Establishment profile
SUHNER MANUFACTURING, INC.
43 ANDERSON RD. SW. PLANT 1, ROME, GA, 30161
333515 — Cutting Tool and Machine Tool Accessory Manufacturing
Summary
SUHNER MANUFACTURING, INC. has accumulated 11 OSHA violations across 5 inspections over 10 years of recorded history, with $23,689 in total assessed penalties.
The establishment sits in the 75th percentile for violations within its industry-state peer group of 37 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 6 years ago.
Federal records were found in 1 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SUHNER MANUFACTURING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Peer comparison
Above average violations in NAICS 3335 within GA. Peer group: 37 employers. This establishment has 11 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SUHNER MANUFACTURING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Apr 2016 – Sep 2019
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Sep 10, 2019 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), unspecified | Amputation | |
| Oct 19, 2018 | Caught in running equipment or machinery, unspecified | Finger(s), fingernail(s), n.e.c. | Amputation | |
| May 8, 2017 | Compressed or pinched by shifting objects or equipment | Finger(s), fingernail(s), unspecified | Hospitalized | |
| Apr 25, 2016 | Struck by object falling from vehicle or machinery-other than vehicle part | Finger(s), fingernail(s), unspecified | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Sep 10, 2019 | Activated,Amputation,Caught By,Fingertip,Glove,Lathe,Metal Lathe,Pinched,Reach,Rotating Parts | 1 | 1 | — | |
| Oct 18, 2018 | Amputated,Amputation,Caught By,Finger,Gear,Hand,Pinched | 1 | 1 | — | |
| May 8, 2017 | Amputation,Caught In,Crushing,Finger,Machine Guarding | 1 | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SUHNER MANUFACTURING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SUHNER MANUFACTURING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SUHNER MANUFACTURING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for SUHNER MANUFACTURING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SUHNER MANUFACTURING, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SUHNER MANUFACTURING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-09-13 | Referral | 2 | 2 | $5,089 | |
| 2018-10-29 | Referral | 3 | 3 | $8,751 | |
| 2017-05-17 | Referral | 2 | 2 | $7,605 | |
| 2016-12-06 | Planned | 4 | 1 | $2,244 | |
| 2016-05-03 | Referral | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in cutting tool and machine tool accessory manufacturing within GA, ordered by federal enforcement volume:
- SOUTHERN CARBIDE SPECIALISTSQUITMAN — 1 federal enforcement record
Related searches
- Cutting Tool and Machine Tool Accessory ManufacturingAll employers in this industry
- Employers in GAState-wide enforcement data
- Cutting Tool and in GAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on SUHNER MANUFACTURING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is SUHNER MANUFACTURING, INC.'s OSHA violation history?
- SUHNER MANUFACTURING, INC. has 5 OSHA inspections on record with 11 violations and $23,689.2 in total penalties.
- How does SUHNER MANUFACTURING, INC.'s safety record compare to its industry?
- SUHNER MANUFACTURING, INC. operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2.