Skip to main content

Establishment profile

MICROMETALS/TEXAS, INC.

4825 DERRICK DR, ABILENE, TX, 79601
335999All Other Miscellaneous Electrical Equipment and Component Manufacturing

Download as PDF →

OSHA inspections
3
over 29 years
Violations
10
$4,000 in penalties
Penalties
$4,000
$400 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
1 OSHA follow-up

Summary

MICROMETALS/TEXAS, INC. has accumulated 10 OSHA violations across 3 inspections over 29 years of recorded history, with $4,000 in total assessed penalties.

The establishment sits in the 91st percentile for violations within its industry-state peer group of 113,143 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 13 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MICROMETALS/TEXAS, INC. appears in OSHA workplace safety and WHD wage enforcement records only. No matching records were found in MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
3
0.1 / yr · last 29 yrs
Violations
10
0.3 / yr
Penalties
$4,000
$400 avg / violation
90% serious10% other
Inspection trigger · referral
2 of 3
Inspection trigger · complaint
1 of 3

67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $4,000 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0095 G0611$500Feb 2001Feb 2001
29 CFR 1910.0036 D0211$500Jan 2001Jan 2001
29 CFR 1910.0125 C01 I11$500Jan 2001Jan 2001
5A000111$500Jan 2001Jan 2001
29 CFR 1910.0305 B0111$500Jan 2001Jan 2001
29 CFR 1910.0023 C0111$500Jan 2001Jan 2001
29 CFR 1910.0212 B11$500Jan 2001Jan 2001
29 CFR 1910.0303 B0111$500Jan 2001Jan 2001
29 CFR 1910.0134 C01 III11Feb 2001Feb 2001
29 CFR 1910.0305 G01 I11Jan 2001Jan 2001

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

91st

Worse on violations than most other employers in NAICS 3359 within TX. Peer group: 113,143 employers. This establishment has 10 OSHA violations; peer median is 1.

Fewer violationsMore violations
Penalty percentile
96th
peer median: $0
Inspection frequency
93rd
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for MICROMETALS/TEXAS, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
1.4
BLS SOII 2024
Industry avg DART
0.7
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
1
Referral
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MICROMETALS/TEXAS, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
13 years ago

No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

Cases
1
Back wages owed
$227
Employees affected
5

Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.

Wage and hour breakdown by law

Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 6 violations · $227 in backwages

StatutePeriodCasesViolationsWorkersBackwagesCivil penalty
FLSA — minimum wage & overtimeFeb 2013165$227

Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.

Mine safety (MSHA)

No MSHA mine safety violations on file for MICROMETALS/TEXAS, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for MICROMETALS/TEXAS, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MICROMETALS/TEXAS, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MICROMETALS/TEXAS, INC.. Verify directly with Environmental Protection Agency

In the news

Related searches

About this data

This profile aggregates federal enforcement records on MICROMETALS/TEXAS, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MICROMETALS/TEXAS, INC.'s OSHA violation history?
MICROMETALS/TEXAS, INC. has 3 OSHA inspections on record with 10 violations and $4,000 in total penalties.
How does MICROMETALS/TEXAS, INC.'s safety record compare to its industry?
MICROMETALS/TEXAS, INC. operates in the all other miscellaneous electrical equipment and component manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.4.