Skip to main content

Establishment profile

P & G WELDING AND FABRICATION SPECIALTIES, INC.

6801 POWER LINE DRIVE, FLORENCE, KY, 41042
333922Conveyor and Conveying Equipment Manufacturing

Download as PDF →

OSHA inspections
5
over 30 years
Violations
21
$2,100 in penalties
Penalties
$2,100
$100 avg
Accident investigations on record
1 OSHA follow-up

Summary

P & G WELDING AND FABRICATION SPECIALTIES, INC. has accumulated 21 OSHA violations across 5 inspections over 30 years of recorded history, with $2,100 in total assessed penalties.

The establishment sits in the 91st percentile for violations within its industry-state peer group of 130 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 12 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

P & G WELDING AND FABRICATION SPECIALTIES, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.2 / yr · last 30 yrs
Violations
21
0.7 / yr
Penalties
$2,100
$100 avg / violation
38% serious62% other
Inspection trigger · planned
4 of 5
Inspection trigger · follow-up
1 of 5

60% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 21 citations in this view · $2,100 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II22$675Jan 1996Jul 2004
29 CFR 1910.1200 E0122Jan 1996Aug 2002
29 CFR 1910.0147 C04 I11$375Jul 2004Jul 2004
29 CFR 1910.0107 B05 IV11$375Jul 2004Jul 2004
29 CFR 1910.0107 E0211$375Jul 2004Jul 2004
29 CFR 1910.0107 C0211$300Jul 2004Jul 2004
29 CFR 1910.0107 B05 I11Jul 2004Jul 2004
29 CFR 1910.0147 C0511Jul 2004Jul 2004
29 CFR 1910.0178 L0611Jul 2004Jul 2004
29 CFR 1910.0147 C07 I11Jul 2004Jul 2004
29 CFR 2031.00211Aug 2002Aug 2002
29 CFR 1910.0095 C0111Aug 2002Aug 2002
29 CFR 1910.0134 C0111Aug 2002Aug 2002
29 CFR 1910.0134 D03 IIIB211Aug 2002Aug 2002
29 CFR 1910.0134 E0111Aug 2002Aug 2002
29 CFR 1910.0134 K0111Aug 2002Aug 2002
29 CFR 1910.1030 G02 VIIA11Aug 2002Aug 2002
29 CFR 2031.0010211Jan 1996Jan 1996
29 CFR 1910.0037 K0211Jan 1996Jan 1996

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

91st

Worse on violations than most other employers in NAICS 3339 within KY. Peer group: 130 employers. This establishment has 21 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
56th
peer median: $1,538
Inspection frequency
86th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.4
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
12 years ago

No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for P & G WELDING AND FABRICATION SPECIALTIES, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2013-07-02Planned0$0
2005-09-09Follow-up0$0
2004-05-19Planned97$1,800
2002-04-11Planned8$0
1995-11-09Planned41$300

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in conveyor and conveying equipment manufacturing within KY, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on P & G WELDING AND FABRICATION SPECIALTIES, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is P & G WELDING AND FABRICATION SPECIALTIES, INC.'s OSHA violation history?
P & G WELDING AND FABRICATION SPECIALTIES, INC. has 5 OSHA inspections on record with 21 violations and $2,100 in total penalties.
How does P & G WELDING AND FABRICATION SPECIALTIES, INC.'s safety record compare to its industry?
P & G WELDING AND FABRICATION SPECIALTIES, INC. operates in the conveyor and conveying equipment manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.4.