Establishment profile
GROUP MANUFACTURING SERVICES, INC.
3207 S HARDY DR, TEMPE, AZ, 85282
332322 — Sheet Metal Work Manufacturing
Summary
GROUP MANUFACTURING SERVICES, INC. has accumulated 20 OSHA violations across 12 inspections over 38 years of recorded history, with $4,320 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 238 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GROUP MANUFACTURING SERVICES, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 20 citations in this view · $4,320 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1904.0030 A | 2 | 2 | $800 | Mar 2019 | Mar 2019 |
| 29 CFR 1910.0134 K06 | 1 | 1 | $1,250 | Mar 2019 | Mar 2019 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $750 | Mar 2019 | Mar 2019 |
| 29 CFR 1910.0151 C | 1 | 1 | $750 | Mar 2019 | Mar 2019 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $420 | Jun 1991 | Jun 1991 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $250 | May 1998 | May 1998 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $100 | Jun 1991 | Jun 1991 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | — | Mar 2019 | Mar 2019 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | May 1998 | May 1998 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | May 1998 | May 1998 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.0094 D09 VII | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.0133 A01 | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Aug 1990 | Aug 1990 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | Jun 1988 | Jun 1988 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within AZ. Peer group: 238 employers. This establishment has 20 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 73 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GROUP MANUFACTURING SERVICES, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GROUP MANUFACTURING SERVICES, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GROUP MANUFACTURING SERVICES, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GROUP MANUFACTURING SERVICES, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GROUP MANUFACTURING SERVICES, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GROUP MANUFACTURING SERVICES, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GROUP MANUFACTURING SERVICES, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-09-18 | Planned | 1 | — | $0 | |
| 2018-09-18 | Planned | 2 | 2 | $1,500 | |
| 2018-09-18 | Planned | 2 | 1 | $1,750 | |
| 2018-09-18 | Planned | 1 | — | $300 | |
| 2006-07-03 | Complaint | 1 | — | $0 | |
| 1998-05-27 | Follow-up | 0 | — | $0 | |
| 1998-03-24 | Planned | 3 | 3 | $250 | |
| 1991-12-02 | Follow-up | 0 | — | $0 | |
| 1991-07-16 | Follow-up | 0 | — | $0 | |
| 1991-05-01 | Planned | 2 | 2 | $520 | |
| 1990-06-15 | Planned | 7 | — | $0 | |
| 1988-03-07 | Planned | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within AZ, ordered by federal enforcement volume:
- RUSSELL COIL COYUMA — 3 federal enforcement records
- METAL MANUFACTURING INC.TUCSON — 2 federal enforcement records
- C.G. TECH, INC.PHOENIX — 2 federal enforcement records
- WESTERNER PRODUCTS, INC.TUCSON — 2 federal enforcement records
- DYNAMIC SYSTEMS, INC.CHANDLER — 2 federal enforcement records
- C.O. BOYER METAL COMPANY, INC.FLAGSTAFF — 2 federal enforcement records
- SWISHER HEATING & AIR CONDITIONING, INC.PHOENIX — 2 federal enforcement records
- COMPOSITES USA, INC.PHOENIX — 1 federal enforcement record
- TYPHAN-OMNI, LLCPHOENIX — 1 federal enforcement record
- FINE LINE FABRICATING INC.PHOENIX — 1 federal enforcement record
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in AZState-wide enforcement data
- Sheet Metal Work in AZIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GROUP MANUFACTURING SERVICES, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GROUP MANUFACTURING SERVICES, INC.'s OSHA violation history?
- GROUP MANUFACTURING SERVICES, INC. has 12 OSHA inspections on record with 20 violations and $4,320 in total penalties.
- How does GROUP MANUFACTURING SERVICES, INC.'s safety record compare to its industry?
- GROUP MANUFACTURING SERVICES, INC. operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3. GROUP MANUFACTURING SERVICES, INC.'s self-reported DART rate is 0 compared to an industry average of 1.9.