Establishment profile
D & J MACHINERY, INC.
728 E. TRINIDAD AVE., CLEWISTON, FL, 33440
332710 — Machine Shops
Summary
D & J MACHINERY, INC. has accumulated 34 OSHA violations across 5 inspections over 20 years of recorded history, with $14,850 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 243 employers. Inspection frequency runs at the 96th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
D & J MACHINERY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $14,850 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 B09 | 3 | 3 | $1,814 | Mar 2006 | Sep 2012 |
| 29 CFR 1910.0215 A04 | 2 | 2 | $1,215 | Mar 2006 | Sep 2012 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $1,012 | Mar 2006 | Sep 2009 |
| 29 CFR 1910.0178 L01 I | 2 | 2 | $788 | Mar 2006 | Sep 2009 |
| 29 CFR 1910.0023 E01 | 1 | 1 | $1,428 | Sep 2012 | Sep 2012 |
| 29 CFR 1910.0179 J02 | 1 | 1 | $1,400 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0179 L03 III | 1 | 1 | $1,400 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,000 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0022 A02 | 1 | 1 | $1,000 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0134 I07 | 1 | 1 | $1,000 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0101 B | 1 | 1 | $800 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0107 C08 | 1 | 1 | $800 | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0106 E02 IIB2 | 1 | 1 | $600 | Jan 2010 | Jan 2010 |
| 29 CFR 1904.0029 A | 1 | 1 | $225 | Sep 2009 | Sep 2009 |
| 5A0001 | 1 | 1 | $225 | Mar 2006 | Mar 2006 |
| 29 CFR 1910.0305 B02 | 1 | 1 | $143 | Mar 2006 | Mar 2006 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | — | Sep 2012 | Sep 2012 |
| 29 CFR 1910.0134 K03 | 1 | 1 | — | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0134 F01 | 1 | 1 | — | Jan 2010 | Jan 2010 |
| 29 CFR 1910.0179 M01 | 1 | 1 | — | Jan 2010 | Jan 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within FL. Peer group: 243 employers. This establishment has 34 OSHA violations; peer median is 0.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 32 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2025
Most frequent event: Injured by object held or wielded by person
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 25, 2025 | Injured by object held or wielded by person | Eye(s) | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for D & J MACHINERY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for D & J MACHINERY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for D & J MACHINERY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for D & J MACHINERY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for D & J MACHINERY, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for D & J MACHINERY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseREPAIR FLOOD CONTROL SYSTEM HOMESTEAD ARB FLcontract · Last action 2013-07-18$5,403,690
- Department of DefenseIGF::CT::IGF CONCRETE STRUCTURES IGF::CT::IGFcontract · Last action 2023-03-22$3,057,644
- Department of DefenseS-11-A GEARBOX 1 REPAIRcontract · Last action 2023-06-02$15,800
Federal contract dollars to this establishment. Primary NAICS: 238210 - ELECTRICAL CONTRACTORS AND OTHER WIRING INSTALLATION CONTRACTORS. Last action: 2023-06-02. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-09-12 | Planned | 4 | 3 | $3,570 | |
| 2009-11-04 | Complaint | 17 | 11 | $8,600 | |
| 2009-11-04 | Follow-up | 0 | — | $0 | |
| 2009-08-11 | Complaint | 5 | 2 | $1,800 | |
| 2006-02-15 | Planned | 8 | 5 | $880 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within FL, ordered by federal enforcement volume:
- RING POWER CORPORATIONSAINT AUGUSTINE — 3 federal enforcement records
- PALM BEACH IRON WORKS, INC.WEST PALM BEACH — 2 federal enforcement records
- MEDLEY MACHINE SHOP INC.MEDLEY — 2 federal enforcement records
- JC MACHINE INC.LAKELAND — 2 federal enforcement records
- FORT WALTON MACHINING, INC.FORT WALTON BEACH — 2 federal enforcement records
- ANDRITZ, INCOLDSMAR — 1 federal enforcement record
- ANCHOR MACHINE & FABRICATING, INC.TAMPA — 1 federal enforcement record
- TRC JAX, LLCJACKSONVILLE — 1 federal enforcement record
- C.A. PRECISION, INC.FORT LAUDERDALE — 1 federal enforcement record
- CRESTVIEW AUTOMOTIVE MACHINE SHOP, INCCRESTVIEW — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in FLState-wide enforcement data
- Machine Shops in FLIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on D & J MACHINERY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is D & J MACHINERY, INC.'s OSHA violation history?
- D & J MACHINERY, INC. has 5 OSHA inspections on record with 34 violations and $14,850 in total penalties.
- How does D & J MACHINERY, INC.'s safety record compare to its industry?
- D & J MACHINERY, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. D & J MACHINERY, INC.'s self-reported DART rate is 8.75 compared to an industry average of 1.5.