Skip to main content
FastDOL

Establishment profile

JDV PRODUCTS INC.

2-05 BANTA PLACE, FAIR LAWN, NJ, 07410

Download as PDF →

OSHA inspections
1
over 29 years
Violations
8
$900 in penalties
Penalties
$900
$113 avg

Summary

JDV PRODUCTS INC. has accumulated 8 OSHA violations across 1 inspection over 29 years of recorded history, with $900 in total assessed penalties.

The establishment sits in the 88th percentile for violations within its industry-state peer group of 69,783 employers. The most recent enforcement activity was recorded 29 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

JDV PRODUCTS INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
1
0.0 / yr · last 29 yrs
Violations
8
0.3 / yr
Penalties
$900
$113 avg / violation
100% serious0% other
Inspection trigger · planned
1 of 1

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 8 distinct standards shown · 8 citations in this view · $900 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0037 Q0111$188Oct 1996Oct 1996
29 CFR 1910.0147 C0111$150Oct 1996Oct 1996
29 CFR 1910.0212 A0111$150Oct 1996Oct 1996
29 CFR 1910.0212 A03 II11$150Oct 1996Oct 1996
29 CFR 1910.0253 B02 II11$150Oct 1996Oct 1996
29 CFR 1910.1200 E0111$113Oct 1996Oct 1996
29 CFR 1910.1200 H0111—Oct 1996Oct 1996
29 CFR 1910.0037 Q0211—Oct 1996Oct 1996

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

88th

Worse on violations than most other employers. Peer group: 69,783 employers. This establishment has 8 OSHA violations; peer median is 1.

Fewer violationsMore violations
Penalty percentile
84th
peer median: $0
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for JDV PRODUCTS INC.. Verify directly with OSHA Injury Tracking Application →

Inspection breakdown

Planned
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for JDV PRODUCTS INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
29 years ago

