Establishment profile
H & B TOOL & ENGINEERING CO., INC.
481 SULLIVAN AVENUE, SOUTH WINDSOR, CT, 06074
336413 — Other Aircraft Parts and Auxiliary Equipment Manufacturing
Summary
H & B TOOL & ENGINEERING CO., INC. has accumulated 68 OSHA violations across 9 inspections over 39 years of recorded history, with $24,797 in total assessed penalties.
The establishment sits in the 96th percentile for violations within its industry-state peer group of 104 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
H & B TOOL & ENGINEERING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
89% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 33 citations in this view · $24,797 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 5 | 4 | $18,629 | Apr 2003 | Mar 2018 |
| 29 CFR 1910.0219 E03 I | 3 | 3 | — | Mar 1987 | Apr 2003 |
| 29 CFR 1910.0212 A03 II | 2 | 2 | $1,250 | Apr 2003 | Jul 2006 |
| 29 CFR 1910.0242 B | 2 | 2 | $1,050 | Apr 2003 | Feb 2015 |
| 29 CFR 1910.0023 C01 | 2 | 2 | $688 | Apr 2003 | Jul 2006 |
| 29 CFR 1910.0147 C06 IC | 2 | 2 | $550 | Jul 2006 | Mar 2008 |
| 29 CFR 1910.0217 E01 I | 2 | 2 | — | Mar 1987 | Apr 2003 |
| 29 CFR 1910.0215 B09 | 2 | 2 | — | Apr 1997 | Apr 2003 |
| 29 CFR 1910.1200 G02 IV | 2 | 1 | — | Mar 1987 | Mar 1987 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $375 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $375 | Apr 1997 | Apr 1997 |
| 29 CFR 1910.0178 L04 IIB | 1 | 1 | $263 | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0178 A06 | 1 | 1 | $263 | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0303 B01 | 1 | 1 | $263 | Jul 2006 | Jul 2006 |
| 29 CFR 1910.1052 D01 I | 1 | 1 | $213 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.1200 H01 I | 1 | 1 | $188 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0217 B07 VIII | 1 | 1 | $188 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0134 E01 | 1 | 1 | $188 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0215 B08 | 1 | 1 | $159 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $159 | Apr 2003 | Apr 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3364 within CT. Peer group: 104 employers. This establishment has 68 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for H & B TOOL & ENGINEERING CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for H & B TOOL & ENGINEERING CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for H & B TOOL & ENGINEERING CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for H & B TOOL & ENGINEERING CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for H & B TOOL & ENGINEERING CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for H & B TOOL & ENGINEERING CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for H & B TOOL & ENGINEERING CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for H & B TOOL & ENGINEERING CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-02-26 | Planned | 3 | 1 | $15,579 | |
| 2015-01-08 | Planned | 3 | 2 | $3,500 | |
| 2008-01-25 | Follow-up | 1 | — | $200 | |
| 2006-06-27 | Planned | 11 | 11 | $3,175 | |
| 2003-04-15 | Planned | 8 | 5 | $588 | |
| 2003-02-11 | Planned | 15 | 12 | $1,006 | |
| 2002-10-23 | Planned | 0 | — | $0 | |
| 1997-02-28 | Planned | 11 | 5 | $750 | |
| 1987-01-13 | Complaint | 16 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in other aircraft parts and auxiliary equipment manufacturing within CT, ordered by federal enforcement volume:
- PRATT & WHITNEYMIDDLETOWN — 4 federal enforcement records
- UNITED TOOL & DIE COMPANY, INC.WEST HARTFORD — 2 federal enforcement records
- R & D DYNAMICS CORPORATIONBLOOMFIELD — 2 federal enforcement records
- AGC INCORPORATEDMERIDEN — 2 federal enforcement records
- DELL MANUFACTURING COMPANY, INC.FARMINGTON — 2 federal enforcement records
- WHITCRAFT, LLCEASTFORD — 2 federal enforcement records
- MCMELLON BROS., INC.STRATFORD — 1 federal enforcement record
- BRACONE METAL SPINNING, INC.SOUTHINGTON — 1 federal enforcement record
- M & S MACHINE & TOOL CO., INC.WEST HAVEN — 1 federal enforcement record
- W&G MACHINE COMPANYHAMDEN — 1 federal enforcement record
Related searches
- Other Aircraft Parts and Auxiliary Equipment ManufacturingAll employers in this industry
- Employers in CTState-wide enforcement data
- Other Aircraft Parts in CTIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on H & B TOOL & ENGINEERING CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is H & B TOOL & ENGINEERING CO., INC.'s OSHA violation history?
- H & B TOOL & ENGINEERING CO., INC. has 9 OSHA inspections on record with 68 violations and $24,797 in total penalties.
- How does H & B TOOL & ENGINEERING CO., INC.'s safety record compare to its industry?
- H & B TOOL & ENGINEERING CO., INC. operates in the other aircraft parts and auxiliary equipment manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.1.