Skip to main content

Establishment profile

CLARK FOAM PRODUCTS CORPORATION

655 REMINGTON BLVD, BOLINGBROOK, IL, 60440
326140Polystyrene Foam Product Manufacturing

Download as PDF →

OSHA inspections
2
over 2 years
Violations
3
$20,000 in penalties
Penalties
$20,000
$6,667 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

CLARK FOAM PRODUCTS CORPORATION has accumulated 3 OSHA violations across 2 inspections over 2 years of recorded history, with $20,000 in total assessed penalties.

The establishment sits in the 45th percentile for violations within its industry-state peer group of 672 employers. Inspection frequency runs at the 50th percentile. The most recent enforcement activity was recorded 17 days ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CLARK FOAM PRODUCTS CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
1.0 / yr · last 2 yrs
Violations
3
1.5 / yr
Penalties
$20,000
$6,667 avg / violation
100% serious0% other
Inspection trigger · complaint
1 of 2
Inspection trigger · referral
1 of 2

50% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $20,000 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C0111$7,000Feb 2024Feb 2024
29 CFR 1910.0212 A0111$7,000Feb 2024Feb 2024
29 CFR 1910.0178 L01 I11$6,000Feb 2024Feb 2024

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

45th

Below average violations in NAICS 3261 within IL. Peer group: 672 employers. This establishment has 3 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
87th
peer median: $2,686
Inspection frequency
50th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for CLARK FOAM PRODUCTS CORPORATION. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.0
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
1
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CLARK FOAM PRODUCTS CORPORATION. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
17 days ago

