Establishment profile
DEWITT PLASTICS, INC.
28 AURELIUS AVE., AUBURN, NY, 13021
326199 — All Other Plastics Product Manufacturing
Summary
DEWITT PLASTICS, INC. has accumulated 11 OSHA violations across 1 inspection over 18 years of recorded history, with $1,000 in total assessed penalties.
The establishment sits in the 67th percentile for violations within its industry-state peer group of 390 employers. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DEWITT PLASTICS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Peer comparison
Above average violations in NAICS 3261 within NY. Peer group: 390 employers. This establishment has 11 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DEWITT PLASTICS, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DEWITT PLASTICS, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DEWITT PLASTICS, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DEWITT PLASTICS, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DEWITT PLASTICS, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for DEWITT PLASTICS, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DEWITT PLASTICS, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DEWITT PLASTICS, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- General Services AdministrationDESCR N.A.contract · Last action 2008-06-23$419
- General Services AdministrationDESCR N.A.contract · Last action 2008-07-22$192
- General Services AdministrationBOX, SMALL PARTS: INSIDE LENGTH 4.375 INCHES NOM INAL INSIDE WIDTH 2.625 INCHES NOMINAL INSIDE DE PTH 1.062 INCHES NOMINAL EXTERIOR/INTERIOR COLOR ANY ACCEPTABLE ASSEMBLY FORM SET-UP ASSEMBLY ME THOD ANY ACCEPTABLE STACKING FEATURE NO CLOSURE METHOD HINGED COVER COMPARTMENT LENGTH 2.187 INC HES COMPARTMENT WIDTH 1.250 INCHES COMPARTMENT Q UANTITY 4 MATERIAL PLASTIC STYLE DESIGNATOR SMOO TH CONTOUR GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2012-01-20$70
- General Services AdministrationBOX,PLSTIC,SMALL PARTS: INSIDE DIMS, 4-3/8" L, 2-5/8" W, 1-1/16" D; 4 COMPARTMENTS, 2-3/16" L, 1-1/4" W; HINGED COVER, LOCATED ON LENGTH; WITH 2 MOUNTING HOLES, 3/16" DIAMETER SPACED 3-1/2" CENT ER TO CENTER, 3/8" FROM BOTTOM. PART NUMBER C2723-BGSA PACKED 36 BOXES PER CASE CUSTOMERS MUST ORDER IN MULTIPLES OF 36 GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2011-12-16$70
- General Services AdministrationBOX,PLSTIC,SMALL PARTS: INSIDE DIMS, 4-3/8" L, 2-5/8" W, 1-1/16" D; 4 COMPARTMENTS, 2-3/16" L, 1-1/4" W; HINGED COVER, LOCATED ON LENGTH; WITH 2 MOUNTING HOLES, 3/16" DIAMETER SPACED 3-1/2" CENT ER TO CENTER, 3/8" FROM BOTTOM. PART NUMBER C2723-BGSA PACKED 36 BOXES PER CASE CUSTOMERS MUST ORDER IN MULTIPLES OF 36 GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2011-07-04$70
- General Services AdministrationTAS::97 4930::TAS BOX,PLSTIC,SMALL PARTS: INSIDE DIMS, 4-3/8" L, 2-5/8" W, 1-1/16" D; 4 COMPARTMENTS, 2-3/16" L, 1-1/4" W; HINGED COVER, LOCATED ON LENGTH; WITH 2 MOUNTING HOLES, 3/16" DIAMETER SPACED 3-1/2" CENT ER TO CENTER, 3/8" FROM BOTTOM. PART NUMBER C2723-BGSA GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-11-04$70
- General Services AdministrationTAS::97 4930::TAS BOX,PLSTIC,SMALL PARTS: INSIDE DIMS, 4-3/8" L, 2-5/8" W, 1-1/16" D; 4 COMPARTMENTS, 2-3/16" L, 1-1/4" W; HINGED COVER, LOCATED ON LENGTH; WITH 2 MOUNTING HOLES, 3/16" DIAMETER SPACED 3-1/2" CENT ER TO CENTER, 3/8" FROM BOTTOM. PART NUMBER C2723-BGSA PACKED 36 BOXES PER CASE GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-10-27$70
