Establishment profile
RADKE MACHINE & TOOL, INC.
607 NE 4TH STREET, HUBBARD, TX, 76648
332710 — Machine Shops
Summary
RADKE MACHINE & TOOL, INC. has accumulated 26 OSHA violations across 5 inspections over 21 years of recorded history, with $14,346 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 491 employers. Inspection frequency runs at the 96th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
RADKE MACHINE & TOOL, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $14,346 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0133 A03 | 2 | 2 | $2,700 | Oct 2008 | Dec 2012 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $1,375 | Oct 2008 | Dec 2012 |
| 29 CFR 1910.1200 E01 | 2 | 2 | $525 | Jan 2005 | Oct 2008 |
| 29 CFR 1910.0215 A04 | 2 | 2 | $300 | Jan 2005 | Oct 2008 |
| 29 CFR 1910.0215 B09 | 2 | 2 | — | Jan 2005 | Oct 2008 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $2,173 | Mar 2017 | Mar 2017 |
| 29 CFR 1910.0147 C07 I A | 1 | 1 | $2,173 | Mar 2017 | Mar 2017 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $750 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $750 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0305 B02 I | 1 | 1 | $750 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $750 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0303 G01 | 1 | 1 | $525 | Oct 2008 | Oct 2008 |
| 29 CFR 1904.0002 A | 1 | 1 | $338 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0305 A04 V | 1 | 1 | $338 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $338 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $338 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0303 F01 | 1 | 1 | $225 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0147 F02 I | 1 | 1 | — | Mar 2017 | Mar 2017 |
| 29 CFR 1910.0037 B05 | 1 | 1 | — | Oct 2008 | Oct 2008 |
| 29 CFR 1904.0029 A | 1 | 1 | — | Oct 2008 | Oct 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within TX. Peer group: 491 employers. This establishment has 26 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for RADKE MACHINE & TOOL, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for RADKE MACHINE & TOOL, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for RADKE MACHINE & TOOL, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for RADKE MACHINE & TOOL, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for RADKE MACHINE & TOOL, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for RADKE MACHINE & TOOL, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for RADKE MACHINE & TOOL, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for RADKE MACHINE & TOOL, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-04-11 | Follow-up | 0 | — | $0 | |
| 2017-01-10 | Complaint | 3 | 3 | $4,346 | |
| 2012-11-01 | Planned | 2 | — | $3,400 | |
| 2008-07-31 | Planned | 13 | 11 | $5,250 | |
| 2004-12-17 | Planned | 8 | 5 | $1,350 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within TX, ordered by federal enforcement volume:
- AUTOMATIC PRODUCTS CORP.GARLAND — 3 federal enforcement records
- CATERPILLAR, INC.SAN ANTONIO — 3 federal enforcement records
- S & S MACHINING & FABRICATION, INCGROESBECK — 2 federal enforcement records
- DOOLING MACHINE PRODUCTS, INC.FREEPORT — 2 federal enforcement records
- TEAM INDUSTRIAL SERVICES, INC.HOUSTON — 2 federal enforcement records
- P&N MACHINE CO., INC.HOUSTON — 2 federal enforcement records
- GREAT SOUTHWEST TOOL CO.EL PASO — 2 federal enforcement records
- QUALITY INDUSTRIAL FABRICATION INC.HOUSTON — 2 federal enforcement records
- ARROW MANUFACTURED PRODUCTSWICHITA FALLS — 2 federal enforcement records
- COMMERCE GRINDINGDALLAS — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in TXState-wide enforcement data
- Machine Shops in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on RADKE MACHINE & TOOL, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is RADKE MACHINE & TOOL, INC.'s OSHA violation history?
- RADKE MACHINE & TOOL, INC. has 5 OSHA inspections on record with 26 violations and $14,346 in total penalties.
- How does RADKE MACHINE & TOOL, INC.'s safety record compare to its industry?
- RADKE MACHINE & TOOL, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.