Establishment profile
RIVERSIDE MACHINE AND ENGINEERING, INC.
206 CASHMAN DRIVE, CHIPPEWA FALLS, WI, 54729
332710 — Machine Shops
Summary
RIVERSIDE MACHINE AND ENGINEERING, INC. has accumulated 29 OSHA violations across 3 inspections over 25 years of recorded history, with $6,950 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 385 employers. Inspection frequency runs at the 77th percentile. The most recent enforcement activity was recorded 15 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
RIVERSIDE MACHINE AND ENGINEERING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $6,950 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 I | 2 | 2 | — | Feb 2001 | Jul 2011 |
| 29 CFR 1910.0305 G01 IVA | 1 | 1 | $2,079 | Jul 2011 | Jul 2011 |
| 29 CFR 1910.0022 A02 | 1 | 1 | $1,664 | Jul 2011 | Jul 2011 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,248 | Jul 2011 | Jul 2011 |
| 29 CFR 1910.1030 C01 IV | 1 | 1 | $613 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $490 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0147 C03 II | 1 | 1 | $490 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $368 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0134 H04 | 1 | 1 | — | Jul 2011 | Jul 2011 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Jul 2011 | Jul 2011 |
| 29 CFR 1910.0147 F04 | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0333 B02 | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.1030 C02 I | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.1030 F01 IIA | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.1030 F02 IV | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.1030 F03 | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | — | Feb 2001 | Feb 2001 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within WI. Peer group: 385 employers. This establishment has 29 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
RIVERSIDE MACHINE AND ENGINEERING CO 206 CASHMAN DR · CHIPPEWA FALLS, WI, 54729 | RCRA | No Violation Identified | 0 | 0 | — | Aug 2012 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for RIVERSIDE MACHINE AND ENGINEERING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 332811 - METAL HEAT TREATING. Last action: 2011-12-15. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-06-03 | Complaint | 6 | 3 | $4,990 | |
| 2005-07-22 | Planned | 0 | — | $0 | |
| 2001-01-25 | Planned | 23 | 21 | $1,960 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within WI, ordered by federal enforcement volume:
- HYPRO INC.WATERFORD — 2 federal enforcement records
- TED GROB CORPORATIONGRAFTON — 2 federal enforcement records
- MILLENNIUM TECHNOLOGIES, LLCPLYMOUTH — 2 federal enforcement records
- DYNATECT MANUFACTURING, INC.NEW BERLIN — 2 federal enforcement records
- V & L TOOL, LLCWAUKESHA — 2 federal enforcement records
- MILLER MACHINED PRODUCTS, INCENDEAVOR — 2 federal enforcement records
- INNOVATIVE MACHINING LLCNEENAH — 2 federal enforcement records
- HYPRO INCORPORATEDBERLIN — 2 federal enforcement records
- SUSSEK MACHINE COMPANY, LLCWATERLOO — 2 federal enforcement records
- REXNORD INCMilwaukee — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in WIState-wide enforcement data
- Machine Shops in WIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on RIVERSIDE MACHINE AND ENGINEERING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is RIVERSIDE MACHINE AND ENGINEERING, INC.'s OSHA violation history?
- RIVERSIDE MACHINE AND ENGINEERING, INC. has 3 OSHA inspections on record with 29 violations and $6,950 in total penalties.
- How does RIVERSIDE MACHINE AND ENGINEERING, INC.'s safety record compare to its industry?
- RIVERSIDE MACHINE AND ENGINEERING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.