- General Services AdministrationTAS::97 4930::TAS BOX,PLSTIC,SMALL PARTS: INSIDE DIMS, 4-3/8" L, 2-5/8" W, 1-1/16" D; 4 COMPARTMENTS, 2-3/16" L, 1-1/4" W; HINGED COVER, LOCATED ON LENGTH; WITH 2 MOUNTING HOLES, 3/16" DIAMETER SPACED 3-1/2" CENT ER TO CENTER, 3/8" FROM BOTTOM. PART NUMBER C2723-BGSA GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-10-14$70
- General Services AdministrationTAS::97 4930::TAS BOX,PLSTIC,SMALL PARTS: INSIDE DIMS, 4-3/8" L, 2-5/8" W, 1-1/16" D; 4 COMPARTMENTS, 2-3/16" L, 1-1/4" W; HINGED COVER, LOCATED ON LENGTH; WITH 2 MOUNTING HOLES, 3/16" DIAMETER SPACED 3-1/2" CENT ER TO CENTER, 3/8" FROM BOTTOM. PART NUMBER C2723-BGSA PACKED 36 BOXES PER CASE CUSTOMERS MUST ORDER IN MULTIPLES OF 36 GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-06-22$70
- General Services AdministrationBOX,PLSTIC,SMALL PARTS: PART NUMBER C2723-BGSA GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-01-21$70
- General Services AdministrationDESCR N.A.contract · Last action 2009-04-03$70
- General Services AdministrationDESCR N.A.contract · Last action 2008-08-22$70
- General Services AdministrationDESCR N.A.contract · Last action 2008-01-08$70
- General Services AdministrationDESCR N.A.contract · Last action 2008-01-07$70
- General Services AdministrationBOX, SMALL PARTS: I.A.W. P/N: 46 FROM RPM INDUST RIES INC. OR, COMMERCIAL EQUIVALENT DIMENSIONS: INSIDE WIDTH - 4.062" NOMINAL INSIDE LENGTH - 7. 125" NOMINAL INSIDE DEPTH - 1.187" NOMINAL INTER IOR COLOR - ANY ACCEPTABLE EXTERIOR COLOR - ANY ACCEPTABLE ASSEMBLY FORM - SET-UP ASSEMBLY METHO D - ANY ACCEPTABLE CLOSURE METHOD - HINGED COVER COMPARTMENT QUANTITY - 5 COMPARTMENTS COMPARTME NT SZ: 2.031" L X 1.250" W (2 COMPARTMENTS) 4.31 2" L X 1.500" W (2 COMPARTMENTS) 7.125" L X 2.03 1" W (1 COMPARTMENT) STACKING FEATURE - NOT REQU IRED MATERIAL - PLASTIC STYLE DESIGNATOR - SMOOT H CONTOUR (PARTIAL DESCRIPTION)contract · Last action 2011-10-05$32
- General Services AdministrationTAS::21 2020::TAS BOX, SMALL PARTS: INSIDE WIDTH - 4.062" NOMINAL INSIDE LENGTH - 7. 125" NOMINAL INSIDE DEPTH - 1.187" NOMINAL INTER IOR COLOR - ANY ACCEPTABLE EXTERIOR COLOR - ANY ACCEPTABLE ASSEMBLY FORM - SET-UP ASSEMBLY METHO D - ANY ACCEPTABLE CLOSURE METHOD - HINGED COVER COMPARTMENT QUANTITY - 5 COMPARTMENTS COMPARTME NT SZ: 2.031" L X 1.250" W (2 COMPARTMENTS) 4.31 2" L X 1.500" W (2 COMPARTMENTS) 7.125" L X 2.03 1" W (1 COMPARTMENT) STACKING FEATURE - NOT REQU IRED MATERIAL - PLASTIC STYLE DESIGNATOR - SMOOT H CONTOUR GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-05-04$32
- General Services AdministrationTAS::97 4930::TAS BOX, SMALL PARTS: GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-03-25$32
- General Services AdministrationBOX, SMALL PARTS: I.A.W. P/N: 46 GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-01-25$32
- General Services AdministrationBOX, SMALL PARTS: I.A.W. P/N: 46 FROM RPM INDUST RIES INC. OR, COMMERCIAL EQUIVALENT DIMENSIONS: INSIDE WIDTH - 4.062" NOMINAL INSIDE LENGTH - 7. 125" NOMINAL INSIDE DEPTH - 1.187" NOMINAL INTER IOR COLOR - ANY ACCEPTABLE EXTERIOR COLOR - ANY ACCEPTABLE ASSEMBLY FORM - SET-UP ASSEMBLY METHO D - ANY ACCEPTABLE CLOSURE METHOD - HINGED COVER COMPARTMENT QUANTITY - 5 COMPARTMENTS COMPARTME NT SZ: 2.031" L X 1.250" W (2 COMPARTMENTS) 4.31 2" L X 1.500" W (2 COMPARTMENTS) 7.125" L X 2.03 1" W (1 COMPARTMENT) STACKING FEATURE - NOT REQU IRED MATERIAL - PLASTIC STYLE DESIGNATOR - SMOOT H CONTOUR GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2011-08-12$16
