Skip to main content

Establishment profile

LINZER PRODUCTS CORP

675 GLENOAKS BOULEVARD, SAN FERNANDO, CA, 91340
Operated by Peoplease · 1 of 36 establishments
339994Broom, Brush, and Mop Manufacturing
EIN 582275794

Download as PDF →

OSHA inspections
3
over 18 years
Violations
16
$46,435 in penalties
Penalties
$46,435
$2,902 avg
Accident investigations on record
1 hospitalizations · 1 OSHA follow-up

Summary

LINZER PRODUCTS CORP has accumulated 16 OSHA violations across 3 inspections over 18 years of recorded history, with $46,435 in total assessed penalties.

The establishment sits in the 95th percentile for violations within its industry-state peer group of 536 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 3 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

LINZER PRODUCTS CORP appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.2 / yr · last 18 yrs
Violations
16
0.9 / yr
Penalties
$46,435
$2,902 avg / violation
44% serious56% other
Inspection trigger · accident
1 of 3
Inspection trigger · planned
1 of 3

100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 16 citations in this view · $46,435 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
3314 C11$18,000Sep 2008Sep 2008
4208(A)11$5,060Aug 2023Aug 2023
342(A)11$5,000Aug 2023Aug 2023
342 A11$5,000Sep 2008Sep 2008
5185 L11$3,375Sep 2010Sep 2010
4070 A11$3,375Sep 2010Sep 2010
29 CFR 2340.0017 A11$3,375Sep 2010Sep 2010
3314 J0111$560Sep 2008Sep 2008
4075 A11$505Sep 2008Sep 2008
4186 B11$505Sep 2008Sep 2008
461 A11$375Sep 2010Sep 2010
3241 A11$375Sep 2010Sep 2010
3210 A11$280Sep 2010Sep 2010
3314 G11$280Sep 2008Sep 2008
3328 D11$185Sep 2010Sep 2010
29 CFR 2340.002411$185Sep 2010Sep 2010

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

95th

Worse on violations than nearly every other employer in NAICS 3399 within CA. Peer group: 536 employers. This establishment has 16 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
99th
peer median: $1,130
Inspection frequency
92nd
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
4.2
vs industry
+2.2
TRIR
12.7
vs industry
+9.9

Reported for 91 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.8
BLS SOII 2024
Industry avg DART
2.0
BLS SOII 2024
Self-reported TRIR
12.7
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Accident
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for LINZER PRODUCTS CORP. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
May 8, 2008AMPUTATED,FINGER,LACERATION,NIP POINT,UNGUARDED11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
3 years ago

No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for LINZER PRODUCTS CORP. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for LINZER PRODUCTS CORP. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for LINZER PRODUCTS CORP. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for LINZER PRODUCTS CORP. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for LINZER PRODUCTS CORP. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for LINZER PRODUCTS CORP. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2023-04-06Unprogrammed Related21$10,060
2010-07-20Planned83$11,525
2008-05-16Accident63$24,850

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

LINZER PRODUCTS CORP is one of 36 establishments rolled up under the parent organization Peoplease.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Peoplease across all 36 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in broom, brush, and mop manufacturing within CA, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Peoplease, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on LINZER PRODUCTS CORP from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Peoplease, which operates 36 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is LINZER PRODUCTS CORP's OSHA violation history?
LINZER PRODUCTS CORP has 3 OSHA inspections on record with 16 violations and $46,435 in total penalties.
How does LINZER PRODUCTS CORP's safety record compare to its industry?
LINZER PRODUCTS CORP operates in the broom, brush, and mop manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. LINZER PRODUCTS CORP's self-reported DART rate is 4.23 compared to an industry average of 2.