Skip to main content
FastDOL

Establishment profile

N. H. BRAGG AND SONS

92 PERRY ROAD, BANGOR, ME, 04401

Download as PDF →

OSHA inspections
2
over 51 years
Violations
18
$55 in penalties
Penalties
$55
$3 avg

Summary

N. H. BRAGG AND SONS has accumulated 18 OSHA violations across 2 inspections over 51 years of recorded history, with $55 in total assessed penalties.

The establishment sits in the 96th percentile for violations within its industry-state peer group of 11,664 employers. Inspection frequency runs at the 81st percentile. The most recent enforcement activity was recorded 31 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

N. H. BRAGG AND SONS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.0 / yr · last 51 yrs
Violations
18
0.4 / yr
Penalties
$55
$3 avg / violation
Inspection trigger · complaint
1 of 2
Inspection trigger · planned
1 of 2

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 18 citations in this view · $55 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0178 G1011$30Mar 1975Mar 1975
29 CFR 1910.0219 F01 I11$25Mar 1975Mar 1975
29 CFR 1910.0136 A11—Aug 1994Aug 1994
29 CFR 1910.0178 Q0111—Aug 1994Aug 1994
29 CFR 1910.1200 E01 II11—Aug 1994Aug 1994
29 CFR 1910.1200 H11—Aug 1994Aug 1994
29 CFR 1910.0037 Q0211—Mar 1975Mar 1975
29 CFR 1910.0141 C01 VI11—Mar 1975Mar 1975
29 CFR 1910.0022 B0211—Mar 1975Mar 1975
29 CFR 1910.0179 G05 IIIB011—Mar 1975Mar 1975
29 CFR 1910.0215 A0411—Mar 1975Mar 1975
29 CFR 1910.0219 E05 II11—Mar 1975Mar 1975
29 CFR 1910.0157 A0511—Mar 1975Mar 1975
29 CFR 1910.0022 D0111—Mar 1975Mar 1975
29 CFR 1910.0023 A0111—Mar 1975Mar 1975
29 CFR 1910.0023 D01 II11—Mar 1975Mar 1975
29 CFR 1910.0036 B0511—Mar 1975Mar 1975
29 CFR 1910.0037 Q0111—Mar 1975Mar 1975

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

96th

Worse on violations than nearly every other employer. Peer group: 11,664 employers. This establishment has 18 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
48th
peer median: $81
Inspection frequency
81st
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for N. H. BRAGG AND SONS. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Planned
1
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for N. H. BRAGG AND SONS. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
31 years ago

