Establishment profile
DUNCAN'S WELDING & CORRECTION EQUIPMENT
INGLESIDE RD., PRINCETON, WV, 24740
Summary
DUNCAN'S WELDING & CORRECTION EQUIPMENT has accumulated 37 OSHA violations across 1 inspection over 37 years of recorded history, with $2,610 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 13,528 employers. The most recent enforcement activity was recorded 37 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DUNCAN'S WELDING & CORRECTION EQUIPMENT appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $2,610 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 2 | 1 | $315 | May 1989 | May 1989 |
| 29 CFR 1910.0212 A01 | 2 | 1 | $270 | May 1989 | May 1989 |
| 29 CFR 1910.0145 C03 | 2 | 1 | — | May 1989 | May 1989 |
| 29 CFR 1910.0106 B02 IIIA | 1 | 1 | $225 | May 1989 | May 1989 |
| 29 CFR 1910.0252 A05 IIIB | 1 | 1 | $225 | May 1989 | May 1989 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $180 | May 1989 | May 1989 |
| 29 CFR 1910.0107 B01 | 1 | 1 | $180 | May 1989 | May 1989 |
| 29 CFR 1910.0022 D01 | 1 | 1 | $180 | May 1989 | May 1989 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $180 | May 1989 | May 1989 |
| 29 CFR 1910.0307 B | 1 | 1 | $180 | May 1989 | May 1989 |
| 29 CFR 1910.0107 C02 | 1 | 1 | $180 | May 1989 | May 1989 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $135 | May 1989 | May 1989 |
| 29 CFR 1910.0303 F | 1 | 1 | $90 | May 1989 | May 1989 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | $90 | May 1989 | May 1989 |
| 29 CFR 1903.0002 A01 | 1 | 1 | $60 | May 1989 | May 1989 |
| 29 CFR 1904.0002 A | 1 | 1 | $60 | May 1989 | May 1989 |
| 29 CFR 1904.0002 B02 | 1 | 1 | $60 | May 1989 | May 1989 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | May 1989 | May 1989 |
| 29 CFR 1910.0157 E03 | 1 | 1 | — | May 1989 | May 1989 |
| 29 CFR 1910.0151 B | 1 | 1 | — | May 1989 | May 1989 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 13,528 employers. This establishment has 37 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 37+ years. Most recent activity: 37 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DUNCAN'S WELDING & CORRECTION EQUIPMENT. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1989-04-14 | Planned | 37 | 18 | $2,610 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in WVState-wide enforcement data
About this data
This profile aggregates federal enforcement records on DUNCAN'S WELDING & CORRECTION EQUIPMENT from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DUNCAN'S WELDING & CORRECTION EQUIPMENT's OSHA violation history?
- DUNCAN'S WELDING & CORRECTION EQUIPMENT has 1 OSHA inspection on record with 37 violations and $2,610 in total penalties.