Establishment profile
CS TOOL ENGINEERING INC
251 W CHERRY ST, CEDAR SPRINGS, MI, 49319
333511 — Industrial Mold Manufacturing
Summary
CS TOOL ENGINEERING INC has accumulated 41 OSHA violations across 5 inspections over 36 years of recorded history, with $3,995 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 1,099 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CS TOOL ENGINEERING INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $3,995 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 4081.331201 | 3 | 3 | $600 | May 1990 | Mar 2006 |
| 29 CFR 1910.0147 C04 I | 2 | 2 | $750 | Oct 1994 | Dec 2011 |
| 29 CFR 1910.1200 G01 | 2 | 2 | — | May 1990 | Dec 2011 |
| 29 CFR 4081.003601 | 2 | 2 | — | May 1990 | Mar 2006 |
| 29 CFR 4081.400602 | 1 | 1 | $800 | Oct 1994 | Oct 1994 |
| 29 CFR 1910.0147 C07 IA | 1 | 1 | $800 | Oct 1994 | Oct 1994 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $350 | Oct 1994 | Oct 1994 |
| 29 CFR 4081.003407 | 1 | 1 | $240 | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $225 | Dec 2011 | Dec 2011 |
| 29 CFR 4081.0716 | 1 | 1 | $180 | Dec 2011 | Dec 2011 |
| 29 CFR 4082.231101 | 1 | 1 | $50 | May 1990 | May 1990 |
| 29 CFR 1910.0303 B07 IV | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0303 F01 | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 4082.212904 | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0106 E09 III | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.1200 F05 | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 4081.003303 | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0304 G06 VIC1 | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0304 G05 | 1 | 1 | — | Dec 2011 | Dec 2011 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within MI. Peer group: 1,099 employers. This establishment has 41 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 45 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CS TOOL ENGINEERING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CS TOOL ENGINEERING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CS TOOL ENGINEERING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CS TOOL ENGINEERING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CS TOOL ENGINEERING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CS TOOL ENGINEERING INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CS TOOL ENGINEERING INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-10-19 | Planned | 16 | 4 | $945 | |
| 2006-02-02 | Planned | 3 | 1 | $150 | |
| 1996-02-23 | Follow-up | 0 | — | $0 | |
| 1994-08-30 | Planned | 9 | 4 | $2,850 | |
| 1990-03-15 | Planned | 13 | — | $50 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in industrial mold manufacturing within MI, ordered by federal enforcement volume:
- URGENT DESIGN & MFGLAPEER — 2 federal enforcement records
- AGGRESSIVE TOOLING INCGREENVILLE — 2 federal enforcement records
- MACH MOLD INCBENTON HARBOR — 2 federal enforcement records
- LOUCA MOLD & AEROSPACE MACHINING, INCAUBURN HILLS — 2 federal enforcement records
- CENTURY TOOL & GAGE COTAYLOR — 2 federal enforcement records
- CENTURY TOOL & GAGE COFENTON — 2 federal enforcement records
- COBRA PATTERNS & MODELS INCMADISON HEIGHTS — 2 federal enforcement records
- SPECIAL MOLD ENGINEERING INCROCHESTER HILLS — 2 federal enforcement records
- MODELS & TOOLS INCTROY — 2 federal enforcement records
- D & F MOLDBRIDGMAN — 1 federal enforcement record
Related searches
- Industrial Mold ManufacturingAll employers in this industry
- Employers in MIState-wide enforcement data
- Industrial Mold Manufacturing in MIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CS TOOL ENGINEERING INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CS TOOL ENGINEERING INC's OSHA violation history?
- CS TOOL ENGINEERING INC has 5 OSHA inspections on record with 41 violations and $3,995 in total penalties.
- How does CS TOOL ENGINEERING INC's safety record compare to its industry?
- CS TOOL ENGINEERING INC operates in the industrial mold manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1. CS TOOL ENGINEERING INC's self-reported DART rate is 0 compared to an industry average of 1.6.