Skip to main content

Establishment profile

PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF

80 MOTIVATION DRIVE, LAWRENCEBURG, TN, 38464
332312Fabricated Structural Metal Manufacturing

Download as PDF →

OSHA inspections
2
over 14 years
Violations
25
$3,050 in penalties
Penalties
$3,050
$122 avg

Summary

PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF has accumulated 25 OSHA violations across 2 inspections over 14 years of recorded history, with $3,050 in total assessed penalties.

The establishment sits in the 78th percentile for violations within its industry-state peer group of 400 employers. Inspection frequency runs at the 41st percentile. The most recent enforcement activity was recorded 12 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.1 / yr · last 14 yrs
Violations
25
1.8 / yr
Penalties
$3,050
$122 avg / violation
44% serious56% other
Inspection trigger · planned
2 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $3,050 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0094 A0611$1,050Apr 2012Apr 2012
29 CFR 1910.0253 B04 III11$1,000Oct 2013Oct 2013
29 CFR 1910.0134 C0111$750Apr 2012Apr 2012
29 CFR 1910.0095 D0111$150Apr 2012Apr 2012
29 CFR 1910.0157 E0211$100Oct 2013Oct 2013
29 CFR 1910.0212 B11Oct 2013Oct 2013
29 CFR 1910.0179 J0311Oct 2013Oct 2013
29 CFR 1910.0304 G0511Oct 2013Oct 2013
29 CFR 1910.0305 G02 II11Oct 2013Oct 2013
29 CFR 1910.0334 A02 I11Oct 2013Oct 2013
29 CFR 1910.0303 G02 I11Oct 2013Oct 2013
29 CFR 1910.0179 M0111Oct 2013Oct 2013
29 CFR 1910.0022 D0111Apr 2012Apr 2012
29 CFR 9000.60211Apr 2012Apr 2012
29 CFR 1910.0095 I0411Apr 2012Apr 2012
29 CFR 1910.0095 K0111Apr 2012Apr 2012
29 CFR 1910.0095 L0111Apr 2012Apr 2012
29 CFR 1910.0134 E0111Apr 2012Apr 2012
29 CFR 1910.0134 E06 I11Apr 2012Apr 2012
29 CFR 1910.0134 F0211Apr 2012Apr 2012

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

78th

Above average violations in NAICS 3323 within TN. Peer group: 400 employers. This establishment has 25 OSHA violations; peer median is 10.

Fewer violationsMore violations
Penalty percentile
62nd
peer median: $1,800
Inspection frequency
41st
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
12 years ago

No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2013-09-12Planned91$1,100
2011-11-03Planned1610$1,950

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within TN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF's OSHA violation history?
PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF has 2 OSHA inspections on record with 25 violations and $3,050 in total penalties.
How does PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF's safety record compare to its industry?
PRO-FAB INDUSTRIES US INC DBA PRECISION LASER & MF operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.