Establishment profile
INTEGRATED METAL FINISHING
200 S. 4TH STREET, CONNELLSVILLE, PA, 15425
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
INTEGRATED METAL FINISHING has accumulated 16 OSHA violations across 3 inspections over 21 years of recorded history, with $2,735 in total assessed penalties.
The establishment sits in the 78th percentile for violations within its industry-state peer group of 283 employers. Inspection frequency runs at the 65th percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
INTEGRATED METAL FINISHING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 16 citations in this view · $2,735 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0134 C01 | 1 | 1 | $450 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0134 I07 | 1 | 1 | $450 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $263 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $210 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 B08 | 1 | 1 | $210 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | $210 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 L01 | 1 | 1 | $210 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 L03 I | 1 | 1 | $210 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0184 E01 | 1 | 1 | $210 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 F02 IV | 1 | 1 | $156 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0184 I09 III | 1 | 1 | $156 | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 M01 | 1 | 1 | — | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0178 A04 | 1 | 1 | — | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0179 B05 | 1 | 1 | — | Nov 2004 | Nov 2004 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Nov 2004 | Nov 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3328 within PA. Peer group: 283 employers. This establishment has 16 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for INTEGRATED METAL FINISHING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for INTEGRATED METAL FINISHING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for INTEGRATED METAL FINISHING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for INTEGRATED METAL FINISHING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for INTEGRATED METAL FINISHING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for INTEGRATED METAL FINISHING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for INTEGRATED METAL FINISHING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for INTEGRATED METAL FINISHING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-04-26 | Planned | 0 | — | $0 | |
| 2004-10-28 | Complaint | 14 | 10 | $1,835 | |
| 2004-10-28 | Complaint | 2 | 2 | $900 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within PA, ordered by federal enforcement volume:
- ENVIROSAFE STRIPPING INC.CARNEGIE — 2 federal enforcement records
- AMZ MANUFACTURING CORPORATIONYORK — 2 federal enforcement records
- SHARRETTS PLATING COMPANY, INC.EMIGSVILLE — 2 federal enforcement records
- MILLCREEK METAL FINISHINGERIE — 2 federal enforcement records
- LEADING TECHNOLOGIES, INC.LEECHBURG — 2 federal enforcement records
- AMERICAN TINNING & GALVANIZING COMPANYERIE — 2 federal enforcement records
- KLEIN PLATING WORKS, INC.ERIE — 2 federal enforcement records
- POTTSTOWN PLATING WORKS, INCPOTTSTOWN — 2 federal enforcement records
- WADE TECHNOLOGY, INC.PHILADELPHIA — 2 federal enforcement records
- PHILADELPHIA RUST-PROOF COMPANY, INC.PHILADELPHIA — 2 federal enforcement records
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in PAState-wide enforcement data
- Electroplating, Plating, Polishing, in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on INTEGRATED METAL FINISHING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is INTEGRATED METAL FINISHING's OSHA violation history?
- INTEGRATED METAL FINISHING has 3 OSHA inspections on record with 16 violations and $2,735 in total penalties.
- How does INTEGRATED METAL FINISHING's safety record compare to its industry?
- INTEGRATED METAL FINISHING operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.