Most recent federal enforcement activity recorded 17 days ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CLARK FOAM PRODUCTS CORPORATION. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CLARK FOAM PRODUCTS CORPORATION. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CLARK FOAM PRODUCTS CORPORATION. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CLARK FOAM PRODUCTS CORPORATION. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CLARK FOAM PRODUCTS CORPORATION. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CLARK FOAM PRODUCTS CORPORATION. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$56K
Awards
100
Top agency
General Services Administration
$41K
Top agencies by obligation (this location)
General Services Administration$41K
Department of Defense$10K
Department of Agriculture$5K
Largest awards (top 50 of 100)
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-03-13
    $7,738
  • Department of Defense
    6# ETHAFOAM BLOCKS
    contract · Last action 2012-05-30
    $5,750
  • Department of Agriculture
    PART # 100540582, ETHAFOAM M3 POLYETHYLENE FOAM PLANK, 2" X 24"X 108", COLOR BLACK, TRADEMARK SEALED AIR.
    contract · Last action 2013-07-11
    $5,181
  • General Services Administration
    CUSHIONING MATERIAL, PACKAGING:IAW FED SPEC PPP- C-843D, DTD 7/22/77, TYPE: II, CLASS: A, LONGITUDINALLY COMPRESSED; ONE STRIP, 1" T (COM- PRESSED STATE), 36" WIDE(COMPRESSED STATE), 20.8 FT LG (COMPRESSED STATE), NOMINAL EXPENDED L 100 FT. EXCEPTION TO THE SPEC: THICKNESS N/LESS THAN 85% OF THE THCKNS TESTED. PACKAGING/PACKING, THE CUSHIONING MATERIAL S/B PKGD IAW NRML COMML PRAC AND PKD TO ASSURE ACCEPTANCE BY COMMON CARRIER&PROVIDE PRDT PROTECTION AGAINST LOSS AND DAMAGE DURING MULTIPLE SHPMTS, HANDLING&STORAGE. THE SHIPPING CONTAINER S/B IN COMPLIANCE W/NMFC&UFC. MARKING: MARKING S/B IAW FED STD NO. 123. POC:MITCHELL JARVIS TEL:212-264-3349
    contract · Last action 2012-05-11
    $2,450
  • General Services Administration
    CUSHIONING MATERIAL, PACKAGING:IAW FED SPEC PPP- C-843D, DTD 7/22/77, TYPE: II, CLASS: A, LONGITUDINALLY COMPRESSED; ONE STRIP, 1" T (COM- PRESSED STATE), 36" WIDE(COMPRESSED STATE), 20.8 FT LG (COMPRESSED STATE), NOMINAL EXPENDED L 100 FT. EXCEPTION TO THE SPEC: THICKNESS N/LESS THAN 85% OF THE THCKNS TESTED. PACKAGING/PACKING, THE CUSHIONING MATERIAL S/B PKGD IAW NRML COMML PRAC AND PKD TO ASSURE ACCEPTANCE BY COMMON CARRIER&PROVIDE PRDT PROTECTION AGAINST LOSS AND DAMAGE DURING MULTIPLE SHPMTS, HANDLING&STORAGE. THE SHIPPING CONTAINER S/B IN COMPLIANCE W/NMFC&UFC. MARKING: MARKING S/B IAW FED STD NO. 123. NOTE: CUSTOMER AUTHORIZED TO INCREASE QTY FROM 3 TO 10 ROLLS.
    contract · Last action 2011-07-12
    $2,450
  • Department of Defense
    BUMPER, WK TK PART NUMBER: 13666153
    contract · Last action 2015-09-09
    $2,025
  • General Services Administration
    CUSHIONING MATERIAL, PACKAGING: ITEM NAME: CUSHI ONING MATERIAL, PKG IAW THE TECHNICAL DESCRIPTIO N LISTED BELOW. *OR EQUAL COMMERCIAL QUALIFYING VENDOR: ISO GROUP DBA ISO PARTS INC. CAGE CODE: 3EM17 LAS DEFENSE CAGE CODE: 6CG19 DIMENSIONS: O VERALL LENGTH: 18.00 INCHES NOMINAL OUTSIDE WIDT H: 6.00 INCHES NOMINAL OUTSIDE THICKNESS: 2.75 I NCHES NOMINAL SPECIAL FEATURES: CYLINDRICAL SHAP E WITH CUT-OUT RADIUS OF 1.75 INCHES. TECHNICAL DESCRIPTION: MATERIAL: POLYETHYLENE PLASTIC PLAS TIC CUSHION TOP
    contract · Last action 2012-07-24
    $1,920
  • Department of Defense
    BUMPER, WK TK PART NUMBER: 13666153
    contract · Last action 2014-05-27
    $1,778
  • General Services Administration
    CUSHIONING MATERIAL
    contract · Last action 2009-07-27
    $1,652
  • General Services Administration
    CUSHIONING MATERIAL
    contract · Last action 2009-06-22
    $1,470
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-06-27
    $1,430
  • General Services Administration
