Establishment profile
ODM TOOL & MANUFACTURING CO., INC.
9550 JOLIET RD., MCCOOK, IL, 60525
Summary
ODM TOOL & MANUFACTURING CO., INC. has accumulated 15 OSHA violations across 3 inspections over 27 years of recorded history, with $8,492 in total assessed penalties.
The establishment sits in the 65th percentile for violations within its industry-state peer group of 230 employers. Inspection frequency runs at the 48th percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ODM TOOL & MANUFACTURING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 15 citations in this view · $8,492 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 C01 I | 1 | 1 | $2,000 | Apr 1999 | Apr 1999 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $1,500 | Mar 2000 | Mar 2000 |
| 29 CFR 1910.0217 B08 III | 1 | 1 | $1,000 | Apr 1999 | Apr 1999 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,000 | Apr 1999 | Apr 1999 |
| 29 CFR 1910.0178 L06 | 1 | 1 | $700 | May 2006 | May 2006 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | $700 | May 2006 | May 2006 |
| 29 CFR 1910.0217 C02 IA | 1 | 1 | $700 | May 2006 | May 2006 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $446 | May 2006 | May 2006 |
| 29 CFR 1910.0217 B08 I | 1 | 1 | $446 | May 2006 | May 2006 |
| 29 CFR 1910.0147 C05 II | 1 | 1 | — | May 2006 | May 2006 |
| 29 CFR 1910.0147 C05 I | 1 | 1 | — | May 2006 | May 2006 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | May 2006 | May 2006 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | May 2006 | May 2006 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | — | May 2006 | May 2006 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Mar 2000 | Mar 2000 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3321 within IL. Peer group: 230 employers. This establishment has 15 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ODM TOOL & MANUFACTURING CO 9550 JOLIET RD. · MC COOK, IL, 60525 | AirRCRA | No Violation Identified | 0 | 0 | — | Aug 2009 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ODM TOOL & MANUFACTURING CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-03-09 | Planned | 10 | 10 | $2,992 | |
| 2000-03-02 | Planned | 2 | 1 | $1,500 | |
| 1999-02-22 | Planned | 3 | 3 | $4,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within IL, ordered by federal enforcement volume:
- SET ENTERPRISES, INC.SAUK VILLAGE — 4 federal enforcement records
- EATON ELECTRICAL INC.LINCOLN — 3 federal enforcement records
- ACCURATE PERFORATING COMPANYCHICAGO — 2 federal enforcement records
- PRINCIPAL MANUFACTURING CORP.BROADVIEW — 2 federal enforcement records
- MJ CELCO, INC.SCHILLER PARK — 2 federal enforcement records
- RTM TREND INC.FRANKLIN PARK — 2 federal enforcement records
- INTERPLEX DAYSTAR, INC.FRANKLIN PARK — 2 federal enforcement records
- ALPHA PRODUCTS, INC.CHICAGO — 2 federal enforcement records
- THE LINE GROUP, INC.ARLINGTON HTS — 2 federal enforcement records
- PETERSON MANUFACTURING CO., INC.PLAINFIELD — 2 federal enforcement records
Related searches
- NAICS 332All employers in this industry
- Employers in ILState-wide enforcement data
- Industry in ILIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ODM TOOL & MANUFACTURING CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ODM TOOL & MANUFACTURING CO., INC.'s OSHA violation history?
- ODM TOOL & MANUFACTURING CO., INC. has 3 OSHA inspections on record with 15 violations and $8,491.8 in total penalties.