Skip to main content

Establishment profile

RPS MACHINERY SALES, INC.

175 OLD ROUTE 220 HWY.,, JERSEY SHORE, PA, 17740
332312Fabricated Structural Metal Manufacturing
EIN 232113143

Download as PDF →

OSHA inspections
2
over 12 years
Violations
10
$6,375 in penalties
Penalties
$6,375
$638 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

RPS MACHINERY SALES, INC. has accumulated 10 OSHA violations across 2 inspections over 12 years of recorded history, with $6,375 in total assessed penalties.

The establishment sits in the 67th percentile for violations within its industry-state peer group of 978 employers. Inspection frequency runs at the 41st percentile. The most recent enforcement activity was recorded 7 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

RPS MACHINERY SALES, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
2
0.2 / yr · last 12 yrs
Violations
10
0.8 / yr
Penalties
$6,375
$638 avg / violation
80% serious20% other
Inspection trigger · planned
2 of 2

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $6,375 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0215 A0411$1,020Feb 2014Feb 2014
29 CFR 1910.0242 B11$1,020Feb 2014Feb 2014
29 CFR 1910.0243 C0311$1,020Feb 2014Feb 2014
29 CFR 1910.1200 F0511$1,020Feb 2014Feb 2014
29 CFR 1910.0037 B0211$765Feb 2014Feb 2014
29 CFR 1910.0147 C07 I11$765Feb 2014Feb 2014
29 CFR 1910.0305 G01 IV A11$765Feb 2014Feb 2014
29 CFR 1910.0147 C06 I11Feb 2014Feb 2014
29 CFR 1910.0106 D02 I11Feb 2014Feb 2014
29 CFR 1910.0215 B0911Feb 2014Feb 2014

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

67th

Above average violations in NAICS 3323 within PA. Peer group: 978 employers. This establishment has 10 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
74th
peer median: $1,785
Inspection frequency
41st
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−1.8
TRIR
0.0
vs industry
−3.4

Reported for 16 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for RPS MACHINERY SALES, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
7 years ago

No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for RPS MACHINERY SALES, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for RPS MACHINERY SALES, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for RPS MACHINERY SALES, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for RPS MACHINERY SALES, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for RPS MACHINERY SALES, INC.. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
300633
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for RPS MACHINERY SALES, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2018-12-03Planned0$0
2014-01-23Planned108$6,375

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within PA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on RPS MACHINERY SALES, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is RPS MACHINERY SALES, INC.'s OSHA violation history?
RPS MACHINERY SALES, INC. has 2 OSHA inspections on record with 10 violations and $6,375 in total penalties.
How does RPS MACHINERY SALES, INC.'s safety record compare to its industry?
RPS MACHINERY SALES, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4. RPS MACHINERY SALES, INC.'s self-reported DART rate is 0 compared to an industry average of 1.8.