    CUSHIONING MATERIAL PACKAGING: UNCELLULAR PO LYETHYLENE IAW PPP-C-1752A. TYPE VII, CLASS 1, ROLL FORM. EXCEPTION TO SPEC DENSITY RANGE S/B 0.9-1.6 POUNDS CUBIC FT.ONE (1) ROLL 450 FT L, 60" W. 1/8" THICK. ROLLSPER PACKAGE-1 GSA BUYER: SUSAN KEMPLER (212) 264-7180
    contract · Last action 2011-09-15
    $1,220
  • General Services Administration
    TAS::17 1804::TAS CUSHIONING MATERIAL
    contract · Last action 2010-03-31
    $1,080
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-12-06
    $950
  • General Services Administration
    PN: SONDSCW3002GBK. ITEM: DSC-W300 CYBERSHOT DIGITAL CAMERABLACK. *******NOTE TO VENDOR******* ******DO NOT SHIP TO LINDEN NJ******* PLEASE SHIP TO THE FOLLOWING ADDRESS: DEPT OF STATE, GSO AMERICAN EMBASSY NEW DELHI C/O 44132 MERCURE CIRCLE STERLING, VA 20166 (CUSTOMER POC: GERALDINE.GLATTHORN@GSA.GOV) .
    contract · Last action 2009-09-23
    $857
  • Department of Defense
    BUMPER FOAM, W PART NUMBER: 13666137
    contract · Last action 2015-09-10
    $825
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-11-15
    $720
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-12-17
    $715
  • General Services Administration
    CUSHIONING MATERIAL PACKAGING: UNCELLULAR PO LYETHYLENE IAW PPP-C-1752A. TYPE VII, CLASS 1, ROLL FORM. EXCEPTION TO SPEC DENSITY RANGE S/B 0.9-1.6 POUNDS CUBIC FT.ONE (1) ROLL 450 FT L, 60" W. 1/8" THICK. ROLLSPER PACKAGE-1
    contract · Last action 2012-04-19
    $610
  • General Services Administration
    CUSHIONING MATERIAL PACKAGING: UNCELLULAR PO LYETHYLENE IAW PPP-C-1752A. TYPE VII, CLASS 1, ROLL FORM. EXCEPTION TO SPEC DENSITY RANGE S/B 0.9-1.6 POUNDS CUBIC FT.ONE (1) ROLL 450 FT L, 60" W. 1/8" THICK. ROLLSPER PACKAGE-1
    contract · Last action 2011-03-21
    $610
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-07-02
    $600
  • General Services Administration
    TAS::17 1804::TAS CUSHIONING MATERIAL
    contract · Last action 2010-06-01
    $528
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-06-24
    $528
  • General Services Administration
    CUSHIONING MATERIAL
    contract · Last action 2009-10-02
    $429
  • General Services Administration
    CUSHIONING MATERIAL
    contract · Last action 2011-12-21
    $392
  • General Services Administration
    TAS::97 4930::TAS CUSHIONING MATERIAL
    contract · Last action 2010-06-01
    $392
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-11-23
    $392
  • General Services Administration
    TAS::97 4930::TAS CUSHIONING MATERIAL, PACKAGING: I.A.W. P/N: SC12 0AS FROM SEALED AIR COPR. VN-11 FROM INDUSTRIAL SUPPLY CORP. OR, COMMERCIAL EQUIVALENT OVERALL L ENGTH: 500 FEET NOMINAL (PER ROLL) OVERALL WIDTH : 24.00 INCHES NOMINAL OVERALL THICKNESS: 0.188 INCHES NOMINAL SPECIAL FEATURES: 2 ROLLS PER BUN DLE; THIN BUBBLE BAG; IAW PPP-C-795, CLASS 2 MAT ERIAL: PLASTIC, CELLULAR
    contract · Last action 2010-07-14
    $358
  • General Services Administration
    TAS::97 4930::TAS CUSHIONING MATERIAL, PACKAGING: I.A.W. P/N: SC12 0AS FROM SEALED AIR COPR. VN-11 FROM INDUSTRIAL SUPPLY CORP. OR, COMMERCIAL EQUIVALENT OVERALL L ENGTH: 500 FEET NOMINAL (PER ROLL) OVERALL WIDTH : 24.00 INCHES NOMINAL OVERALL THICKNESS: 0.188 INCHES NOMINAL SPECIAL FEATURES: 2 ROLLS PER BUN DLE; THIN BUBBLE BAG; IAW PPP-C-795, CLASS 2 MAT ERIAL: PLASTIC, CELLULAR
    contract · Last action 2010-07-06
    $358
  • General Services Administration
    TAS::17 1804::TAS CUSHIONING MATERIAL, PACKAGING: I.A.W. P/N: SC12 0AS FROM SEALED AIR COPR. VN-11 FROM INDUSTRIAL SUPPLY CORP. OR, COMMERCIAL EQUIVALENT OVERALL L ENGTH: 500 FEET NOMINAL (PER ROLL) OVERALL WIDTH : 24.00 INCHES NOMINAL OVERALL THICKNESS: 0.188 INCHES NOMINAL SPECIAL FEATURES: 2 ROLLS PER BUN DLE; THIN BUBBLE BAG; IAW PPP-C-795, CLASS 2 MAT ERIAL: PLASTIC, CELLULAR
    contract · Last action 2010-07-06
    $358
  • General Services Administration
