Skip to main content

Establishment profile

FABCO METAL PRODUCTS, LLC

1490 FRANCES DRIVE, DAYTONA BEACH, FL, 32124
Operated by Fabco metal
332312Fabricated Structural Metal Manufacturing
EIN 201051495

Download as PDF →

OSHA inspections
6
over 18 years
Violations
15
$5,450 in penalties
Penalties
$5,450
$363 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
5 National Emphasis Program inspections

Summary

FABCO METAL PRODUCTS, LLC has accumulated 15 OSHA violations across 6 inspections over 18 years of recorded history, with $5,450 in total assessed penalties.

The establishment sits in the 89th percentile for violations within its industry-state peer group of 699 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 11 months ago.

Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.

Agency coverage

FABCO METAL PRODUCTS, LLC appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
6
0.3 / yr · last 18 yrs
Violations
15
0.8 / yr
Penalties
$5,450
$363 avg / violation
33% serious67% other
Inspection trigger · planned
5 of 6
Inspection trigger · complaint
1 of 6

83% of inspections at this establishment produced violations,

Peer comparison

89th

Worse on violations than most other employers in NAICS 3323 within FL. Peer group: 699 employers. This establishment has 15 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
71st
peer median: $1,663
Inspection frequency
97th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
1.9
vs industry
+0.1
TRIR
2.9
vs industry
−0.5

Reported for 94 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
2.9
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Nov 2019

Reports
1
Hospitalizations
1
Amputations
0
Eye losses
0

Most frequent event: Fall on same level due to tripping over an object

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Nov 18, 2019Fall on same level due to tripping over an objectThigh(s)Hospitalized

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
11 months ago

Most recent federal enforcement activity recorded 11 months ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for FABCO METAL PRODUCTS, LLC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for FABCO METAL PRODUCTS, LLC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for FABCO METAL PRODUCTS, LLC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for FABCO METAL PRODUCTS, LLC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

EPA inspections
2
Quarters non-compliant
4
Formal actions
1

EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.

Motor carrier safety (FMCSA)

DOT number
824318
Operation
C

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for FABCO METAL PRODUCTS, LLC. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2025-06-10Planned1$0
2025-03-26Planned1$830
2021-10-04Complaint0$0
2020-01-07Planned1$0
2013-11-07Planned95$4,620
2008-01-28Planned3$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

FABCO METAL PRODUCTS, LLC is one of 1 establishments rolled up under the parent organization Fabco metal.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Fabco metal across all 1 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within FL, ordered by federal enforcement volume:

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on FABCO METAL PRODUCTS, LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Fabco metal.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is FABCO METAL PRODUCTS, LLC's OSHA violation history?
FABCO METAL PRODUCTS, LLC has 6 OSHA inspections on record with 15 violations and $5,449.8 in total penalties.
How does FABCO METAL PRODUCTS, LLC's safety record compare to its industry?
FABCO METAL PRODUCTS, LLC operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4. FABCO METAL PRODUCTS, LLC's self-reported DART rate is 1.94 compared to an industry average of 1.8.