Establishment profile
FEDERAL TOOL & ENGINEERING, LLC
N52 W5338 PORTLAND ROAD, CEDARBURG, WI, 53012
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
FEDERAL TOOL & ENGINEERING, LLC has accumulated 15 OSHA violations across 7 inspections over 42 years of recorded history, with $6,588 in total assessed penalties.
The establishment sits in the 87th percentile for violations within its industry-state peer group of 111 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
FEDERAL TOOL & ENGINEERING, LLC appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
57% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within WI. Peer group: 111 employers. This establishment has 15 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
Company-level in WI — for FEDERAL TOOL & ENGINEERING, LLC, not this location alone
National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other FEDERAL TOOL & ENGINEERING, LLC locations in the same state.
NLRB cases
National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 2 cases · 1 ULP · 1 representation
| Case number | Type | Filed | Closed | Status | Region |
|---|---|---|---|---|---|
| 18-CA-356294 | Unfair labor practice | Dec 2024 | Aug 2025 | Closed | Region 18, Minneapolis, Minnesota |
| 18-RC-354175 | Representation election | Nov 2024 | Dec 2024 | Closed | Region 18, Minneapolis, Minnesota |
Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for FEDERAL TOOL & ENGINEERING, LLC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-05-16 | Complaint | 1 | — | $0 | |
| 2006-10-11 | Planned | 5 | 2 | $980 | |
| 2003-08-25 | Referral | 3 | 2 | $2,608 | |
| 2002-07-16 | Planned | 0 | — | $0 | |
| 1994-10-17 | Complaint | 0 | — | $0 | |
| 1994-07-18 | Referral | 6 | 4 | $3,000 | |
| 1984-06-04 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within WI, ordered by federal enforcement volume:
- REICH TOOL & DESIGN, INC.MENOMONEE FALLS — 1 federal enforcement record
- HARMON TOOL & DIE INCWEST BEND — 1 federal enforcement record
- MACHINE INDUSTRIES INCCHIPPEWA FALLS — 1 federal enforcement record
- INDUSTRIAL TOOLCRAFTERS INC.GALESVILLE — 1 federal enforcement record
- FASTRAC INTERNATIONAL CORPORATIONWEST BEND — 1 federal enforcement record
- MILLER TOOL & DIE CO., INC.MAYVILLE — 1 federal enforcement record
- COLE TOOL & MANUFACTURING CO.WEST BEND — 1 federal enforcement record
- UNIPUNCH PRODUCTS, INC.CLEAR LAKE — 1 federal enforcement record
- FOX VALLEY TOOL & DIE INC.KAUKAUNA — 1 federal enforcement record
- ALLIED DIES, INCCHIPPEWA FALLS — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in WIState-wide enforcement data
- Special Die and in WIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on FEDERAL TOOL & ENGINEERING, LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is FEDERAL TOOL & ENGINEERING, LLC's OSHA violation history?
- FEDERAL TOOL & ENGINEERING, LLC has 7 OSHA inspections on record with 15 violations and $6,587.5 in total penalties.
- How does FEDERAL TOOL & ENGINEERING, LLC's safety record compare to its industry?
- FEDERAL TOOL & ENGINEERING, LLC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.