Establishment profile
HRANEC SHEET METAL, INC.
763 ROUTE 21, UNIONTOWN, PA, 15401
332322 — Sheet Metal Work Manufacturing
EIN 251758526
Summary
HRANEC SHEET METAL, INC. has accumulated 6 OSHA violations across 3 inspections over 14 years of recorded history, with $12,300 in total assessed penalties.
The establishment sits in the 57th percentile for violations within its industry-state peer group of 979 employers. Inspection frequency runs at the 61st percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HRANEC SHEET METAL, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view · $12,300 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 1 | 1 | $5,500 | May 2024 | May 2024 |
| 29 CFR 1910.0095 D01 | 1 | 1 | $2,275 | May 2012 | May 2012 |
| 29 CFR 1910.0095 G01 | 1 | 1 | $2,275 | May 2012 | May 2012 |
| 29 CFR 1910.0095 K01 | 1 | 1 | $2,250 | May 2012 | May 2012 |
| 29 CFR 1910.0095 L01 | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | May 2012 | May 2012 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3323 within PA. Peer group: 979 employers. This establishment has 6 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 230 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Nov 2023 – Dec 2024
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Dec 6, 2024 | Struck by running powered equipment n.e.c. | Finger or thumb tip(s), nail(s) | Amputation | |
| Nov 13, 2023 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), unspecified | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HRANEC SHEET METAL, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HRANEC SHEET METAL, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HRANEC SHEET METAL, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for HRANEC SHEET METAL, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HRANEC SHEET METAL, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for HRANEC SHEET METAL, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Veterans AffairsPREVENTATIVE MAINTENANCE FOR HVAC SUBJECT FOR AVAIL OF FY 23 FUNDS SOLE SOURCEcontract · Last action 2025-03-14$6,159
Federal contract dollars to this establishment. Primary NAICS: 238220 - PLUMBING, HEATING, AND AIR-CONDITIONING CONTRACTORS. Last action: 2025-03-14. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-03-06 | Planned | 0 | — | $0 | |
| 2023-12-07 | Referral | 1 | 1 | $5,500 | |
| 2011-12-15 | Complaint | 5 | 3 | $6,800 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within PA, ordered by federal enforcement volume:
- LITTLE SHEET METAL, INC.TULLYTOWN — 3 federal enforcement records
- KOTTCAMP SHEET METAL, INCORPORATEDYORK — 3 federal enforcement records
- KEYSTONE CUSTOM FABRICATORS, INC.ELIZABETH — 2 federal enforcement records
- HAZLETON CUSTOM METAL PRODUCTS INC.HAZLETON — 2 federal enforcement records
- PRECISION CUT INDUSTRIES, INCORPORATEDHANOVER — 2 federal enforcement records
- CORRY FABRICATION, LLCCORRY — 2 federal enforcement records
- DENNIS FILGES COMPANY, INC.CHICORA — 2 federal enforcement records
- CURBS PLUS, INC.MOUNT UNION — 2 federal enforcement records
- RADIANT STEEL PRODUCTS COMPANYWILLIAMSPORT — 2 federal enforcement records
- NAPCO INC.VALENCIA — 2 federal enforcement records
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in PAState-wide enforcement data
- Sheet Metal Work in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on HRANEC SHEET METAL, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is HRANEC SHEET METAL, INC.'s OSHA violation history?
- HRANEC SHEET METAL, INC. has 3 OSHA inspections on record with 6 violations and $12,300 in total penalties.
- How does HRANEC SHEET METAL, INC.'s safety record compare to its industry?
- HRANEC SHEET METAL, INC. operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3. HRANEC SHEET METAL, INC.'s self-reported DART rate is 1.38 compared to an industry average of 1.9.