Establishment profile
PCS CO
34488 DOREKA, FRASER, MI, 48026
Operated by Dayton Lamina · 1 of 2 establishments
332117 — Powder Metallurgy Part Manufacturing
EIN 381628392
Summary
PCS CO has accumulated 18 OSHA violations across 4 inspections over 36 years of recorded history, with $1,300 in total assessed penalties.
The establishment sits in the 61st percentile for violations within its industry-state peer group of 258 employers. Inspection frequency runs at the 63rd percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PCS CO appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3321 within MI. Peer group: 258 employers. This establishment has 18 OSHA violations; peer median is 11.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 109 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PCS CO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PCS CO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PCS CO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
Company-level in MI — for Dayton Lamina, not this location alone
National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other Dayton Lamina locations in the same state.
NLRB cases
National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 1 case · 1 representation
| Case number | Type | Filed | Closed | Status | Region |
|---|---|---|---|---|---|
| 07-RC-023396 | Representation election | Nov 2010 | Nov 2010 | Closed | Region 07, Detroit, Michigan |
Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PCS CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PCS CO. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
PCS CO 34500 DOREKA DRIVE · FRASER, MI, 48026 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for PCS CO. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2005-11-10 | Monitoring | 0 | — | $0 | |
| 2005-04-12 | Complaint | 3 | 3 | $1,300 | |
| 1995-08-31 | Planned | 5 | — | $0 | |
| 1990-02-01 | Planned | 10 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
PCS CO is one of 2 establishments rolled up under the parent organization Dayton Lamina.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Dayton Lamina across all 2 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in powder metallurgy part manufacturing within MI, ordered by federal enforcement volume:
- MIBA HYDRAMECHANICA CORPSTERLING HEIGHTS — 2 federal enforcement records
- BUNTING BEARINGS LLCPORTAGE — 2 federal enforcement records
- PARADIGM SINTERED PRODUCTS INCBATTLE CREEK — 2 federal enforcement records
- SINTERED METAL PRODUCTS INCCOLDWATER — 1 federal enforcement record
- FLUXTROL INCAUBURN HILLS — 1 federal enforcement record
- CARO CARBIDE CORPTROY — 1 federal enforcement record
- GKN SINTER METALS LLCAUBURN HILLS — 1 federal enforcement record
Related searches
- All Dayton Lamina locationsParent rollup
- Powder Metallurgy Part ManufacturingAll employers in this industry
- Employers in MIState-wide enforcement data
- Powder Metallurgy Part in MIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on PCS CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Dayton Lamina, which operates 2 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is PCS CO's OSHA violation history?
- PCS CO has 4 OSHA inspections on record with 18 violations and $1,300 in total penalties.
- How does PCS CO's safety record compare to its industry?
- PCS CO operates in the powder metallurgy part manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. PCS CO's self-reported DART rate is 2.5 compared to an industry average of 1.1.