No federal enforcement activity has been recorded against this establishment in 29+ years. Most recent activity: 29 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for JDV PRODUCTS INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for JDV PRODUCTS INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for JDV PRODUCTS INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for JDV PRODUCTS INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for JDV PRODUCTS INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for JDV PRODUCTS INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$68K
Awards
50
Top agency
Department of the Interior
$64K
Top agencies by obligation (this location)
Department of the Interior$64K
General Services Administration$4K
Department of Veterans Affairs$20.84
Largest awards
  • Department of the Interior
    PARKS REQUIRES HAMMER DRILLS WHICH WILL DRILL THROUGH ROCKS TO USE WHILE WORKING IN THE BACKCOUNTRY FOR REMOTE TRAIL WORK.
    contract · Last action 2011-11-21
    $19,790
  • Department of the Interior
    VESSEL GT-5000 HD ROCK HAMMER GAS DRILLS
    contract · Last action 2013-05-22
    $7,916
  • Department of the Interior
    HAMMER DRILLS
    contract · Last action 2011-05-25
    $7,916
  • Department of the Interior
    HAMMER DRILLS FOR TRAILS CREWS
    contract · Last action 2010-08-09
    $7,904
  • Department of the Interior
    SUPPLY AND DELIVER ROCK BREAKING HAMMER DRILL TO KLONDIKE GOLD RUSH NP, ALASKA
    contract · Last action 2012-08-24
    $4,360
  • Department of the Interior
    GAS POWERED ROCK DRILL FOR TRAILS MAINTENANCE
    contract · Last action 2012-07-25
    $4,197
  • Department of the Interior
    GAS HAMMER DRILL
    contract · Last action 2012-08-08
    $4,158
  • Department of the Interior
    VESSEL ROCK DRILL.
    contract · Last action 2012-06-04
    $4,158
  • Department of the Interior
    RECOVERY SEKI PMIS # 121063 HAMMER DRILL
    contract · Last action 2010-07-01
    $3,889
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT&LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION)
    contract · Last action 2011-11-16
    $581
  • General Services Administration
    TAS::97 4930::TAS UNWRAPPING TOOL: USED TO REMOVE SOLDERLESS WRAPPED CONNECTIONS FROM 24 THRU 32 GAUGE WIRE. TYPEOF UNWRAP: LEFT AND RIGHT HAND. TERMINAL HOLE DIAMETER: 0.038" . TERMINAL HOLE DEPTH: 1.00" . OUTSIDE DIAMETER: 0.093" . FEATURE: DOUBLE ENDED. OKINDUSTRIES INCORPORATED PN UWD93-93 OR EQUAL. (PARTIAL DESCRIPTION) P/N HU93RL < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-11-08
    $387
  • General Services Administration
    WRAPPING TOOL, WIRE: TYPE: WIRE WRAPPING TOOL GENERAL CHARACTERISTICS: PISTOL GRIP; 115 VAC, 60HZ; 4
    contract · Last action 2008-06-19
    $370
  • General Services Administration
    TAS::97 4930::TAS HANDLE, WIRE WRAPPING TOOL: TYPE: HANDLE, WIRE WRAPPING TOOL OVERALL LENGTH: 4-1/2 IN OVERALL DIAMETER: 1/2 IN. END ITEM IDENTIFICATION: COOPERNO. A20557-XX WIRE WRAPPING TOOLS (PARTIAL DESCRIPTION) P/N HH20 < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-10-21
    $345
  • General Services Administration
    WRAPPING TOOL, HAND: TYPE: WRAPPING TOOL, HAND DESIGNED FOR REGULAR WRAPPING OF WIRE GAUGE SZ 30 AWG ON STANDARD 0.025 INCH SQUARE POSTS. TERMINAL HOLE DIAMETER: 0.036INCH TERMINAL HOLE DEPTH: 1.50 INCH OUTSIDE DIAMETER OF BIT: 0.125 INCH. (PARTIAL DESCRIPTION) P/N HSR30
    contract · Last action 2009-06-25
    $212
  • General Services Administration
    TAS::97 4930::TAS WRAPPING TOOL, HAND: TYPE: WRAPPING TOOL, HAND DESIGNED FOR REGULAR WRAPPING OF WIRE GAUGE SZ 30 AWG ON STANDARD 0.025 INCH SQUARE POSTS. TERMINAL HOLE DIAMETER: 0.036INCH TERMINAL HOLE DEPTH: 1.50 INCH OUTSIDE DIAMETER OF BIT: 0.125 INCH. (PARTIAL DESCRIPTION) P/N HSR30
    contract · Last action 2010-07-29
    $109
  • General Services Administration
    BIT, WIRE WRAPPING TOOL: FOR WIRE SZ 30 AWG. TERMINAL HOLE DIAMETER: 0.036" . TERMINAL HOLE DEPTH: 0.750" . FEATURE: FOR MODIFIED WRAP AND COUNTERBORED BIT FACE. OK INDUSTIRES BIT PN SB30MMK ORCOOPER INDUSTRIES WIREWRAP BIT PN 511208. (PARTIAL DESCRIPTION) P/N BM30SI
    contract · Last action 2010-01-29
    $107
  • General Services Administration
