-05-29
$119,975
Department of Commerce
MACHINING OF PARTS
contract · Last action 2014-05-30
$118,539
Department of Commerce
MACHINE PARTS - VACUUM
contract · Last action 2014-05-29
$116,455
Department of Commerce
MACHINING OF PARTS - VACUUM JACKETS
contract · Last action 2014-05-29
$113,680
Department of Commerce
CANDOR CRYOGENIC DETECTOR PROTOTYPE 1 PARTS
contract · Last action 2018-09-12
$100,127
Department of Defense
FABRICATED ACOUSTIC ITEMS
contract · Last action 2009-09-09
$91,024
Smithsonian Institution
BASE CART MACHINING FOR INSTRUMENT SUPPORT STRUCTURE
contract · Last action 2010-12-23
$90,700
Department of Defense
BURST DIAPHRAGMS-STAINLESS STEEL
contract · Last action 2008-02-20
$84,000
Department of Commerce
VACUUM JACKETS - MACHINING OF PARTS
contract · Last action 2014-05-30
$82,064
National Aeronautics and Space Administration
INNER HEMISPHERE INSULATOR
contract · Last action 2021-06-11
$81,650
National Aeronautics and Space Administration
IGF::OT::IGF SMALL BUSINESS SET-ASIDE, 63 OFFERS PLACE OF PERFORMANCE: VENDOR SITE FABRICATION OF COMMERCIAL SERVICES AND SUPPLIES FOR GODDARD SPACE FLIGHT CENTER THE ADVANCED MANUFACTURING BRANCH (AMB) IS RESPONSIBLE FOR MAINTAINING A COMPLETE MANUFACTURING FACILITY TO MEET THE CENTER'S RESEARCH AND DEVELOPMENT REQUIREMENTS AND ASSIST IN THE FABRICATION OF HARDWARE REQUIREMENTS FROM MULTIPLE NASA PROJECT MISSIONS. THIS FACILITY INCLUDES CONVENTIONAL MACHINING EQUIPMENT, NUMERICALLY CONTROLLED (NC) MACHINING CENTERS, SHEET METAL AND WELDING FABRICATION EQUIPMENT AND REMOTELY LOCATED STAFF SHOPS. VENDORS SHALL PROVIDE FABRICATION SERVICES AND SUPPLIES TO THE MANUFACTURING ENGINEERING GROUP IN THEIR RESPECTIVE AREAS OF EXPERTISE FOR THE DEVELOPMENT OF INSTRUMENTS AND SPACE FLIGHT AND NON-SPACEFLIGHT HARDWARE INTERCHANGEABLE PIECE PARTS. VENDORS WILL MANUFACTURE PER ENGINEERING DRAWINGS WITH AEROSPACE INDUSTRY TOLERANCES AND PROVIDE FABRICATION CAPABILITIES IN ACCORDANCE WITH THE STATEMENT OF WORK. TO FABRICATE CLOSE TOLERANCE AEROSPACE INSTRUMENTS AND SPACE FLIGHT GRADE PARTS, IN VARIOUS MATERIALS SUCH AS (BUT NOT LIMITED TO) ALUMINUM, TITANIUM, HIGH STRENGTH STEEL AND NICKEL ALLOY, ENGINEERING PLASTICS, AND COMPOSITES BASED ON INDUSTRY ENGINEERING DRAWINGS, PROVIDED IN ELECTRONIC FORMAT, TO INDUSTRY STANDARD TOLERANCES AND SPECIFICATIONS. PARTS MAY RANGE IN COMPLEXITY FROM VERY SIMPLE TO VERY COMPLEX, WITH QUANTITIES. EACH DISCIPLINE IS FURTHER DIVIDED INTO SUBCATEGORIES BASED ON THE EXPECTED SIZE OF FABRICATED PARTS. THE FABRICATIONS OF PRODUCTS OR SERVICES PROPOSED AS "SPACEFLIGHT" ARE REQUIRED TO BE, ISO 900I OR AS9100 COMPLAINT, ITEMS PROPOSED AS "NON-FLIGHT" WILL NOT REQUIRE RESPONDENTS TO BE ISO 9001 OR AS9100 COMPLIANT. OFFERS SHALL INDICATE IF THEY ARE ISO 9001 OR AS9100 COMPLAINT AND PROVIDE SUPPORTING DOCUMENTATION.
contract · Last action 2017-11-01
$77,294
Smithsonian Institution
LENS HOUSINGS; MACHINE SHOP
contract · Last action 2012-07-23
$74,530
Department of Defense
LENS SUPPORT BEAM
contract · Last action 2015-09-30
$66,540
Department of Commerce
FABRICATION OF PARTS FOR SHIM ARM DRIVE
contract · Last action 2014-01-09
$62,975
Department of Commerce
MACHINE PARTS FOR THE NCNR
contract · Last action 2014-05-29
$51,895
Smithsonian Institution
MACHINING OF FOLD MIRROR ASSEMBLY
contract · Last action 2012-08-22
$49,965
Department of Defense
PROGRAM REVIEW AND AUDIT
contract · Last action 2008-10-21
$49,800
Department of Defense
LENS SUPPORT BEAM
contract · Last action 2014-08-15
$48,550
Department of Defense
MCM-100 ASSEMBLIES
contract · Last action 2008-05-29
$48,375
Department of Commerce
MACHINE PARTS
contract · Last action 2010-05-20
$46,000
Department of Defense
DIODE RIM AND RINGS
contract · Last action 2011-09-26
$45,460
Department of Commerce
MACHINE PARTS FOR THE NCNR
contract · Last action 2014-05-29
$44,990
Department of Defense
FINISH UMM RING
contract · Last action 2010-08-06
$41,960
Department of Defense
SERVICES
contract · Last action 2009-08-21
$40,795
Smithsonian Institution
FABRICATION OF TOP COVER FOR BINOSPEC PROJECT
contract · Last action 2011-11-04
$39,750
Department of Commerce
IGF::OT::IGF BUELL MAP ENCASEMENT FABRICATION
contract · Last action 2014-05-23
$38,160
National Aeronautics and Space Administration
ALIGNMENT BLOCK
contract · Last action 2009-09-28
$37,800
Department of Defense
MACHINED PARTS
contract · Last action 2010-11-15
$33,255
Department of Defense
DETECTOR PLATE
contract · Last action 2008-09-26
$33,173
Department of Defense
RFQ 91066 - ONE RATCHET AMMO LIFT ASSEMBLY
contract · Last action 2009-08-27
$32,800
Smithsonian Institution
BINOSPEC CART MACHINING AND ASSEMBLY
contract · Last action 2011-04-29
$30,870
Department of Defense
RFQ 91035 - ONE M9 ACE VISION SYSTEM
contract · Last action 2009-08-27
$29,998

Federal contract dollars to this establishment. Primary NAICS: 332999 - ALL OTHER MISCELLANEOUS FABRICATED METAL PRODUCT MANUFACTURING. Last action: 2025-05-13. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

Date	Trigger	Violations	Serious	Penalty
1999-08-31	Planned	6	—	$0
1993-07-19	Planned	6	3	$1,224

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news