Establishment profile
MICRO STAMPING CORP.
140 BELMONT DRIVE, SOMERSET, NJ, 08876
Operated by Micro Stamping Corporation · 1 of 3 establishments
339113 — Surgical Appliance and Supplies Manufacturing
Summary
MICRO STAMPING CORP. has accumulated 4 OSHA violations across 5 inspections over 32 years of recorded history, with $1,725 in total assessed penalties.
The establishment sits in the 49th percentile for violations within its industry-state peer group of 81 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MICRO STAMPING CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
40% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $1,725 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $625 | Jul 1994 | Jul 1994 |
| 29 CFR 1910.1052 C01 | 1 | 1 | $550 | Nov 1999 | Nov 1999 |
| 29 CFR 1910.1052 D01 III | 1 | 1 | $550 | Nov 1999 | Nov 1999 |
| 29 CFR 1910.1052 F01 | 1 | 1 | — | Nov 1999 | Nov 1999 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3391 within NJ. Peer group: 81 employers. This establishment has 4 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 356 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MICRO STAMPING CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MICRO STAMPING CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MICRO STAMPING CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MICRO STAMPING CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MICRO STAMPING CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MICRO STAMPING CORP.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MICRO STAMPING CORP.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-04-09 | Referral | 0 | — | $0 | |
| 2005-03-22 | Follow-up | 0 | — | $0 | |
| 2001-03-02 | Planned | 0 | — | $0 | |
| 1999-07-30 | Complaint | 3 | 1 | $1,100 | |
| 1994-06-07 | Planned | 1 | 1 | $625 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
MICRO STAMPING CORP. is one of 3 establishments rolled up under the parent organization Micro Stamping Corporation.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Micro Stamping Corporation across all 3 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in surgical appliance and supplies manufacturing within NJ, ordered by federal enforcement volume:
- ZIMMER TRABECULAR METAL TECHNOLOGY INC.PARSIPPANY — 3 federal enforcement records
- APPLIED TECH PRODUCTSWEST BERLIN — 1 federal enforcement record
- ZIMMER BIOMET INC.FAIR LAWN — 1 federal enforcement record
- BEACON CONVERTERS INCSADDLE BROOK — 1 federal enforcement record
- PRO SUPPORT SYSTEMSPENNSAUKEN — 1 federal enforcement record
- ZIMMER BIOMETPARSIPPANY — 1 federal enforcement record
- VWR INTERNATIONAL, LLC.BRIDGEPORT — 1 federal enforcement record
- THE MEDTECH GROUP, INC.SOUTH PLAINFIELD — 1 federal enforcement record
- WATER-JEL TECHNOLOGIES, LLCCARLSTADT — 1 federal enforcement record
- KEN-MAR MACHINE MFG. CORP.PATERSON — 1 federal enforcement record
Other locations under this parent
Other establishments operated by Micro Stamping Corporation, ordered by federal enforcement volume:
- MICRO STAMPING CORPORATIONSOMERSET, NJ — 2 federal enforcement records
- MICRO STAMPING CORPMAPLEWOOD, NJ — 1 federal enforcement record
Related searches
- All Micro Stamping Corporation locationsParent rollup
- Surgical Appliance and Supplies ManufacturingAll employers in this industry
- Employers in NJState-wide enforcement data
- Surgical Appliance and in NJIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MICRO STAMPING CORP. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Micro Stamping Corporation, which operates 3 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MICRO STAMPING CORP.'s OSHA violation history?
- MICRO STAMPING CORP. has 5 OSHA inspections on record with 4 violations and $1,725 in total penalties.
- How does MICRO STAMPING CORP.'s safety record compare to its industry?
- MICRO STAMPING CORP. operates in the surgical appliance and supplies manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.9. MICRO STAMPING CORP.'s self-reported DART rate is 3.57 compared to an industry average of 0.9.