Establishment profile
G & S MACHINE INC
3708 CHERRY AVE NE, SALEM, OR, 97303
332710 — Machine Shops
Summary
G & S MACHINE INC has accumulated 10 OSHA violations across 2 inspections over 20 years of recorded history, with $615 in total assessed penalties.
The establishment sits in the 71st percentile for violations within its industry-state peer group of 284 employers. Inspection frequency runs at the 46th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
G & S MACHINE INC appears in OSHA workplace safety and UVA Corporate Prosecution Registry records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $615 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0219 D01 | 1 | 1 | $270 | Dec 2005 | Dec 2005 |
| 29 CFR 7020.29003 C | 1 | 1 | $180 | Dec 2005 | Dec 2005 |
| 29 CFR 7010.76501 | 1 | 1 | $165 | Apr 2009 | Apr 2009 |
| 29 CFR 7010.76003 A | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 7010.70014 | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 7020.04201 A | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 1910.0184 I09 IV | 1 | 1 | — | Dec 2005 | Dec 2005 |
| 29 CFR 7020.22801 J | 1 | 1 | — | Dec 2005 | Dec 2005 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Dec 2005 | Dec 2005 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3327 within OR. Peer group: 284 employers. This establishment has 10 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for G & S MACHINE INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for G & S MACHINE INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for G & S MACHINE INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for G & S MACHINE INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for G & S MACHINE INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for G & S MACHINE INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for G & S MACHINE INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
First case: 2000-08-18. Most recent: 2000-08-18. Source: UVA Corporate Prosecution Registry — federal pleas, DPAs, and NPAs.
Federal prosecution case file
Federal corporate prosecution records from the University of Virginia Corporate Prosecution Registry. DPA = Deferred Prosecution Agreement; NPA = Non-Prosecution Agreement; both are pre-trial settlements where the defendant accepts terms but avoids conviction. Monitor = court-appointed compliance oversight, usually 2-5 years. 1 case · 1 plea/conviction · $126,271 in penalties / restitution.
| Case | Date | Disposition | Crime | Jurisdiction | Total payment | Monitor |
|---|---|---|---|---|---|---|
USA v. G&S Mach Co Inc G&S Machine Co. Inc. | Aug 2000 | plea | Other | Wisconsin - Eastern | $126,271 | No |
Source: University of Virginia Corporate Prosecution Registry (maintained by Prof. Brandon L. Garrett, Duke University). The registry has no state or jurisdiction-of-incorporation field on the company side, so same-name employers in different states may mis-attribute -- verify against the source case documents when precision matters.
Federal contracts
This location
- Department of the InteriorSA-CA-GATEScontract · Last action 2011-07-08$18,780
- Department of the InteriorPERMANENT GATES - CASCADES RESOURCE AREAcontract · Last action 2011-08-25$9,885
Federal contract dollars to this establishment. Primary NAICS: 332312 - FABRICATED STRUCTURAL METAL MANUFACTURING. Last action: 2011-08-25. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-03-16 | Planned | 5 | 1 | $165 | |
| 2005-11-29 | Planned | 5 | 2 | $450 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OR, ordered by federal enforcement volume:
- MODERN MACHINERY COMPANY INCEUGENE — 2 federal enforcement records
- ATI CAST PRODUCTS SALEM OPERATIONS LLCSALEM — 2 federal enforcement records
- HANARD MACHINE INCSALEM — 2 federal enforcement records
- MECHANICAL DESIGN INCALBANY — 2 federal enforcement records
- PACIFIC FAB AND MACHINE LLCBAY CITY — 1 federal enforcement record
- TRIAX METAL PRODUCTS LLCBEAVERTON — 1 federal enforcement record
- CHIP STAR TECHNOLOGY LLCBEAVERTON — 1 federal enforcement record
- SOUTHWORTH INCEUGENE — 1 federal enforcement record
- TOP NOTCH MACHINING INCGRESHAM — 1 federal enforcement record
- TJT INCEUGENE — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in ORState-wide enforcement data
- Machine Shops in ORIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on G & S MACHINE INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is G & S MACHINE INC's OSHA violation history?
- G & S MACHINE INC has 2 OSHA inspections on record with 10 violations and $615 in total penalties.
- How does G & S MACHINE INC's safety record compare to its industry?
- G & S MACHINE INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.