No federal enforcement activity has been recorded against this establishment in 31+ years. Most recent activity: 31 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for N. H. BRAGG AND SONS. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for N. H. BRAGG AND SONS. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for N. H. BRAGG AND SONS. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for N. H. BRAGG AND SONS. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for N. H. BRAGG AND SONS. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for N. H. BRAGG AND SONS. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$7.9M
Awards
7,028
Top agency
General Services Administration
$7.3M
Top agencies by obligation (this location)
General Services Administration$7.3M
Department of Defense$578K
Department of the Interior$5K
Largest awards (top 50 of 7,028)
  • General Services Administration
    CUTTER, STEEL STRAPPING (SAFETY TYPE): - SEE ATT ACHED DOCUMENT FOR DETAI MFG IN US
    contract · Last action 2014-05-09
    $145,512
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-26
    $98,592
  • General Services Administration
    SEE DESCRIPTION IN BPA
    contract · Last action 2013-09-18
    $90,255
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-26
    $75,998
  • General Services Administration
    HAMMER DRILL, HYDRAULIC: TYPE: HAMMER-DRILL, HYD RAULIC, PORTABLE OVERALL LENGTH: 22-1/2" OVERALL WIDTH: 14" HANDLE TYPE: STRAIGHT SIDE HOLE DRIL LING CAPACITY: 1/2" TO 2" DIAMETER X 30" DEEP RP M: 0 TO 300 PSI PRESSURE: 1500 TO 2000 FLOW RATE : 7 TO 9 GPM MOTOR TYPE: INTERNAL PIPE HOSE END CONNECTION: 3/8" MALE FUNCTIONAL DESCRIPTION: US ED FOR DRILLING GAS AND WATER UTILITY TEST HOLES AND FOR SETTING ANCHOR BOLTS GENERAL CHARACTERI STICS: OPEN CENTER; USES SKIL 736 TYPE CARBIDE T IPPED FLUTED DRILLS; INCLUDES HOSE WHIPS UNPACKA GED UNIT WEIGHT: 45 LBS (PARTIAL DESCRIPTION)
    contract · Last action 2014-12-04
    $71,100
  • Department of Defense
    VLS FALL PROTECTION
    contract · Last action 2012-01-31
    $68,817
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-11-05
    $67,782
  • General Services Administration
    CRIMPER, BLASTING CAP: POWER PUNCH , CORD/FUSE C UTTER AND DUAL CRIMP FUNCTION. MATERIAL: ALUMINU M OVERALL LENGTH: 6.00" OVERALL WIDTH: 1.00" ALL EN-VANGUARD PN MK6 OR EQUAL (PARTIAL DESCRIPTION ) EXPEDITE
    contract · Last action 2009-11-18
    $58,200
  • Department of Defense
    SELF RETRACTING LIFELINE
    contract · Last action 2011-01-12
    $51,746
  • Department of Defense
    8503725780!BATTERY,STORAGE
    contract · Last action 2016-10-05
    $49,940
  • General Services Administration
    TAS::47 4534 001::TAS CUTTER, BOLT: IAW CID A-A-3047, DATED NOVEMBER 6 1996, AND NOTICE 2, DATED NOVEMBER 30, 2001. CL ASS: 1 (ANGULAR CUT [FLUSH CUTTING]). OVERALL LE NGTH: 36" . CUTTING CAPACITY: 9/16" . (PARTIAL DES CRIPTION)
    contract · Last action 2010-08-03
    $43,645
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-05-23
    $42,758
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-03-25
    $40,825
  • Department of Defense
    KIT, TOOL
    contract · Last action 2009-07-13
    $39,758
  • Department of Defense
    WRENCH, TORQUE
    contract · Last action 2009-05-27
    $39,529
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-12
    $35,567
  • General Services Administration
    TAS::47 4534 001::TAS PRODUCT MANUFACTURED IN USA
    contract · Last action 2010-12-01
    $35,284
  • General Services Administration
