Establishment profile
GULF COAST REPAIR & MACHINE SHOP, INC.
6802 LEOPARD STREET, CORPUS CHRISTI, TX, 78409
332710 — Machine Shops
EIN 742595565
Summary
GULF COAST REPAIR & MACHINE SHOP, INC. has accumulated 14 OSHA violations across 4 inspections over 9 years of recorded history, with $15,935 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 491 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GULF COAST REPAIR & MACHINE SHOP, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 11 distinct standards shown · 14 citations in this view · $15,935 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0242 B | 2 | 2 | $8,046 | Oct 2017 | Oct 2019 |
| 29 CFR 1910.0134 F02 | 2 | 2 | $2,121 | Sep 2017 | Oct 2019 |
| 29 CFR 1910.0134 K | 2 | 2 | — | Sep 2017 | Oct 2019 |
| 29 CFR 1910.1025 H01 | 1 | 1 | $2,420 | Sep 2017 | Sep 2017 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $1,674 | Sep 2017 | Sep 2017 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $1,674 | Sep 2017 | Sep 2017 |
| 29 CFR 1910.0134 K06 | 1 | 1 | — | Oct 2017 | Oct 2017 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | — | Oct 2017 | Oct 2017 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Sep 2017 | Sep 2017 |
| 29 CFR 1910.1027 K01 | 1 | 1 | — | Sep 2017 | Sep 2017 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Sep 2017 | Sep 2017 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within TX. Peer group: 491 employers. This establishment has 14 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 35 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Nov 2019 – Nov 2022 · 1 in last 5 years
Most frequent event: Fall onto or against object on same level, n.e.c.
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Nov 11, 2022 | Injured by slipping or swinging object held by injured worker | Eye(s) | Hospitalized | |
| Nov 20, 2019 | Fall onto or against object on same level, n.e.c. | Multiple face locations | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GULF COAST REPAIR & MACHINE SHOP, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GULF COAST REPAIR & MACHINE SHOP, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GULF COAST REPAIR & MACHINE SHOP, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GULF COAST REPAIR & MACHINE SHOP, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GULF COAST REPAIR & MACHINE SHOP, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
GULF COAST REPAIR & MACHINE SHOP, INC. 6802 LEOPARD STREET · CORPUS CHRISTI, TX, 78409 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GULF COAST REPAIR & MACHINE SHOP, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2022-11-14 | Referral | 0 | — | $0 | |
| 2019-09-20 | Follow-up | 3 | 2 | $6,365 | |
| 2017-05-16 | Referral | 3 | 2 | $3,802 | |
| 2017-05-09 | Planned | 8 | 7 | $5,768 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within TX, ordered by federal enforcement volume:
- AUTOMATIC PRODUCTS CORP.GARLAND — 3 federal enforcement records
- CATERPILLAR, INC.SAN ANTONIO — 3 federal enforcement records
- S & S MACHINING & FABRICATION, INCGROESBECK — 2 federal enforcement records
- DOOLING MACHINE PRODUCTS, INC.FREEPORT — 2 federal enforcement records
- TEAM INDUSTRIAL SERVICES, INC.HOUSTON — 2 federal enforcement records
- P&N MACHINE CO., INC.HOUSTON — 2 federal enforcement records
- GREAT SOUTHWEST TOOL CO.EL PASO — 2 federal enforcement records
- QUALITY INDUSTRIAL FABRICATION INC.HOUSTON — 2 federal enforcement records
- ARROW MANUFACTURED PRODUCTSWICHITA FALLS — 2 federal enforcement records
- COMMERCE GRINDINGDALLAS — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in TXState-wide enforcement data
- Machine Shops in TXIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GULF COAST REPAIR & MACHINE SHOP, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GULF COAST REPAIR & MACHINE SHOP, INC.'s OSHA violation history?
- GULF COAST REPAIR & MACHINE SHOP, INC. has 4 OSHA inspections on record with 14 violations and $15,935 in total penalties.
- How does GULF COAST REPAIR & MACHINE SHOP, INC.'s safety record compare to its industry?
- GULF COAST REPAIR & MACHINE SHOP, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. GULF COAST REPAIR & MACHINE SHOP, INC.'s self-reported DART rate is 0 compared to an industry average of 1.5.