- General Services AdministrationBOX, SMALL PARTS: I.A.W. P/N: DIMENSIONS: WIDTH - 4.062" LENGTH - 7.125" DEPTH - 1.187" INTERIOR COLOR - ANY ACCEPTABLE EXTERIOR COLOR - ANY ACCEPTABLE ASSEMBLY FORM - SET-UP ASSEMBLY METHOD - ANY ACCEPTABLE CLOSURE METHOD - HINGED COVER COMPARTMENT QUANTITY - 5 COMPARTMENT SZ: 2.031" L X 1.250" W (2 COMPARTMENTS) 4.312" L X 1.500" W (2 COMPARTMENTS) 7.125" L X 2.03 1" W (1 COMPARTMENT) STACKING FEATURE - NOT REQU IRED MATERIAL - PLASTIC STYLE DESIGNATOR - SMOOTH CONTOUR GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2011-04-28$16
- General Services AdministrationTAS::21 2020::TAS BOX, SMALL PARTS: GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-09-15$16
- General Services AdministrationTAS::97 4930::TAS BOX, SMALL PARTS: I.A.W. P/N: 46 GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-07-26$16
- General Services AdministrationTAS::97 4930::TAS BOX, SMALL PARTS: GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-03-18$16
- General Services AdministrationBOX, SMALL PARTS: GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-02-23$16
- General Services AdministrationBOX, SMALL PARTS: GSA BUYER: SUSAN KEMPLER (212) 264-7180contract · Last action 2010-02-23$16
- General Services AdministrationDESCR N.A.contract · Last action 2009-03-18$16
- General Services AdministrationDESCR N.A.contract · Last action 2009-03-09$16
- General Services AdministrationDESCR N.A.contract · Last action 2009-02-09$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-12-12$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-11-12$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-08-22$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-05-15$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-05-07$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-01-30$16
- General Services AdministrationDESCR N.A.contract · Last action 2008-01-16$16
Federal contract dollars to this establishment. Primary NAICS: 326199 - ALL OTHER PLASTICS PRODUCT MANUFACTURING. Last action: 2012-01-20. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-10-18 | Planned | 11 | 8 | $1,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other plastics product manufacturing within NY, ordered by federal enforcement volume:
- PACTIV CORPORATIONCANANDAIGUA — 4 federal enforcement records
- CRYSTAL WINDOW & DOOR SYSTEMS, LTD.FLUSHING — 2 federal enforcement records
- ALLSAFE TECHNOLOGIES INC.AMHERST — 2 federal enforcement records
- NALGE NUNC INTERNATIONALROCHESTER — 2 federal enforcement records
- SCHLEGEL SYSTEMS INC.ROCHESTER — 2 federal enforcement records
- 3M TONAWANDATONAWANDA — 2 federal enforcement records
- TULIP MOLDED PLASTICS CORPORATIONNIAGARA FALLS — 2 federal enforcement records
- NEW DIMENSIONS RESEARCH CORP.MELVILLE — 2 federal enforcement records
- VAN BLARCOM CLOSURES, INC.BROOKLYN — 2 federal enforcement records
- TULIP CORPORATIONNIAGARA FALLS — 2 federal enforcement records
Related searches
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- All Other Plastics in NYIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on DEWITT PLASTICS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is DEWITT PLASTICS, INC.'s OSHA violation history?
- DEWITT PLASTICS, INC. has 1 OSHA inspection on record with 11 violations and $1,000 in total penalties.
- How does DEWITT PLASTICS, INC.'s safety record compare to its industry?
- DEWITT PLASTICS, INC. operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.