    HAMMER DRILL, HYDRAULIC: TYPE: HAMMER-DRILL, HYD RAULIC, PORTABLE OVERALL LENGTH: 22-1/2" OVERALL WIDTH: 14" HANDLE TYPE: STRAIGHT SIDE HOLE DRIL LING CAPACITY: 1/2" TO 2" DIAMETER X 30" DEEP RP M: 0 TO 300 PSI PRESSURE: 1500 TO 2000 FLOW RATE : 7 TO 9 GPM MOTOR TYPE: INTERNAL PIPE HOSE END CONNECTION: 3/8" MALE FUNCTIONAL DESCRIPTION: US ED FOR DRILLING GAS AND WATER UTILITY TEST HOLES AND FOR SETTING ANCHOR BOLTS GENERAL CHARACTERI STICS: OPEN CENTER; USES SKIL 736 TYPE CARBIDE T IPPED FLUTED DRILLS; INCLUDES HOSE WHIPS UNPACKA GED UNIT WEIGHT: 45 LBS (PARTIAL DESCRIPTION)
    contract · Last action 2014-05-13
    $33,990
  • General Services Administration
    TAS::17 1106::TAS SAW, CIRCULAR, ELECTRIC, PORTABLE; SEE DESCRIPTION IN CONTRACT FILE.
    contract · Last action 2010-03-24
    $33,360
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-04-10
    $32,680
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-10-31
    $32,397
  • General Services Administration
    PRODUCT MANUFACTURED IN USA
    contract · Last action 2011-05-06
    $32,108
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-10-07
    $32,007
  • General Services Administration
    TAS::47 4534 001::TAS PRODUCT MANUFACTURED IN THE USA
    contract · Last action 2010-11-26
    $31,050
  • General Services Administration
    PRODUCT MANUFACTURED IN USA
    contract · Last action 2011-04-06
    $30,219
  • General Services Administration
    ELECTRONIC SYSTEM TOOL KIT; SEE DESCRIPTION IN CONTRACT.
    contract · Last action 2012-04-12
    $30,198
  • General Services Administration
    NUT RUNNER AND SCREWDRIVER, PNEUMATIC: DRIVE END TYPE - MALE SPINDLE WIDTH ACROSS FLATS - 0.500 INCHES DRIVE TYPE: DIRECT HANDLE TYPE: BODY GRIP CAPACITY RATING: 0.375 INCHES DRIVE END SHAPE: SQUARE NO LOAD SPEED: 375 RPM DRIVE FOR WHICH DE SIGNED: ANGULAR ANGLE IN DEGREES: 90 FEATURES: N ON-REVERSIBLE, AIR VOLUME REGULATOR INGERSOLL-RA ND ANGLE WRENCH MODEL 8SQ53G2 CONFORMING TO GENE RAL ELECTRIC DRAWING 157D3317 OR EQUAL. (PARTIAL DESCRIPTION)
    contract · Last action 2013-12-06
    $29,700
  • General Services Administration
    HAMMER DRILL (HYDRAULIC)
    contract · Last action 2016-11-18
    $29,240
  • General Services Administration
    TAS::47 4534 001::TAS CUTTER, BOLT: IAW CID A-A-3047, DATED NOVEMBER 6 1996, AND NOTICE 2, DATED NOVEMBER 30, 2001. CL ASS: 3 (CLIPPER CUT [CLOSE CUTTING]). OVERALL LE NGTH: 36" . CUTTING CAPACITY: 9/16" . (PARTIAL DES CRIPTION)
    contract · Last action 2010-08-03
    $28,760
  • General Services Administration
    HAMMER DRILL (HYDRAULIC)
    contract · Last action 2016-08-23
    $28,440
  • General Services Administration
    HAMMER DRILL, HYDRAULIC: OVERALL LENGTH: 22-1/2 INCHES OVERALL WIDTH: 14 INCHES HANDLE TYPE: STR AIGHT SIDE HOLE DRILLING CAPACITY: 1/2 TO 2 INCH ES DIAMETER X 30 INCHES DEEP RPM: 0 TO 300 PSI P RESSURE: 1500 TO 2000 FLOW RATE: 7 TO 9 GPM MOTO R TYPE: INTERNAL PIPE HOSE END CONNECTION: 3/8 I NCH MALE FUNCTIONAL DESCRIPTION: USED FOR DRILLI NG GAS AND WATER UTILITY TEST HOLES AND FOR SETT ING ANCHOR BOLTS GENERAL CHARACTERISTICS: OPEN C ENTER; USES SKIL 736 TYPE CARBIDE TIPPED FLUTED DRILLS; INCLUDES HOSE WHIPS UNPACKAGED UNIT WEIG HT: 45 LBS (PARTIAL DESCRIPTION)
    contract · Last action 2015-07-23
    $28,440
  • General Services Administration
    WRENCH, SOCKET: IAW FEDERAL SPECIFICATION GGG-W- 644C, DATED 04/30/92. FOR INSTALLING AND REMOVIN G AUTOMOTIVE VEHICLE WHEEL NUTS. TYPE: II (DOUBL E-END TYPE WRENCH). SZ: 9. OVERALL LENGTH: 17" M INIMUM TO 19" MAX. WRENCHING SZS: 1-1/2" HEXAGON AL. 13/16" SQUARE. FEATURE: PROVIDED WITH HANDLE . (EXCEPTIONSAPPLY) (PARTIAL DESCRIPTION)