    WRAPPING TOOL, HAND: DESIGNED FOR REGULAR WRAPPING OF WIRE GAUGE SZ 30 AWG ON STANDARD 0.025 INCH SQUARE POSTS. TERMINAL HOLE DIAMETER: 0.036 IN. TERMINAL HOLE DEPTH: 1.50 IN. OUTSIDE DIAMETER OF BIT: 0.125 IN. (PARTIAL DESCRIPTION)
    contract · Last action 2012-02-24
    $96
  • General Services Administration
    UNWRAPPING TOOL: USED TO REMOVE SOLDERLESS WRAPPED CONNECTIONS FROM 24 THRU 32 GAUGE WIRE. TYPEOF UNWRAP: LEFT AND RIGHT HAND. TERMINAL HOLE DIAMETER: 0.038" . TERMINAL HOLE DEPTH: 1.00" . OUTSIDE DIAMETER: 0.093" . FEATURE: DOUBLE ENDED. OKINDUSTRIES INCORPORATEDPN UWD93-93 OREQUAL. (PARTIAL DESCRIPTION) P/N HU93RL < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2009-12-11
    $83
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT&LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION) P/N HU93RL<<<<<<<<PLEASE EXPEDITE>>>>>>>>
    contract · Last action 2011-08-12
    $77
  • General Services Administration
    TAS::21 2020::TAS TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION) ********************************************** P/N HU93RL ********************************************** < < < < < < < < < < < < VENDOR PLEASE NOTE > > > > > > > > > > > > > < < PLEASE EXPEDITE SHIPPING THIS ORDER ASAP > > < < TOMORROW 6/30/10 VIA UPS GROUND SERVICE > > > **********************************************
    contract · Last action 2010-06-29
    $77
  • General Services Administration
    TAS::97 4930::TAS HANDLE, WIRE WRAPPING TOOL: TYPE: HANDLE, WIRE WRAPPING TOOL OVERALL LENGTH: 4-1/2 IN OVERALL DIAMETER: 1/2 IN. END ITEM IDENTIFICATION: COOPERNO. A20557-XX WIRE WRAPPING TOOLS (PARTIAL DESCRIPTION) P/N HH20
    contract · Last action 2010-10-21
    $69
  • General Services Administration
    TAS::21 2020::TAS HANDLE, WIRE WRAPPING TOOL: TYPE: HANDLE, WIRE WRAPPING TOOL OVERALL LENGTH: 4-1/2 IN OVERALL DIAMETER: 1/2 IN. END ITEM IDENTIFICATION: (REFERENCE COOPER NO. A20557-XX WIRE WRAPPING TOOLS) (PARTIAL DESCRIPTION) ********************************************** P/N HH20 ********************************************** < < < < < < < < < < < < VENDOR PLEASE NOTE > > > > > > > > > > > > > < < PLEASE EXPEDITE SHIPPING THIS ORDER ASAP > > < < TOMORROW 6/30/10 VIA UPS GROUND SERVICE > > > **********************************************
    contract · Last action 2010-06-29
    $69
  • General Services Administration
    WIRE UNWRAPPING TOO: WIRE UNWRAPPING TOOLUSED TO MAKE LEFT OR RIGHT HAND UNWRAPS. DESIGNED TO BE USED ON WIRE GAUGE SZS28-32 AWG. OVERALL LENGTH: 5-1/2 INCHES; OVERALL LENGTH OF HANDLE: 3-1/8 INCHES; OUTSIDE DIAMETER OF HANDLE: 0.500 INCH; TERMINAL HOLE DIAMETER: 0.040 INCH; TERMINAL HOLE DEPTH: 0.750 INCH; OUTSIDE DIAMETER OF BIT: 0.156 INCH. (PARTIAL DESCRIPTION) P/N HU3
    contract · Last action 2011-02-24
    $66
  • General Services Administration
    UNWRAPPING TOOL, WIRE, LEFT-HAND: DESCRIPTION: F OR 26 TO 32 AWG WIRE TERMINAL HOLE DIAMETER: 0.0 40
    contract · Last action 2007-12-05
    $60
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT&LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION)
    contract · Last action 2012-07-17
    $58
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT&LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDEDIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION)
    contract · Last action 2012-05-03
    $58
  • General Services Administration
    TAS::17 1106::TAS TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION)
    contract · Last action 2010-08-04
    $58
  • General Services Administration
    BIT, WIRE WRAPPING: WIRE GAUGE CAPACITY: 30 AWGTYPE WRAP: MODIFIED TERMINAL HOLE DIAMETER: 0.066
    contract · Last action 2009-02-23
    $55
  • General Services Administration
    TAS::17 1804::TAS WIRE WRAP TOOL: MANUAL WIRE WRAP TOOL CONSISTING OF A HANDLE, BIT AND SLEEVE. FOR WIRE WRAP SZ 26 AWG WIRE-WRAP TYPE: STANDARD TERMINAL HOLE DIAMETER: 0.075 INCH TERMINAL HOLE DEPTH: 1.00 INCH EFFECTIVE RADIUS: 0.1 INCH. (PARTIAL DESCRIPTION) P/N SP42610
    contract · Last action 2010-09-30
    $54
  • General Services Administration
    TAS::17 1804::TAS WIRE WRAP TOOL: MANUAL WIRE WRAP TOOL CONSISTING OF A HANDLE, BIT AND SLEEVE. FOR WIRE WRAP SZ 26 AWG WIRE-WRAP TYPE: STANDARD TERMINAL HOLE DIAMETER: 0.075 INCH TERMINAL HOLE DEPTH: 1.00 INCH EFFECTIVE RADIUS: 0.1 INCH. (PARTIAL DESCRIPTION) P/N SP42610
    contract · Last action 2010-07-29
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION) P/N HU93RL
