Skip to main content

Establishment profile

CRYSTAL FINISHING SYSTEMS, INC.

333 TROY ST., RIVER FALLS, WI, 54022
Operated by Crystal Finishing Systems, Inc · 1 of 3 establishments
332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Download as PDF →

OSHA inspections
2
over 13 years
Violations
19
$25,540 in penalties
Penalties
$25,540
$1,344 avg

Summary

CRYSTAL FINISHING SYSTEMS, INC. has accumulated 19 OSHA violations across 2 inspections over 13 years of recorded history, with $25,540 in total assessed penalties.

The establishment sits in the 76th percentile for violations within its industry-state peer group of 227 employers. Inspection frequency runs at the 39th percentile. The most recent enforcement activity was recorded 12 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CRYSTAL FINISHING SYSTEMS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.2 / yr · last 13 yrs
Violations
19
1.5 / yr
Penalties
$25,540
$1,344 avg / violation
74% serious26% other
Inspection trigger · complaint
2 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 19 citations in this view · $25,540 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C04 II B11$5,500Jun 2014Jun 2014
29 CFR 1910.0136 A11$4,200Feb 2013Feb 2013
29 CFR 1910.0107 C0611$2,640Feb 2013Feb 2013
29 CFR 1910.0106 D04 IV11$2,640Feb 2013Feb 2013
29 CFR 1910.0107 B0111$2,640Feb 2013Feb 2013
29 CFR 1910.1200 H02 II11$1,980Feb 2013Feb 2013
29 CFR 1910.0134 D01 III11$1,980Feb 2013Feb 2013
29 CFR 1910.0134 E0111$1,980Feb 2013Feb 2013
29 CFR 1910.0134 H02 I11$1,980Feb 2013Feb 2013
29 CFR 1910.0147 D04 I11Jun 2014Jun 2014
29 CFR 1910.0151 C11Jun 2014Jun 2014
29 CFR 1910.1200 H03 IV11Feb 2013Feb 2013
29 CFR 1910.0037 B0211Feb 2013Feb 2013
29 CFR 1910.0107 E0211Feb 2013Feb 2013
29 CFR 1910.0134 F0211Feb 2013Feb 2013
29 CFR 1910.0134 K11Feb 2013Feb 2013
29 CFR 1910.0176 B11Feb 2013Feb 2013
29 CFR 1910.1200 H03 II11Feb 2013Feb 2013
29 CFR 1910.0022 D0111Feb 2013Feb 2013

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

76th

Above average violations in NAICS 3328 within WI. Peer group: 227 employers. This establishment has 19 OSHA violations; peer median is 9.

Fewer violationsMore violations
Penalty percentile
91st
peer median: $4,177
Inspection frequency
39th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
5.9
vs industry
+2.8
TRIR
6.7
vs industry
+2.6

Reported for 690 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
3.1
BLS SOII 2024
Self-reported TRIR
6.7
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
12 years ago

No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CRYSTAL FINISHING SYSTEMS, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2014-04-17Complaint32$5,500
2012-10-23Complaint1612$20,040

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

CRYSTAL FINISHING SYSTEMS, INC. is one of 3 establishments rolled up under the parent organization Crystal Finishing Systems, Inc.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Crystal Finishing Systems, Inc across all 3 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within WI, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Crystal Finishing Systems, Inc, ordered by federal enforcement volume:

About this data

This profile aggregates federal enforcement records on CRYSTAL FINISHING SYSTEMS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Crystal Finishing Systems, Inc, which operates 3 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CRYSTAL FINISHING SYSTEMS, INC.'s OSHA violation history?
CRYSTAL FINISHING SYSTEMS, INC. has 2 OSHA inspections on record with 19 violations and $25,540 in total penalties.
How does CRYSTAL FINISHING SYSTEMS, INC.'s safety record compare to its industry?
CRYSTAL FINISHING SYSTEMS, INC. operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. CRYSTAL FINISHING SYSTEMS, INC.'s self-reported DART rate is 5.86 compared to an industry average of 3.1.