    CUSHIONING MATERIAL, PACKAGING: I.A.W. P/N: SC12 0AS FROM SEALED AIR COPR. VN-11 FROM INDUSTRIAL SUPPLY CORP. OR, COMMERCIAL EQUIVALENT OVERALL L ENGTH: 500 FEET NOMINAL (PER ROLL) OVERALL WIDTH : 24.00 INCHES NOMINAL OVERALL THICKNESS: 0.188 INCHES NOMINAL SPECIAL FEATURES: 2 ROLLS PER BUN DLE; THIN BUBBLE BAG; IAW PPP-C-795, CLASS 2 MAT ERIAL: PLASTIC, CELLULAR
    contract · Last action 2009-10-09
    $358
  • General Services Administration
    CUSHIONING MATERIAL POC:MITCHELL JARVIS TEL:212-264-3349
    contract · Last action 2012-04-10
    $294
  • General Services Administration
    CUSHIONING MATERIAL: MIL -P-26514E, TYPE 1, CLASS 2, 14" LONG, 13-7/8" WIDE 1" THICK. GRADE C.
    contract · Last action 2009-09-23
    $288
  • General Services Administration
    CUSHIONING MATERIAL: MIL -P-26514E, TYPE 1, CLASS 2, 14" LONG, 13-7/8" WIDE 1" THICK. GRADE C.
    contract · Last action 2009-09-16
    $288
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-01-26
    $288
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-12-23
    $288
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-10-15
    $277
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-11-15
    $264
  • General Services Administration
    CUSHIONING MATERIAL, PACKAGING: ITEM NAME: CUSHI ONING MATERIAL, PKG IAW THE TECHNICAL DESCRIPTIO N LISTED BELOW. *OR EQUAL COMMERCIAL QUALIFYING VENDOR: ISO GROUP DBA ISO PARTS INC. CAGE CODE: 3EM17 LAS DEFENSE CAGE CODE: 6CG19 DIMENSIONS: O VERALL LENGTH: 18.00 INCHES NOMINAL OUTSIDE WIDT H: 6.00 INCHES NOMINAL OUTSIDE THICKNESS: 2.75 I NCHES NOMINAL SPECIAL FEATURES: CYLINDRICAL SHAP E WITH CUT-OUT RADIUS OF 1.75 INCHES. TECHNICAL DESCRIPTION: MATERIAL: POLYETHYLENE PLASTIC PLAS TIC CUSHION TOP
    contract · Last action 2012-01-16
    $240
  • General Services Administration
    CUSHIONING MATERIAL, PACKAGING: ITEM NAME: CUSHI ONING MATERIAL, PKG IAW THE TECHNICAL DESCRIPTIO N LISTED BELOW. *OR EQUAL COMMERCIAL QUALIFYING VENDOR: ISO GROUP DBA ISO PARTS INC. CAGE CODE: 3EM17 LAS DEFENSE CAGE CODE: 6CG19 DIMENSIONS: O VERALL LENGTH: 18.00 INCHES NOMINAL OUTSIDE WIDT H: 6.00 INCHES NOMINAL OUTSIDE THICKNESS: 2.75 I NCHES NOMINAL SPECIAL FEATURES: CYLINDRICAL SHAP E WITH CUT-OUT RADIUS OF 1.75 INCHES. TECHNICAL DESCRIPTION: MATERIAL: POLYETHYLENE PLASTIC PLAS TIC CUSHION TOP
    contract · Last action 2012-01-16
    $240
  • General Services Administration
    CUSHIONING MATERIAL
    contract · Last action 2011-05-24
    $240
  • General Services Administration
    TAS::17 1806::TAS CUSHIONING MATERIAL
    contract · Last action 2010-06-29
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2009-01-06
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-09-09
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-06-26
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-05-28
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-02-26
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2008-02-26
    $240
  • General Services Administration
    DESCR N.A.
    contract · Last action 2007-10-16
    $240
  • General Services Administration
    CUSHIONING MATERIAL: MIL -P-26514E, TYPE 1, CLASS 2, 14" LONG, 13-7/8" WIDE 1" THICK. GRADE C.
    contract · Last action 2009-09-29
    $216

Federal contract dollars to this establishment. Primary NAICS: 326150 - URETHANE AND OTHER FOAM PRODUCT (EXCEPT POLYSTYRENE) MANUFACTURING. Last action: 2019-04-11. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2026-06-09Complaint0$0
2023-12-01Referral33$20,000

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in polystyrene foam product manufacturing within IL, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CLARK FOAM PRODUCTS CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CLARK FOAM PRODUCTS CORPORATION's OSHA violation history?
CLARK FOAM PRODUCTS CORPORATION has 2 OSHA inspections on record with 3 violations and $20,000 in total penalties.
How does CLARK FOAM PRODUCTS CORPORATION's safety record compare to its industry?
CLARK FOAM PRODUCTS CORPORATION operates in the polystyrene foam product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.