    contract · Last action 2009-10-12
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION) P/N HU93RL
    contract · Last action 2009-09-23
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2009-02-10
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2009-01-22
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-11-26
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-10-03
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-09-09
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-09-09
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-08-04
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-06-17
    $54
  • General Services Administration
    TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UN WRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPP
    contract · Last action 2008-03-07
    $54
  • General Services Administration
    UNWRAPPING TOOL, WIRE, LEFT-HAND: DESCRIPTION: F OR 26 TO 32 AWG WIRE TERMINAL HOLE DIAMETER: 0.0 40
    contract · Last action 2008-09-17
    $53
  • General Services Administration
    BIT, WIRE WRAPPING: WIRE GAUGE CAPACITY: 30 AWG TYPE WRAP: MODIFIED TERMINAL HOLE DIAMETER: 0.03 6 I
    contract · Last action 2008-03-27
    $51
  • General Services Administration
    WIRE WRAP TOOL: MANUAL WIRE WRAP TOOL CONSISTING OF A HANDLE, BIT AND SLEEVE FOR WIRE WRAP SZ 26 AWG WIRE-WRAP TYPE: STANDARD TERMINAL HOLE DIAMETER: 0.075 INCH TERMINAL HOLE DEPTH: 1.00 INCHEFFECTIVE RADIUS: 0.1 INCH (PARTIAL DESCRIPTION)
    contract · Last action 2011-10-17
    $48
  • General Services Administration
    BIT, WIRE WRAPPING: WIRE GAUGE CAPACITY: 30 AWGTYPE WRAP: MODIFIED TERMINAL HOLE DIAMETER: 0.066
    contract · Last action 2009-02-23
    $27
  • General Services Administration
    TAS::97 4930::TAS WIRE UNWRAPPING TOO: WIRE UNWRAPPING TOOLUSED TO MAKE LEFT OR RIGHT HAND UNWRAPS. DESIGNED TO BE USED ON WIRE GAUGE SZS28-32 AWG. OVERALL LENGTH: 5-1/2 INCHES; OVERALL LENGTH OF HANDLE: 3-1/8 INCHES; OUTSIDE DIAMETER OF HANDLE: 0.500 INCH; TERMINAL HOLE DIAMETER: 0.040 INCH; TERMINAL HOLE DEPTH: 0.750 INCH; OUTSIDE DIAMETER OF BIT: 0.156 INCH. (PARTIAL DESCRIPTION) < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-04-06
    $22
  • General Services Administration
    WIRE UNWRAPPING TOO: WIRE UNWRAPPING TOOLUSED TO MAKE LEFT OR RIGHT HAND UNWRAPS. DESIGNED TO BE USED ON WIRE GAUGE SZS28-32 AWG. OVERALL LENGTH: 5-1/2 INCHES; OVERALL LENGTH OF HANDLE: 3-1/8 INCHES; OUTSIDE DIAMETER OF HANDLE: 0.500 INCH; TERMINAL HOLE DIAMETER: 0.040 INCH; TERMINAL HOLE DEPTH: 0.750 INCH; OUTSIDE DIAMETER OF BIT: 0.156 INCH. (PARTIAL DESCRIPTION) P/N HU3 < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2009-09-29
    $22
  • General Services Administration
    WIRE UNWRAPPING TOO: WIRE UNWRAPPING TOOLUSED TO MAKE LEFT OR RIGHT HAND UNWRAPS. DESIGNED TO BE USED ON WIRE GAUGE SZS28-32 AWG. OVERALL LENGTH: 5-1/2 INCHES; OVERALL LENGTH OF HANDLE: 3-1/8 INCHES; OUTSIDE DIAMETER OF HANDLE: 0.500 INCH; TERMINAL HOLE DIAMETER: 0.040 INCH; TERMINAL HOLE DEPTH: 0.750 INCH; OUTSIDE DIAMETER OF BIT: 0.156 INCH. (PARTIAL DESCRIPTION) P/N HU3 < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2009-09-29
    $22
  • Department of Veterans Affairs
    SCREWDRIVER, PHILIPS
    contract · Last action 2008-02-06
    $21
  • General Services Administration
    TAS::97 4930::TAS TOOL, WIRE UNWRAPPING, HAND: TYPE: TOOL, WIRE UNWRAPPING, HAND DUAL, RIGHT & LEFT-HAND UNWRAPPING TOOL WIRE GAUGE SZ: 26-32 AWG. BODY SHAPE: HEXAGON OVERALL LENGTH: 6.00 INCHES TERMINAL HOLE DIAMETER: 0.040 INCH TERMINAL HOLE DEPTH: 1.00 INCH BIT LENGTH: 3/4 INCH, EACH END OVERALL LENGTH OF HANDLE: 4-1/4 INCHES OUTIDE DIAMETER OF WORKING ENDS: 0.093 INCH (PARTIAL DESCRIPTION) P/N HU93RL < < < < < < < < PLEASE EXPEDITE > > > > > > > >
    contract · Last action 2010-04-01
    $19

Federal contract dollars to this establishment. Primary NAICS: 333991 - POWER-DRIVEN HANDTOOL MANUFACTURING. Last action: 2013-05-22. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
1996-09-20Planned88$900

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on JDV PRODUCTS INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is JDV PRODUCTS INC.'s OSHA violation history?
JDV PRODUCTS INC. has 1 OSHA inspection on record with 8 violations and $900 in total penalties.