Establishment profile
TDY INDUSTRIES, INC. DBA ATI ALLDYNE
148 LITTLE COVE ROAD, GURLEY, AL, 35748
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
TDY INDUSTRIES, INC. DBA ATI ALLDYNE has accumulated 38 OSHA violations across 2 inspections over 19 years of recorded history, with $85,000 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 71 employers. Inspection frequency runs at the 59th percentile. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TDY INDUSTRIES, INC. DBA ATI ALLDYNE appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $78,500 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1000 A02 | 1 | 1 | $20,000 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0106 E05 V | 1 | 1 | $4,500 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0165 D01 | 1 | 1 | $4,500 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0120 Q01 | 1 | 1 | $4,000 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0119 E01 | 1 | 1 | $3,800 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0119 J02 | 1 | 1 | $3,800 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0119 D02 I | 1 | 1 | $3,800 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0119 J05 | 1 | 1 | $3,800 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0119 F01 ID | 1 | 1 | $3,800 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | $3,500 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0146 D05 I | 1 | 1 | $2,500 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0146 K02 IV | 1 | 1 | $2,500 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0106 H04 IIC | 1 | 1 | $2,500 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0146 D03 III | 1 | 1 | $2,250 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0106 B06 | 1 | 1 | $2,250 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0132 A | 1 | 1 | $2,250 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0151 C | 1 | 1 | $2,250 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | $2,250 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0106 H04 IVA | 1 | 1 | $2,250 | Nov 2007 | Nov 2007 |
| 29 CFR 1910.0106 B02 VIIA | 1 | 1 | $2,000 | Nov 2007 | Nov 2007 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3328 within AL. Peer group: 71 employers. This establishment has 38 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TDY INDUSTRIES, INC. DBA ATI ALLDYNE. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-07-11 | Referral | 31 | 26 | $61,000 | |
| 2007-05-29 | Complaint | 7 | 1 | $24,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within AL, ordered by federal enforcement volume:
- ADVANCED TECHNICAL FINISHING, LLCHUNTSVILLE — 3 federal enforcement records
- ALABAMA PLATING TECHNOLOGY, LLCLANETT — 2 federal enforcement records
- NUTEC METAL FINISHING, LLCBIRMINGHAM — 2 federal enforcement records
- TECHTRIX, INC.GADSDEN — 2 federal enforcement records
- MOTHERSON ELECTROPLATING US LLCNORTHPORT — 1 federal enforcement record
- PRECISION METAL FINISHING, INC.MOBILE — 1 federal enforcement record
- GEORGIA PLATING TECHNOLOGY, LLCLANETT — 1 federal enforcement record
- ALABAMA PLATING CORPORATIONEIGHT MILE — 1 federal enforcement record
- GULF COAST GALVANIZING, INC.CITRONELLE — 1 federal enforcement record
- DSI, L.L.C.THEODORE — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in ALState-wide enforcement data
- Electroplating, Plating, Polishing, in ALIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on TDY INDUSTRIES, INC. DBA ATI ALLDYNE from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TDY INDUSTRIES, INC. DBA ATI ALLDYNE's OSHA violation history?
- TDY INDUSTRIES, INC. DBA ATI ALLDYNE has 2 OSHA inspections on record with 38 violations and $85,000 in total penalties.
- How does TDY INDUSTRIES, INC. DBA ATI ALLDYNE's safety record compare to its industry?
- TDY INDUSTRIES, INC. DBA ATI ALLDYNE operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.