Establishment profile
SCHMID TOOL & ENGINEERING CORPORATION
9101 WEST BELDEN AVENUE, FRANKLIN PARK, IL, 60131
332710 — Machine Shops
Summary
SCHMID TOOL & ENGINEERING CORPORATION has accumulated 8 OSHA violations across 3 inspections over 43 years of recorded history, with $5,500 in total assessed penalties.
The establishment sits in the 71st percentile for violations within its industry-state peer group of 637 employers. Inspection frequency runs at the 74th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SCHMID TOOL & ENGINEERING CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
33% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 8 distinct standards shown · 8 citations in this view · $5,500 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,500 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $750 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0217 B07 VC | 1 | 1 | $650 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0217 D09 I | 1 | 1 | $650 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $650 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0219 B01 | 1 | 1 | $650 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $650 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0217 E01 II | 1 | 1 | — | Nov 2004 | Nov 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3327 within IL. Peer group: 637 employers. This establishment has 8 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SCHMID TOOL & ENGINEERING CORPORATION. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense4507095258!HAMMER ANcontract · Last action 2008-03-18$201,750
- Department of Defense4506281902!HAMMER ANcontract · Last action 2007-12-08$201,750
- Department of Defense4506281927!HAMMER ANcontract · Last action 2007-12-08$201,750
- Department of Defense4511533999!HAMMER AND HAMMER Pcontract · Last action 2009-08-01$98,442
- Department of Defense4515944131!HAMMER AND HAMMER Pcontract · Last action 2010-10-25$69,622
- Department of Defense4505970964!HAMMER,FIcontract · Last action 2007-10-30$67,840
- Department of Defense4506872654!HAMMER,FIcontract · Last action 2008-02-22$50,880
- Department of Defense4507318521!CONNECTORcontract · Last action 2008-04-11$48,790
- Department of Defense4515199518!HAMMER AND HAMMER Pcontract · Last action 2010-08-12$45,803
- Department of Defense4508577635!HAMMER,FIcontract · Last action 2008-09-08$29,451
- Department of Defense4515721947!HAMMER AND HAMMER Pcontract · Last action 2010-09-29$20,175
- Department of Defense4508859838!HAMMER AND HAMMER Pcontract · Last action 2008-10-09$17,238
- Department of Defense4508518675!HAMMER ANcontract · Last action 2008-09-02$17,238
- Department of Defense4505758819!EXPANSIONcontract · Last action 2007-10-03$15,539
- Department of Defense4505749389!GEARSHAFTcontract · Last action 2007-10-02$15,539
- Department of Defense4505735964!FRAME,HANcontract · Last action 2007-10-01$15,539
- Department of Defense4505279070!HAMMER,FIcontract · Last action 2011-05-23$14,659
- Department of DefenseHAMMER/PIN ASSY-contract · Last action 2011-10-21$-8
Federal contract dollars to this establishment. Primary NAICS: 332994 - SMALL ARMS MANUFACTURING. Last action: 2011-10-21. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-05-18 | Planned | 0 | — | $0 | |
| 2004-09-15 | Planned | 8 | 8 | $5,500 | |
| 1983-05-26 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within IL, ordered by federal enforcement volume:
- MECHANICAL DEVICES COMPANYBLOOMINGTON — 3 federal enforcement records
- RIVERSTONE GROUP, INC.ROCK ISLAND — 3 federal enforcement records
- AMTEC PRECISION PRODUCTS, INC.ELGIN — 3 federal enforcement records
- ROCKFORD BALL SCREW COMPANYROCKFORD — 2 federal enforcement records
- A.M. PRECISION MACHINING, INC.ELK GROVE VILLAGE — 2 federal enforcement records
- ACCURATE METAL FABRICATING, INC.CICERO — 2 federal enforcement records
- ABRASIVE-FORM, LLCBLOOMINGDALE — 2 federal enforcement records
- SERRA LASER PRECISION, LLCLIBERTYVILLE — 2 federal enforcement records
- MIDSTATE MANUFACTURING COMPANYGALESBURG — 2 federal enforcement records
- FASTENAL COMPANYLOVES PARK — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in ILState-wide enforcement data
- Machine Shops in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SCHMID TOOL & ENGINEERING CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SCHMID TOOL & ENGINEERING CORPORATION's OSHA violation history?
- SCHMID TOOL & ENGINEERING CORPORATION has 3 OSHA inspections on record with 8 violations and $5,500 in total penalties.
- How does SCHMID TOOL & ENGINEERING CORPORATION's safety record compare to its industry?
- SCHMID TOOL & ENGINEERING CORPORATION operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.