Establishment profile
INTERNATIONAL MACHINE & TOOL INC
54 INDUSTRIAL PARK DRIVE, HENDERSONVILLE, TN, 37075
332710 — Machine Shops
Summary
INTERNATIONAL MACHINE & TOOL INC has accumulated 22 OSHA violations across 3 inspections over 17 years of recorded history, with $2,600 in total assessed penalties.
The establishment sits in the 86th percentile for violations within its industry-state peer group of 154 employers. Inspection frequency runs at the 67th percentile. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
INTERNATIONAL MACHINE & TOOL INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $2,600 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0178 A06 | 1 | 1 | $750 | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0215 A01 | 1 | 1 | $750 | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0132 A | 1 | 1 | $600 | Jan 2015 | Jan 2015 |
| 29 CFR 1910.0157 E02 | 1 | 1 | $100 | Nov 2016 | Nov 2016 |
| 29 CFR 1910.0305 G01 IV B | 1 | 1 | $100 | Nov 2016 | Nov 2016 |
| 29 CFR 1910.0305 G01 IV A | 1 | 1 | $100 | Nov 2016 | Nov 2016 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $100 | Nov 2016 | Nov 2016 |
| 29 CFR 1910.0157 C01 | 1 | 1 | $100 | Nov 2016 | Nov 2016 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | — | Nov 2016 | Nov 2016 |
| RULE 800-01-09-.07 | 1 | 1 | — | Jan 2015 | Jan 2015 |
| 29 CFR 1910.0132 D01 | 1 | 1 | — | Jan 2015 | Jan 2015 |
| 29 CFR 1910.0133 A01 | 1 | 1 | — | Jan 2015 | Jan 2015 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | — | Jan 2015 | Jan 2015 |
| 29 CFR 1910.1200 H02 III | 1 | 1 | — | Jan 2015 | Jan 2015 |
| 29 CFR 1910.0178 O02 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0178 M03 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0178 L04 IIA | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1200 G08 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Feb 2009 | Feb 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within TN. Peer group: 154 employers. This establishment has 22 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for INTERNATIONAL MACHINE & TOOL INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for INTERNATIONAL MACHINE & TOOL INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for INTERNATIONAL MACHINE & TOOL INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for INTERNATIONAL MACHINE & TOOL INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for INTERNATIONAL MACHINE & TOOL INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for INTERNATIONAL MACHINE & TOOL INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for INTERNATIONAL MACHINE & TOOL INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for INTERNATIONAL MACHINE & TOOL INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-10-25 | Planned | 6 | — | $500 | |
| 2014-12-18 | Planned | 6 | 3 | $600 | |
| 2009-01-15 | Planned | 10 | 6 | $1,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within TN, ordered by federal enforcement volume:
- CUPPLES' J & J CO., INC.JACKSON — 2 federal enforcement records
- NEWCOMB MACHINE & WELDING CO INCKNOXVILLE — 2 federal enforcement records
- BELLS WELDING & MACHINEHOLLADAY — 2 federal enforcement records
- SOUTHERN MACHINERY COMPANYNASHVILLE — 2 federal enforcement records
- PRECISION ENTERPRISES INCKNOXVILLE — 1 federal enforcement record
- BIBLE'S MACHININGNEWPORT — 1 federal enforcement record
- BRACKINS MACHINE SHOP LLCERWIN — 1 federal enforcement record
- MIKE COLLINSMADISON — 1 federal enforcement record
- BAIRD MACHINE COMPANY INCORPORATEDJOHNSON CITY — 1 federal enforcement record
- DUNLAP MACHINE WORKS INCMEMPHIS — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in TNState-wide enforcement data
- Machine Shops in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on INTERNATIONAL MACHINE & TOOL INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is INTERNATIONAL MACHINE & TOOL INC's OSHA violation history?
- INTERNATIONAL MACHINE & TOOL INC has 3 OSHA inspections on record with 22 violations and $2,600 in total penalties.
- How does INTERNATIONAL MACHINE & TOOL INC's safety record compare to its industry?
- INTERNATIONAL MACHINE & TOOL INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.