Skip to main content

Establishment profile

LINEAL TECHNOLOGIES

3443 AERIAL WAY DRIVE, ROANOKE, VA, 24018
Operated by Lineal Technologies · 1 of 2 establishments
326199All Other Plastics Product Manufacturing
EIN 630400153

Download as PDF →

OSHA inspections
2
over 23 years
Violations
13
$4,375 in penalties
Penalties
$4,375
$337 avg

Summary

LINEAL TECHNOLOGIES has accumulated 13 OSHA violations across 2 inspections over 23 years of recorded history, with $4,375 in total assessed penalties.

The establishment sits in the 81st percentile for violations within its industry-state peer group of 238 employers. Inspection frequency runs at the 47th percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

LINEAL TECHNOLOGIES appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.1 / yr · last 23 yrs
Violations
13
0.6 / yr
Penalties
$4,375
$337 avg / violation
85% serious15% other
Inspection trigger · planned
2 of 2

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 13 distinct standards shown · 13 citations in this view · $4,375 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0305 B0111$700Jul 2003Jul 2003
29 CFR 1910.0147 C04 II11$675Jul 2003Jul 2003
29 CFR 1910.0303 B0211$500Jul 2003Jul 2003
29 CFR 1910.1200 H01 I11$500Jul 2003Jul 2003
29 CFR 1910.0106 E06 II11$500Jul 2003Jul 2003
29 CFR 1910.0212 A0111$500Jul 2003Jul 2003
29 CFR 1910.0151 C11$500Jul 2003Jul 2003
29 CFR 1910.0022 A0211$500Jul 2003Jul 2003
29 CFR 1910.0147 C07 I11Jul 2003Jul 2003
29 CFR 1910.0036 D0211Jul 2003Jul 2003
29 CFR 1910.0133 A0111Jul 2003Jul 2003
29 CFR 1910.0022 A0111Jul 2003Jul 2003
29 CFR 1910.0212 A03 II11Jul 2003Jul 2003

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

81st

Worse on violations than most other employers in NAICS 3261 within VA. Peer group: 238 employers. This establishment has 13 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
68th
peer median: $1,838
Inspection frequency
47th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.6
vs industry
−1.3
TRIR
1.1
vs industry
−1.7

Reported for 177 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.8
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
1.1
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for LINEAL TECHNOLOGIES. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for LINEAL TECHNOLOGIES. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for LINEAL TECHNOLOGIES. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for LINEAL TECHNOLOGIES. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for LINEAL TECHNOLOGIES. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for LINEAL TECHNOLOGIES. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for LINEAL TECHNOLOGIES. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2008-01-03Planned0$0
2003-05-06Planned1311$4,375

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

LINEAL TECHNOLOGIES is one of 2 establishments rolled up under the parent organization Lineal Technologies.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Lineal Technologies across all 2 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in all other plastics product manufacturing within VA, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Lineal Technologies, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on LINEAL TECHNOLOGIES from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Lineal Technologies, which operates 2 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is LINEAL TECHNOLOGIES's OSHA violation history?
LINEAL TECHNOLOGIES has 2 OSHA inspections on record with 13 violations and $4,375 in total penalties.
How does LINEAL TECHNOLOGIES's safety record compare to its industry?
LINEAL TECHNOLOGIES operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. LINEAL TECHNOLOGIES's self-reported DART rate is 0.55 compared to an industry average of 1.8.