    contract · Last action 2009-06-18
    $27,108
  • General Services Administration
    ROTARY TOOL KIT, ELECTRIC MSP-2250. PRODUCT IS FROM MEXICO AND IS APPROVED PER PCO.
    contract · Last action 2009-07-15
    $26,111
  • General Services Administration
    TAS::47 4534 001::TAS CUTTER, BOLT. PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER D ETAILS. PRODUCT MANUFACTURED IN POLAND IS ACCEPTABLE.
    contract · Last action 2010-10-11
    $25,852
  • General Services Administration
    TAS::47 4534 001::TAS CUTTER BUNDLE, SCALING AND CHIPPING TOOL: - SEE ATTACHED DOCUMENT FOR DETAIL.
    contract · Last action 2010-10-05
    $25,428
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-10
    $25,100
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-03-07
    $24,966
  • General Services Administration
    PRODUCT MANUFACTURED IN USA
    contract · Last action 2011-06-09
    $24,811
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-10-30
    $24,715
  • General Services Administration
    ROTARY TOOL KIT, ELECTRIC MSP-2250. PRODUCT IS FROM MEXICO AND IS APPROVED PER PCO.
    contract · Last action 2009-08-18
    $23,867
  • Department of Defense
    BANDING
    contract · Last action 2009-04-10
    $23,422
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-06-17
    $23,273
  • General Services Administration
    WRENCH, SOCKET: IAW FEDERAL SPECIFICATION GGG-W- 644C, DATED 04/30/92. FOR INSTALLING AND REMOVIN G AUTOMOTIVE VEHICLE WHEEL NUTS. TYPE: II (DOUBL E-END TYPE WRENCH). SZ: 9. OVERALL LENGTH: 17" M INIMUM TO 19" MAX. WRENCHING SZS: 1-1/2" HEXAGON AL. 13/16" SQUARE. FEATURE: PROVIDED WITH HANDLE . (EXCEPTIONSAPPLY) (PARTIAL DESCRIPTION)
    contract · Last action 2010-03-04
    $22,979
  • General Services Administration
    TAS::47 4534 001::TAS CUTTER, CABLE, HAND OPERATED; MSP; 75. PRODUCT MADE IN USA. PLEASE SEE IPD OR LONG DESCRIPTION FOR FURTHER DETAILS.
    contract · Last action 2010-10-06
    $22,885
  • General Services Administration
    PRODUCT MANUFACTURED IN THE USA
    contract · Last action 2011-05-17
    $22,695
  • General Services Administration
    WRENCH, SOCKET: IAW FEDERAL SPECIFICATION GGG-W- 644C, DATED 04/30/92. FOR INSTALLING AND REMOVIN G AUTOMOTIVE VEHICLE WHEEL NUTS. TYPE: II (DOUBL E-END TYPE WRENCH). SZ: 9. OVERALL LENGTH: 17" M INIMUM TO 19" MAX. WRENCHING SZS: 1-1/2" HEXAGON AL. 13/16" SQUARE. FEATURE: PROVIDED WITH HANDLE . (EXCEPTIONSAPPLY) (PARTIAL DESCRIPTION)
    contract · Last action 2009-08-07
    $22,590
  • General Services Administration
    PRODUCT MANUFACTURED IN THE USA
    contract · Last action 2011-04-06
    $22,321
  • General Services Administration
    HAMMER DRILL (HYDRAULIC)
    contract · Last action 2016-10-20
    $21,930
  • Department of Defense
    NET, DIAMOND MESH SAFETY
    contract · Last action 2010-01-07
    $21,750
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-10-20
    $21,626

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2021-06-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
1994-07-08Complaint4—$0
1975-03-03Planned14—$55

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on N. H. BRAGG AND SONS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is N. H. BRAGG AND SONS's OSHA violation history?
N. H. BRAGG AND SONS has 2 OSHA inspections on record with 18 violations and $55 in total penalties.